The high-voltage battery is a crucial element for EV traction systems. It is the primary energy source that must be regularly recharged to reach the autonomy declared by the manufacturer. Therefore, an EV charging system is required to ensure the battery charging process. This review thoroughly investigates the available EV charging technologies and the most popular batteries for EV applications. The contributions of this work can be summarized as follows: the classification and topologies of electric vehicle chargers are examined, an overview of the current EV charging standards is provided, the state-of-the-art of EV charging couplers is discussed, and the most widely used batteries in EV applications are reviewed.

The main component of the hydrogen production system is the electrolyzer (EL), which is used to convert electrical energy and water into hydrogen and oxygen. The power converter supplies the EL, and the controller is used to ensure the global stability and safety of the overall system. This review aims to investigate and analyze each one of these components: Proton Exchange Membrane Electrolyzer (PEM EL) electrical modeling, DC/DC power converters, and control approaches. To achieve this desired result, a review of the literature survey and an investigation of the PEM EL electrical modeling of the empirical and semi-empirical, including the static and dynamic models, are carried out. In addition, other sub-models used to predict the temperature, gas flow rates (H₂ and O₂), hydrogen pressure, and energy efficiency for PEM EL are covered. DC/DC power converters suitable for PEM EL are discussed in terms of efficiency, current ripple, voltage ratio, and their ability to operate in the case of power switch failure. This review involves analysis and investigation of PEM EL control strategies and approaches previously used to achieve control objectives, robustness, and reliability in studying the DC/DC converter-PEM electrolyzer system. The paper also highlights the online parameter identification of the PEM electrolyzer model and adaptive control issues. Finally, a discussion of the results is developed to emphasize the strengths, weaknesses, and imperfections of the literature on this subject as well as proposing ideas and challenges for future work.

Wireless power transfer (WPT) chargers are promising solutions for charging electric vehicles (EVs). Due to their advantages such as ease and safety of use, these chargers are increasingly replacing conductive ones. In this paper, we first provide a detailed analysis to illustrate the effect of varying parameters on the operation of the WPT charger. Secondly, we present the main design steps of the charger elements while respecting the recommendations of the SAEJ2954 standard in terms of operating frequency, efficiency and misalignments. Regarding the design of the ground-side and vehicle-side coils, we propose three different circular geometries whose parameters are determined using an iterative approach. The latter is compared with a finite element analysis performed under Ansys Maxwell software showing the convergence between theoretical calculations and the simulation results. Finally, an experimental prototype with a power of 500 W is realized. In addition, different test scenarios are performed to validate the proposed design approach. In this respect, an efficiency of 90% is obtained for a power of 500 W and a distance between coils of 125 mm. Moreover, the test of the charger in the most unfavorable operating case (misalignments of Δx = 70 mm, Δy = 10 mm and Δz = 150 mm) gives an efficiency of 83.5%, which remains above the limit of the SAEJ2954 standard.

In this paper, a unidirectional wireless power transfer (WPT) system for battery electric vehicle (BEV) charger is addressed. Firstly, a detailed analysis is given focusing on the following points: (i) phase shift control technique, (ii) reactive power compensation topologies and (iii) total harmonic distortion analysis. Secondly, a mathematical model is established for the studied system and its stability is discussed. It was found that the system presents an unstable behaviour when the voltage across the load is chosen as the system output. This non-minimum phase feature is dealt with using an indirect control strategy. Thirdly, based on the derived mathematical model, a non-linear controller using sliding mode control technique is developed. The control objectives are twofold: (i) tight regulation of the output load voltage and (ii) asymptotic stability of the closed loop system. It is shown using theoretical analysis and simulation that the proposed controller meets all objectives.