Gordon Walter Roberts

Prof. Gordon Walter Roberts

orcid

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 March 2018 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
SZSoheyl Ziabakhsh
Soheyl Ziabakhsh
GGGhyslain Gagnon
Ghyslain Gagnon
GRGordon Walter Roberts
Gordon Walter Roberts
Representing signals in the time domain, as pulses of variable time duration, is a promising solution for analog signal processing in CMOS technologies with low supply voltages. This paper aims at determining the peak SNR of a PMOS-NMOS transistor stack used in both voltage-mode and time-mode circuits. A detailed noise analysis which includes both thermal and flicker noise contributions is performed in both domains. The analysis is applied to different CMOS technology nodes and compared to Spectre transient noise analysis tools. A silicon prototype was fabricated in the IBM 130-nm CMOS technology. Measurements confirm the accuracy of the proposed analysis.

13 December 2018 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
SZSoheyl Ziabakhsh
Soheyl Ziabakhsh
GGGhyslain Gagnon
Ghyslain Gagnon
GRGordon Walter Roberts
Gordon Walter Roberts
This paper presents an all-digital bandpass ΔΣ time-to-digital converter (BP)ΔΣTDC) for IF data conversion. The proposed TDC is based on a second-order resonator implemented by a cascade of two time-mode lossless discrete integrators (LDI), and a digital-to-time converter (DTC) in a feedback loop. The DTC is based on a new topology of doubleedge voltage-controlled delay unit. The proposed TDC achieves bandpass quantization noise shaping and it does not require any complex calibration circuit to compensate for timing errors. To realize the time-mode LDI-based resonator, time-latches with some digital gates are employed. Moreover, a direct feed-forward compensation is utilized in the TDC to attain high signal-tonoise and distortion ratio (SNDR) by reducing the internal timemode swing, thus relaxing the speed and area requirements on digital circuits leading to low-voltage operation. The prototype BPΔΣTDC achieves a 39.5-dB peak SNDR over a 0.2 MHz signal bandwidth at 42.8 MS/s while consuming less than 5 mW in a 1.2 V IBM 130-nm CMOS process. The proposed TDC is highly digital and occupies a core area of only 0.048 mm 2 .

2 November 2022 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Open access
MMMahmood A. Mohammed
Mahmood A. Mohammed
GRGordon Walter Roberts
Gordon Walter Roberts
This work introduces a multi-stage CMOS OTA design technique that allows cascading identical gain stages (for arbitrarily scalable high DC gain) while driving an ultra-wide range of capacitive loads (C $_{\text{L}}$ s). At the heart of the proposed design is a new frequency compensation technique (FCT) that relies on low-frequency left-half-plane zeros to allow the proposed OTA to operate for a desired closed-loop behavior. In this work, classical gain-stages (i.e., differential pair and common source transistors) are used to design fully-differential 2-, 3-, 4-and 5-stage CMOS OTAs. The proposed 2-to-4-stage designs have been fabricated in TSMC 65 nm CMOS process and the measurement results show that the 2-stage OTA is achieving a DC gain of 50 dB with a C $_{\text{L}}$ -drivability ratio (i.e., C $_{\text{L,max}}$ /C $_{\text{L,min}}$ ) of 10,000 $\times$ , the 3-stage OTA is achieving a DC gain of 70 dB with a C $_{\text{L}}$ -drivability of 1,000,000 $\times$ , and the 4-stage OTA is achieving a DC gain of 90 dB with a C $_{\text{L}}$ -drivability of 1,000,000 $\times$ . This is a 10-to-1000-time improvement in the state-of-the-art, as the highest C $_{\text{L}}$ -drivability reported to date is 1000 $\times$ . Accordingly, the proposed OTAs can cover a wider range of applications than any other reported works.

31 August 2021 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
AEAhmed S. Emara
Ahmed S. Emara
DRDenis Romanov
Denis Romanov
GRGordon Walter Roberts
Gordon Walter Roberts
SASadok Aouini
Sadok Aouini
SZSoheyl Ziabakhsh
Soheyl Ziabakhsh
NBNaim Ben-Hamida
Naim Ben-Hamida
Sigma–delta ( $\Sigma \Delta$ ) digital-to-analog converters (DACs) are commonly used to realize programmable dc voltage generators in built-in self-test (BIST) schemes, largely on account of their high linearity. Unfortunately, such $\Sigma \Delta $ -DACs require large amounts of digital memory and a reconstruction filter with a large silicon area footprint. In this article, a segmented DAC architecture is proposed. The proposed architecture is realized using two sub-DACs, where both are $\Sigma \Delta $ -based. This DAC provides two advantages: filter footprint size reduction and memory savings, thereby allowing for a simpler BIST solution. The benefits of using the segmented $\Sigma \Delta $ -DAC are shown using two experimental prototypes. The first is an IC prototype design using the TSMC 65-nm CMOS technology. It will be shown that the IC achieves 12 bits of resolution from 1020 memory elements, whereas an unsegmented $\Sigma \Delta $ -DAC uses 4095 elements to obtain the same resolution. This is about a 75% savings in memory elements. The segmented prototype occupies 0.5 mm 2 of silicon area, whereas the unsegmented design occupies 0.77 mm 2 for the same resolution. A 35% silicon area savings compared with its unsegmented counterpart. A second prototype implements the segmented $\Sigma \Delta $ -DAC architecture using discrete components. The discrete prototype achieves 16 bits of resolution from 1020 memory elements, whereas the unsegmented counterpart uses 65 535 bits for the same resolution. This is a 98% saving in memory elements.

7 December 2016 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
MAMoataz Abdelfattah
Moataz Abdelfattah
GRGordon Walter Roberts
Gordon Walter Roberts
In this brief, the design of time-mode signal processing (TMSP) circuits having an all-digital advantage is introduced and experimental data covering all necessary aspects of operation such as frequency response are presented. TMSP building blocks were used to design two second-order filter prototypes having Butterworth and Chebychev I responses demonstrating peak signal-to-noise-plus-distortion values of 47 dB and 37 dB, respectively, making it a good candidate for data conversion applications.

2 November 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Open access
MMMahmood A. Mohammed
Mahmood A. Mohammed
GRGordon Walter Roberts
Gordon Walter Roberts
The presence of Pole-Zero (P-Z) pairs in the open-loop frequency response of CMOS OTAs has always been considered detrimental to the closed-loop operation of OTAs. In this work, a new proposed theory is presented showing how to reduce the impact of such P-Z pairs on the settling time of CMOS OTAs - using low-frequency zeros and cascaded-gain stages - consequently revealing un-tapped opportunities for many-stage CMOS OTA design. The proposed theory will be validated and verified through a design example that also demonstrates how the generalized theory unveils opportunities for many-stage OTA design. The presented example is a 2- to 8-stage CMOS OTA based on the TSMC 65 nm CMOS process, verified through simulations (schematic and post-layout) as well as some measurement results.