Currently, a large amount of pharmaceutical waste (PW) and its derivatives are being produced and, in some cases, inadequate management or treatment practices are applied. In this regard, this research explores the adoption of several alternatives to deal with these problems, including biocarbon within the framework of the circular economy. Photocatalytic nanomaterials have been also extensively discussed as a feasible way to remove pharmaceutical compounds in wastewater. Although there are existing reports in this area, this document provides a detailed study of the synthesis process, experimental conditions, the integration of photocatalysts, and their impact on enhancing photocatalytic efficiency. Additionally, the low cost and ease of fabrication of lab-scale microbial fuel cells (MFCs) are thoroughly examined. This innovative technology not only facilitates the degradation of hazardous compounds in wastewater but also harnesses their energy to generate electricity simultaneously. The aforementioned approaches are covered and discussed in detail by documenting interesting recently published research and case studies worldwide. Furthermore, this research is of significant importance because it addresses the valorization of PW by generating valuable by-products, such as H₂ and O₂, which can occur simultaneously during the photodegradation process, contributing to more sustainable industrial practices and clean energy technologies.

Hydrogen and oxygen serve as energy carriers that can ease the transition of energy due to their high energy densities. Nonetheless, their production processes entail the development of efficient and low-cost storage and conversion technologies. In this regard, photoelectrocatalysts are materials based on the photoelectronic effect where electrons and holes interact with H₂O, producing H₂ and O_2, and in some cases, this is achieved with acceptable efficiency. Although there are several reviews on this topic, most of them focus on traditional semiconductors, such as TiO₂ and ZnO, neglecting others, such as those based on non-noble metals and organic ones. Herein, semiconductors like CdSe, NiWO₄, Fe₂O₃, and others have been investigated and compared in terms of photocurrent density, band gap, and charge transfer resistance. In addition, this brief review aims to discuss the mechanisms of overall water-splitting reactions from a photonic point of view and subsequently discusses the engineering of material synthesis. Advanced composites are also addressed, such as WO₃/BiVO₄/Cu₂O and CN-FeNiOOH-CoOOH, which demonstrate high efficiency by delivering photocurrent densities of 5 mAcm⁻² and 3.5 mA cm⁻² at 1.23 vs. RHE, respectively. Finally, the authors offer their perspectives and list the main challenges based on their experience in developing semiconductor-based materials applied in several fields. In this manner, this brief review provides the main advances in these topics, used as references for new directions in designing active materials for photoelectrocatalytic water splitting.

In the present work, photoanodes for dye-sensitised solar cell (DSSC) composed of SnO₂ nanoparticles were developed by electrophoretic deposition (EPD) process . Taguchi experimental design was adopted to investigate the effect of EPD parameters into the physical and chemical properties of the deposited film. The deposited photoanodes were characterized by scanning electron microscopy (SEM) and optical microscope. Also, electrical measurements were conducted with the aim to evaluate the effect of the deposition parameters on the DSSC current density. The experimental results reveal that magnesium nitrate concentration has the most significant effect on the photocurrent densities followed by the time of deposition. It has been observed that the deposition parameters studied greatly influence the morphology of the obtained film. This indicates that the electrophoretic deposition process under a Taguchi design orthogonal array might be a cost efficient method to develop anodes for DSSC.

This work proposes the use of albedo of orange peel in generation of carbon for applications in supercapacitors. For this, a comparison of compositional and electrochemical properties present in the carbons obtained of albedo, flavedo, and the complete orange peel was carried out. The morphology and composition of carbons obtained were analyzed by Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray (EDX), X-Ray Diffraction (XRD), and Fourier-transform infrared spectroscopy (FT-IR). The synthetized carbons were not subjected to the activation process by chemical compounds to relate only the properties of orange peel parts with their electrochemical behaviour. All samples were tested by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The carbon obtained of albedo presented a superior specific capacitance (210 F/g) of the rest samples. The value of albedo-based carbon capacitance is comparable with works presented in the literature that used a whole orange peel with chemical activators. In this way, it is possible to obtain large capacitances using only a part of orange peel (albedo). Thus, the importance of this study is that the albedo can be proposed as a material applied to electrodes for supercapacitors while the flavedo can be used in food industry or for oil extraction.