The Dadu River travels in the mountainous areas of southwestern China, one of regions with the most hazards that has long suffered from frequent geohazards. The early identification of landslides in this region is urgently needed, especially after the recent Luding earthquake (MS 6.8). While conventional ground-based monitoring techniques are limited by the complex terrain conditions in these alpine valley regions, space interferometric synthetic aperture radar (InSAR) provides an incomparable advantage in obtaining surface deformation with high precision and over a wide area, which is very useful for long-term and slow geohazard monitoring. In this study, more than 500 Sentinel-1 SAR images with four frames acquired during 2017~2022 were collected to detect the hidden landslide regions from the Jinchuan to Ebian Section along the Dadu River, based on joint-scatterer InSAR (JS-InSAR) and small baseline subset (SBAS) techniques. The results showed that our method could be successfully applied for landslide monitoring in complex mountainous regions. Furthermore, 143 potential landslide regions spreading over an 800 km area along the Dadu River were extracted by integrating the deformation measurements and optical images. Our study can provide a reference for large-scale geological hazard surveys in mountainous areas, and the InSAR technique will be encouraged for the local government in future long-term monitoring applications in the Dadu River Basin.

Synthetic Aperture Radar (SAR) is extensively utilized in ship detection due to its robust performance under various weather conditions and its capability to operate effectively both during the day and at night. However, ships in SAR images exhibit various characteristics including complex land scattering interference, variable scales, and dense spatial arrangements. Existing algorithms are insufficient in effectively addressing these challenges. To enhance detection accuracy, this paper proposes the Rotated model with Spatial Aggregation and a Balanced-Shifted Mechanism (R-SABMNet) built upon YOLOv8. First, we introduce the Spatial-Guided Adaptive Feature Aggregation (SG-AFA) module, which enhances sensitivity to ship features while suppressing land scattering interference. Subsequently, we propose the Balanced Shifted Multi-Scale Fusion (BSMF) module, which effectively enhances local detail information and improves adaptability to multi-scale targets. Finally, we introduce the Gaussian Wasserstein Distance Loss (GWD), which effectively addresses localization errors arising from angle and scale inconsistencies in dense scenes. Our R-SABMNet outperforms other deep learning-based methods on the SSDD+ and HRSID datasets. Specifically, our method achieves a detection accuracy of 96.32%, a recall of 93.13%, and an average level of accuracy of 95.28% on the SSDD+ dataset.

With the rapid development of microwave remote sensing and SAR satellite systems, the use of InSAR techniques has been greatly encouraged due to the abundance of SAR data with unprecedented temporal and spatial coverage. Small Baseline Subset (SBAS) is a promising time-series InSAR method for applications involving deformation monitoring of the Earth’s crust, and the sequential SBAS method is an extension of SBAS that allows long-term and large-scale surface displacements to be obtained with continuously auto-updating measurement results. As the Chinese LuTan-1 SAR system has begun acquiring massive SAR image data, the need for an efficient and lightweight InSAR processing platform has become urgent in various research fields. However, traditional sequential algorithms are incapable of meeting the huge challenges of low efficiency and frequent human interaction in large-scale InSAR data processing. Therefore, this study proposes a distributed parallel sequential SBAS (P2SBAS) processing chain based on Hadoop by effectively parallelizing and improving the current sequential SBAS method. P2SBAS mainly consists of two components: (1) a distributed SAR data storage platform based on HDFS, which supports efficient inter-node data transfer and continuous online data acquisition, and (2) several parallel InSAR processing algorithms based on the MapReduce model, including image registration, filtering, phase unwrapping, sequential SBAS processing, and so on. By leveraging the capabilities associated with the distributed nature of the Hadoop platform, these algorithms are able to efficiently utilize the segmentation strategy and perform careful boundary processing. These parallelized InSAR algorithm modules can achieve their goals on different nodes in the Hadoop distributed environment, thereby maximizing computing resources and improving the overall performance while comprehensively considering performance and precision. In addition, P2SBAS provides better computing and storage capabilities for small- and medium-sized teams compared to popular InSAR processing approaches based on cloud computing or supercomputing platforms, and it can be easily deployed on clusters thanks to the integration of various existing computing components. Finally, to demonstrate and evaluate the efficiency and accuracy of P2SBAS, we conducted comparative experiments on a set of 32 TerraSAR images of Beijing, China. The results demonstrate that P2SBAS can fully utilize various computing nodes to improve InSAR processing and can be applied well in large-scale LuTan-1 InSAR applications in the future.

In recent decades, the interferometric synthetic aperture radar (InSAR) technique has emerged as a powerful tool for monitoring ground subsidence and geohazards. Various satellite SAR systems with different modes, such as Sentinel-1 and Lutan-1, have produced abundant SAR datasets with wide coverage and large historical archives, which have significantly influenced long-term deformation monitoring applications. However, large-scale InSAR data have posed significant challenges to conventional InSAR methods. These issues include the computational burden and storage of multi-temporal InSAR (MT-InSAR) methods, as well as temporal decorrelation for coherent scatterers with long temporal baselines. In this study, we propose a stepwise MT-InSAR with a temporal coherent scatterer method to address these problems. First, a batch sequential method is introduced in the algorithm by grouping the SAR dataset in the time domain based on the average coherence distribution and then applying permanent scatterer interferometry to each temporal subset. Second, a multi-layer network is employed to estimate deformation for partially coherent scatterers using small baseline subset interferograms, with permanent scatterer deformation parameters as the reference. Finally, the final deformation rate and displacement time series were obtained by incorporating all the temporal subsets. The proposed method efficiently generates high-density InSAR deformation measurements for long-time series analysis. The proposed method was validated using 9 years of Sentinel-1 data with 229 SAR images from Jakarta, Indonesia. The deformation results were compared with those of conventional methods and global navigation satellite system data to confirm the effectiveness of the proposed method.

Background: Sleep staging is important for assessing sleep architecture and supporting the diagnosis of sleep-related disorders. Manual scoring is time-consuming and subject to inter-scorer variability, while joint modeling of EEG channel relationships and frequency characteristics remains challenging. Methods: We propose DCMG-Net (dual-branch CNN and context-gated multi-view graph network), a frequency-aware network combining multi-view graph convolution with context gating for five-class sleep staging using EEG alone. Multiscale convolutions and attention extract channel features. Functional, globally learnable, and four physiological frequency-band adjacency matrices define six graph views, whose representations are adaptively fused by context gating. Results: On Sleep-EDF-20, ISRUC-S3, and the Sleep Heart Health Study (SHHS), overall accuracies were 91.2%, 90.0%, and 86.3%; macro-F1 scores were 84.4%, 88.7%, and 77.2%; and Cohen’s κ values were 0.88, 0.87, and 0.81, respectively. Macro-F1 exceeded the highest values reported by the compared literature methods by 1.9, 4.2, and 0.7 percentage points, respectively. In the ablation experiments, gating improved macro-F1 over direct concatenation by 6.1 and 2.3 percentage points on ISRUC-S3 and SHHS. Conclusions: Frequency-band topology and context gating jointly exploit EEG frequency information and channel relationships to improve multi-view classification, providing a methodological basis for portable sleep monitoring and computer-assisted clinical scoring.

Synthetic Aperture Radar (SAR) and Interferometric SAR (InSAR) techniques have received rapid advance in recent years, and the Multi-temporal InSAR (MT-InSAR) has been widely applied in various earth observations. Distributed scatterer (DS) InSAR is one of the most advanced MT-InSAR methods, and has overcome the limitation of the lack of enough measurement points in the low coherent regions for traditional methods. While the Joint-Scatterer InSAR (JS-InSAR) is the extension of DS InSAR method, which exploited the overall information of Joint Scatterers to carry out DS identification and phase optimization. And it can avoid the inaccuracy caused by the offset errors between scatterers in complex terrain areas. However, the intensive computation and low efficiency have severely restricted the application of JS-InSAR, especially when dealing with massive and long historical SAR images. As the sequential estimator has proven to successfully improve the efficiency of MT-InAR and obtain near-time deformation time series, in this work, we proposed the sequential-based JS-InSAR (S-JSInSAR) method with flexible batches. This method has adaptively divided large single look complex (SLC) stack into different batches with flexible number and certain overlaps. Then, the JS-InSAR processing is performed on each batch, respectively, and these estimated results are integrated into the final deformation time series based on the connection mode. Thus, S-JSInSAR can efficiently process large InSAR dataset, and mitigate the decorrelation effect caused by long temporal baselines. To demonstrate the effectiveness of the S-JSInSAR, a multi-year of 145 Sentinel-1 ascending SAR images in Tangshan, China, were collected to estimate the long deformation time series. And the results compared with other methods have shown the processing time has substantially decreased without the loss of deformation accuracy, and obtain deformation spatial distribution with more details in local regions, which have well validated the efficiency and reliability of the proposed method.