Yabin Gao

Dr. Yabin Gao

College of Safety and Emergency Management Engineering, Taiyuan University of Technology, Taiyuan 030024, China
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 July 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
YGYabin Gao
Yabin Gao
PHPeizhuang Han
Peizhuang Han
FWFei Wang
Fei Wang
JCJing Cao
Jing Cao
SZShaoqi Zhang
Shaoqi Zhang
Water jet technology is an effective measure by which to improve the efficiency of deep coalbed methane mining. Nevertheless, the effect of a water jet impinging on coal rock remains unclear. In this study, numerical simulation is used to analyze a water jet impingement drill test block, after which experimental verification is carried out. Next, on the basis of the experimental verification that the simulation method is feasible, the influence factors of the water jet impingement in the drill hole are analyzed. It is concluded that the phase-field variables based on the fracture change method can effectively characterize the damage and destruction of coal rock. The water jet impact in the borehole has a central damage failure zone and two-side damage failure zone, and the damage failure ratio n is used to characterize the degree of damage to the coal rock. When the jet target distance is 70 mm, the damage ratio n is closest to 1, and the effect of water jet impact on coal-rock is the best. When the wall roughness is less than 10 mm, the blocking effect on the jet is dominant, resulting in a negative correlation between the damage size and the roughness. When the wall roughness exceeds 10 mm, the development of cracks and the connection effect exceed the blocking effect, resulting in larger damage. Therefore, it can be seen that the effect of a water jet impacting on coal rock is positively related to jet pressure. When the jet target distance is 70 mm, the damage range of 30 MPa jet pressure to the center and both sides of the coal rock reaches about 1.1 m, thus signifying a good coal rock breaking effect. The wall roughness has a significant effect on the coal rock breaking effect of the water jet.

19 May 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
CLChangkui Lei
Changkui Lei
Xueqiang ShiXueqiang Shi
Xueqiang Shi
LJLijuan Jiang
Lijuan Jiang
CDcunbao Deng
cunbao Deng
JNJun Nian
Jun Nian
YGYabin Gao
Yabin Gao
Coal spontaneous combustion in underground mine goaf has a great impact on coal mining. The temperature-programmed experiment is a commonly used and effective method for studying the characteristics of coal spontaneous combustion. Aiming at the problem that the numerical simulation of coal spontaneous combustion characteristics under the condition of external air supply and temperature control in a temperature-programmed experiment is insufficient, a multi-physical field coupling numerical model of coal spontaneous combustion in the temperature-programmed experiment is established. The variation characteristics of coal temperature, oxygen, and oxidation products under external air supply and temperature control were studied. The results show that the numerical simulation results are consistent with the experimental results. With the increase in temperature, the volume fractions of oxygen and carbon dioxide decrease and increase, respectively. As the air supply volume increases, the oxygen volume fraction at the outlet increases, and the peak value of the oxygen volume fraction change rate exhibits a “hysteresis” feature, and the time corresponding to the peak value increases. Moreover, the temperature change rate increases. With the increase in the heating rate, the peak value of the oxygen volume fraction change rate increases and shows an “early appearance” characteristic, at the same time, the maximum coal temperature displays a linear increase trend.

30 November 2021 in Energy Exploration & Exploitation
Verified
Journal Article
Open access
PDF file
YGYabin Gao
Yabin Gao
XXXin Xiang
Xin Xiang
ZLZiwen Li
Ziwen Li
XGXiaoya Guo
Xiaoya Guo
PHPeizhuang Han
Peizhuang Han
Hydraulic slotting has become one of the most common technologies adopted to increase permeability in low permeability in coal field seams. There are many factors affecting the rock breaking effects of water jets, among which the impact force cannot be ignored. To study the influencing effects of contact surface shapes on jet flow patterns and impact force, this study carried out experiments involving water jet impingement planes and boreholes under different pressure conditions. The investigations included numerical simulations under solid boundary based on gas–liquid coupling models and indoor experiments under high-speed camera observations. The results indicated that when the water jets impinged on different contact surfaces, obvious reflection flow occurred, and the axial velocity had changed through three stages during the development process. Moreover, the shapes of the contact surfaces, along with the outlet pressure, were found to have impacts on the angles and velocities of the reflected flow. The relevant empirical formulas were summarized according to this study's simulation results. In addition, the flow patterns and shapes of the contact surfaces were observed to have influencing effects on the impact force. An impact force model was established in this study based on the empirical formula, and the model was verified using both the simulation and experimental results. It was confirmed that the proposed model could provide important references for the optimization of the technical parameters water jet systems, which could provide theoretical support for the further intelligent and efficient transformation of coal mine drilling water jet technology.

18 July 2022 in ACS Omega
Verified
Journal Article
Open access
YGYabin Gao
Yabin Gao
JRJie Ren
Jie Ren
In the coal mine industry, the instability failure of an extraction borehole is one of the main factors leading to the decrease in gas extraction rate. The study on borehole strength and failure mode with different sizes can provide a theoretical basis for the optimization and selection of a gas extraction borehole. In this paper, biaxial loading tests are carried out on similar coal specimens, and the prediction model of borehole strength is proposed and verified. At the same time, numerical simulation of similar specimens is carried out to analyze the failure process of boreholes of different sizes. The results show that hole size has a great influence on hole strength, and the hole strength decreases with an increase of hole size. Size change has a great influence on the strength of a small-size borehole, and the strength of the borehole gradually stabilizes with an increase of size. The process of borehole failure can be divided into three stages, borehole top failure, borehole deformation, and crack extension. Stress concentration and a large number of cracks occur on the two wings of the borehole, and these cracks reduce the strength of the borehole. The stress concentration area of the borehole is X-shaped distribution, and the through crack mainly extends along this area and leads to the failure of the specimen.

22 August 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
YGYabin Gao
Yabin Gao
JCJing Cao
Jing Cao
SZShaoqi Zhang
Shaoqi Zhang
ZLZiwen Li
Ziwen Li
The comparative analysis of coal samples under different gas occurrence conditions systematically reveals the pore structure characteristics of coal and gas outburst coal seams. The functional relationship between R0,max and Kc was clarified using mathematical statistical methods, and the pore structure and fractal characteristics of coal and gas outburst coal seams were analyzed on the basis of modified mercury pressure data and fractal analysis. The results show that the functional relationship between R0,max and Kc is consistent with y = 1.59x−0.48, and when the mercury inlet pressure is 10~120 MPa, the coal sample is the most affected by the matrix compression effect. The average pore volume and average specific surface area of the outburst coal samples were 41.71% and 23.09%, which is greater than those of the non-outburst coal samples, respectively, and the specific surface area and pore volume provided by the outburst mining micropores were 46.24% and 81.67%, respectively. The fractal dimension, D, of the coal seam increased with the increase in metamorphism, and compared with low gas mines, the fractal dimension of coal samples in the coal and gas outburst mines was higher, the influence of the matrix compression effect was more obvious, and the heterogeneity was stronger.

16 June 2022 in Energy Science & Engineering
Verified
Journal Article
Open access
PHPeizhuang Han
Peizhuang Han
YGYabin Gao
Yabin Gao
FWFei Wang
Fei Wang
JRJie Ren
Jie Ren
HZHao Zheng
Hao Zheng
The design of the contact surface has a big impact on how well water jets penetrate coal rock. The influence of water jets on contact surfaces with various curvatures is studied using numerical modeling to elucidate the flow field and coal seam damage characteristics. The water jet impingement flow field region can be separated into three areas: velocity concentration, divergent flow, and wall recirculation. As the jet water pressure rises, the flow field's distribution features become more apparent. Water jet impact morphology and flow field properties on contact surfaces of various curvatures are comparable. The peak velocity ratio of the wall and axis falls first, then increase as the curvature radius ratio (n) of the contact surface increases. Near n = 0.8, the peak velocity ratio of the wall and axis reaches a minimum, indicating that the kinetic energy loss in the process of water jet impact to the contact surface is the greatest. When water jets of various pressures impact the contact surface, the peak velocity drops by two‐thirds before and after impact, and nearly 89% of the kinetic energy is lost in the impact process. The range of the initial damage and failure area in the center of the contact surface and the initial damage and failure area on both sides of the wall caused by water jet impact decreases gradually as n increases. When n = 2, the initial damage and failure region on both sides of the wall has virtually vanished; when n = 0.2. The contact surface's center failure depth induced by water jet impact is the deepest. The initial injury is unaffected by changes in jet water pressure.