Chris Griffiths

Dr. Chris Griffiths

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 June 2022 in Coatings
Verified
Journal Article
Open access
PDF file
JWJamie Williams
Jamie Williams
CGChris Griffiths
Chris Griffiths
Tom DunlopTom Dunlop
Tom Dunlop
EJEifion Jewell
Eifion Jewell
Hydrophobicity on steel-based metallic surfaces provides an advantage in limiting corrosion and debris buildup on the surface, thereby, improving the substrate performance. An experimental investigation was conducted on the development of zinc stearate and silicon dioxide coatings on the surface of hot-dipped galvanised zinc-coated steel substrates, which could be used to induce superhydrophobicity. Under optimal formulation and processing conditions, a contact angle of 146° could be produced within a 120-min processing window. This represents a reduction in processing time of 67% over previous literature using similar chemistry. In addition, we proved that costly nano silicon dioxide can be replaced by lower cost micro silicon dioxide without decreasing the performance of the coating contact angle. Under standard accelerated exposure tests, the coating was shown to reduce oxide build up by a factor of 3 compared to uncoated galvanized steel.

25 May 2023 in Coatings
Verified
Journal Article
Open access
PDF file
EWEvan Watkins
Evan Watkins
CGChris Griffiths
Chris Griffiths
CBChris Batchelor
Chris Batchelor
PBPeter Barker
Peter Barker
MCMatthew Carnie
Matthew Carnie
Clearcoats provide long-term aesthetics and protection for underlying coating systems, increasing product lifetimes. However, organic clearcoats are predominantly produced using fossil-fuel feedstocks. In search of a sustainable alternative, an experimental investigation was conducted on the development of glass-like clearcoats produced using the sol-gel process. The processing of sol-gel clearcoats over a pigmented polyurethane coating was studied by modifying the sol-gel solution pH, ageing, curing, precursor chemistry and deposition techniques. Under optimal formulation and processing conditions, defect-free sol-gel clearcoats were produced that have the potential to be scaled up to a coil-coating line using existing technologies. Mechanical testing demonstrated the coatings had excellent adhesion, hardness, and flexibility. Furthermore, accelerated laboratory weathering tests revealed the sol-gel coatings had superior degradation resistance compared to the organic coatings tested, resulting in negligible colour changes and higher gloss retention after 4000 h of exposure. The durability and environmental benefits of sol-gel clearcoats highlight their potential as a replacement for traditional organic clearcoats in a variety of applications.

1 December 2021 in Food Packaging and Shelf Life
Verified
Journal Article
Open access
AAAlaa Alaizoki
Alaa Alaizoki
CPChristopher Phillips
Christopher Phillips
DPDavid Parker
David Parker
CHCraig Hardwick
Craig Hardwick
CGChris Griffiths
Chris Griffiths
DDDavide Deganello
Davide Deganello

24 October 2023 in Energies
Verified
Journal Article
Open access
PDF file
GSGeraint sullivan
Geraint sullivan
CGChris Griffiths
Chris Griffiths
EJEifion Jewell
Eifion Jewell
JSJustin Searle
Justin Searle
JEJonathon Elvins
Jonathon Elvins
Recent research into thermochemical storage (TCS) materials has highlighted their promising potential for seasonal building heating, through energy capture and release during dehydration and hydration cycling. A common TCS material used throughout this investigation was calcium chloride (CaCl2)-impregnated vermiculite-based salt in matrix (SIM). This material was assessed for its robustness during charging and discharging cycles to assess its behavior and in terms of energy stability and chemical stability; the results of which showed consistent volumetric energy density and maximum temperature changes over seven cycles. The calcium SIM did, however, show a decline in leachable Ca content, which was presumed to be a result of stabilization within the vermiculite, and chloride concentration showed little change over the course of the study. Real-time visualization using a high-resolution microscope of calcium SIM particles showed a salt phase change and migration of liquid salt into the valleys of the lamella. A novel cobalt chloride (CoCl2) SIM was used to visualize the hydration path across the particle, through distinct color changes depending on hydration state. The results indicated that the topography of the vermiculite played a significant role in the passive hydration modeling.