Infrared gradient refractive index (GRIN) material lenses have attracted much attention due to their continuously varying refractive index as a function of spatial coordinates in the medium. Herein, a glass accumulation thermal diffusion method was used to fabricate a high refractive index GRIN lens. Six Ge17.2As17.2SexTe(65−x) (x = 10.5–16) glasses with good thermal stability and high refractive index (n@10 μm > 3.1) were selected for thermal diffusion. The refractive index span (∆n) of 0.12 was achieved in this GRIN lens. After thermal diffusion, the lens still had good transmittance (45%) in the range of 8–12 μm. Thermal imaging confirmed that this lens can be molded into the designed shape. The refractive index profile was indirectly characterized by the structure and composition changes. The structure and composition variation became linear with the increase in temperature from 260 °C to 270 °C for 12 h, indicating that the refractive index changed linearly along the axis. The GRIN lens with a high refractive index could find applications in infrared optical systems and infrared lenses for thermal imaging.
Evanescent wave absorption-based mid-infrared chalcogenide fiber sensors have prominent advantages in multicomponent liquid and gas detection. In this work, a new approach of tapered-fiber geometry optimization was proposed, and the evanescent efficiency was also theoretically calculated to evaluate sensing performance. The influence of fiber geometry (waist radius (Rw), taper length (Lt), waist deformation) on the mode distribution, light transmittance (T), evanescent proportion (TO) and evanescent efficiency (τ) is discussed. Remarkably, the calculated results show that the evanescent efficiency can be over 10% via optimizing the waist radius and taper length. Generally, a better sensing performance based on tapered fiber can be achieved if the proportion of the LP11-like mode becomes higher or Rw becomes smaller. Furthermore, the radius of the waist boundary (RL) was introduced to analyze the waist deformation. Mode proportion is almost unchanged as the RL increases, while τ is halved. In addition, the larger the micro taper is, the easier the taper process is. Herein, a longer waist can be obtained, resulting in larger sensing area which increases sensitivity greatly.
Tb-doped magneto-optical (MO) glass is widely used in fiber optics, optical isolators, and modulators. However, only the paramagnetic Tb3+ ions exhibit significant MO effects, whereas the diamagnetism Tb4+ ions suppress the MO effects. Therefore, the valence state control of Tb ions is very critical to optimize MO performance. Here, a reduction strategy was introduced to adjust the Tb valence in glass to achieve the high MO effect. The TiO, which has low valence Ti2+ ions and good reducibility, was used to suppress the oxidation of Tb3+ to Tb4+ ions. In the TiO-B2O3-Al2O3-Na2O glass, 10 mol% TiO can increase the Verdet constant at 650 nm by 19%. With the further increase in Tb2O3 concentration, the Verdet constant reaches a high value of 117 rad/(T·m) at 650 nm, which is close to the Verdet constant of TGG crystal (121 rad/(T·m)). This work provides a new approach to increase the Verdet constant of MO glass.