AISI 5120 steel, which underwent 30 min single-surface nanocrystallization via supersonic fine particle bombarding (SFPB), was pre-boronized at 600 °C for 2 h, and then final-boronized at 800 °C or 900 °C for 2–6 h, i.e., two-step pack-boronizing. The specimens’ microstructure and mechanical characteristics before and after two-step boronizing were examined in detail. The results showed that the hardness of the SFPB surface reached 570 HV, which was 2.73 times higher than its original hardness (209 HV). The nanocrystallized surface exhibited the increased thickness and hardness of the boride layer, in comparison to that of the un-SFPB surface. Two-step pack-boronizing further improved the thickness and hardness of the SFPB surface of AISI 5120 steel. When final-boronizing at 900 °C for 6 h, the thickness and hardness of the boronizing layer in the SFPB surface was 88 µm and 2196 HV, respectively, which was 10.5 times higher than the original hardness. Additionally, the CeO2 added in the boronizing agent was helpful in obtaining the boride layer with the ductile-serrated Fe2B phase rather than the brittle phase of FeB in the boride layer, which was expected for industrial applications.
Object detection based on deep learning is a popular trend, and it includes object recognition and positioning. This paper proposes a method that can accurately obtain object type and accurate three-dimensional position. The method is divided into three parts: object recognition and coarse positioning based on deep learning, precise positioning based on deep learning combined with B-spline level set in color images, and precise three-dimensional positioning with depth information of RGB-D camera. The precise positioning of the object provides accurate end pose information for the autonomous grasping of the robotic arm, and it has great significance to the gripping of the robotic arm. Performance metrics include mAP (mean average precision) and IOU (intersection of a union). Experimental results show that the mAP value of Yolo-v3 in this paper can reach 87.62%, the average IOU of Yolo-v3 in this paper can reach 66.74%, the average IOU of Yolo-v3 and B-spline level set can reach 100%, and can get accurate 3D location in the real scene. In addition, the experiments comparisons between VOC dataset and our own dataset validate that our dataset can take higher mAP and average IOU values.
Purpose: A multi-laser sensors-based measurement instrument is proposed for the measurement of geometry errors of a differential body and quality evaluation. This paper aims to discuss the aforementioned idea.Design/methodology/approach: First, the differential body is set on a rotation platform before measuring. Then one laser sensor called as “primary sensor”, is installed on the intern of the differential body. The spherical surface and four holes on the differential body are sampled by the primary sensor when the rotation platform rotates one revolution. Another sensor called as “secondary sensor”, is installed above to sample the external cylinder surface and the planar surface on the top of the differential body, and the external cylinder surface and the planar surface are high in manufacturing precision, which are used as datum surfaces to compute the errors caused by the motion of the rotation platform. Finally, the sampled points from the primary sensor are compensated to improve the measurement accuracy.Findings: A multi-laser sensors-based measurement instrument is proposed for the measurement of geometry errors of a differential body. Based on the characteristics of the measurement data, a gradient image-based method is proposed to distinguish different objects from laser measurement data. A case study is presented to validate the measurement principle and data processing approach.Research limitations/implications: The study investigates the possibility of correction of sensor data by the measurement results of multiple sensors to improving measurement accuracy. The proposed technique enables the error analysis and compensation by the geometric correlation relationship of various features on the measurand.Originality/value: The proposed error compensation principle by using multiple sensors proved to be useful for the design of new measurement device for special part inspection. The proposed approach to describe the measuring data by image also is proved to be useful to simplify the measurement data processing.