AISI 5120 steel, which underwent 30 min single-surface nanocrystallization via supersonic fine particle bombarding (SFPB), was pre-boronized at 600 °C for 2 h, and then final-boronized at 800 °C or 900 °C for 2–6 h, i.e., two-step pack-boronizing. The specimens’ microstructure and mechanical characteristics before and after two-step boronizing were examined in detail. The results showed that the hardness of the SFPB surface reached 570 HV, which was 2.73 times higher than its original hardness (209 HV). The nanocrystallized surface exhibited the increased thickness and hardness of the boride layer, in comparison to that of the un-SFPB surface. Two-step pack-boronizing further improved the thickness and hardness of the SFPB surface of AISI 5120 steel. When final-boronizing at 900 °C for 6 h, the thickness and hardness of the boronizing layer in the SFPB surface was 88 µm and 2196 HV, respectively, which was 10.5 times higher than the original hardness. Additionally, the CeO2 added in the boronizing agent was helpful in obtaining the boride layer with the ductile-serrated Fe2B phase rather than the brittle phase of FeB in the boride layer, which was expected for industrial applications.
In this paper, an improved segmentation algorithm for the piecewise smooth Mumford-Shah model is proposed. In which a new strategy for the computation of the diffusion item in the model is introduced that induces edge-preserving regularization thus also facilitate the image segmentation. Different from the previous approaches, at each iteration, the smoothing item in proposed algorithm is computed along an approximate contour that is obtained based on the difference between the two unknown functions u and u" that have been extended to the whole image domain. And a narrowband of the approximate contour also is given to reduce the area of the region to be smoothed. As a result, good edge preserving properties have been achieved. The improved approach not only addresses some drawbacks of the original algorithm such as the effect of the local characteristics of images on the curve evolving path and initial curve's effect on the segmentation results, but save computational cost greatly. The resulting algorithm has been implemented with Visual C++6.0, and several experimental results have been provided and compared with the original method. The result demonstrated the effectiveness of the proposed algorithm.