This paper proposes a solution to the problem of improving the reliability of the operation of progressive cavity pump units in deviated and directional wells. High dogleg severity significantly contributes to rod breakage; rods often break close to the “elbows” with a dogleg severity of 2 deg/10 m or higher. Statistical analyses were used to identify the frequency of failures and their impact on the reliability of a PCP unit. The design layout and mathematical model for pump rods’ torsional vibrations in the curved section of a wellbore were developed. A simulation of the curved section was performed. This article provides the basic formulas needed to design a rotating rod string using two reduced discs. The creation of an additional crooked section resulted in multiple reductions in the “resonant” rotational speed and rigidity in the mathematical model. Determining the moment of inertia of the reduced discs’ mass made it possible to determine the sucker-rod string’s stiffness, the circular rotation frequency, and the number of sucker-rod revolutions under resonance. The number of reduced discs on the sucker-rod string depends on the curvature pattern. In summary, a centralizer for a rotating string was designed to reduce the vibration and shock effects of rods on the tubing.
This paper highlights field studies to determine the nature of variations in the load on the sucker-rod string during short-term gas extraction from the wellbore annulus. The results of step-by-step gas extraction from the annular spaces of the wells of fields developed by PJSC TATNEFT are provided. In the course of investigations, we have obtained both the trends of maximum and minimum loads on the polished rod during annular gas extraction, and the dependence of maximum load increment on the rod string with respect to pump size and pressure variation in the annular space. The analysis of the research data resulted in the elaboration of guidelines for short-term extraction of annular gas from wells operated by the PCP units.
This paper presents a set of activities to reduce water cut and develop a technical solution to measure water cut: measurement of watercut, flow rates and gas-oil ratio of a well output using a mobile unit. tracer tests and conformance control operations - watercut of reacting wells within Bashkirian stage decreased by 16,6% after those operations were performed. water flow control, flow deviation and remedying production casing damages made it possible to reduce extraction of produced water and, accordingly, the cost of oil production. development of Liquid Phase Separation Device enabled alternate delivery of oil and water to the intake of downhole pump.
26 December 2024 in Bulletin of the Tomsk Polytechnic University Geo Assets Engineering
Relevance. The need to improve the oil recovery factor from carbonate reservoirs by increasing sweep/displacement coefficients, as well as by searching for ways to improve the efficiency of the reservoir pressure maintenance system. Aim. To increase the efficiency of developing carbonate reservoirs using a reservoir pressure maintenance system through an integrated approach to studying the impact of injected fluid on reservoir systems with natural and man-made fracturing. Objects. Bashkir (C2bsh) and Vereisky (C2vr) Middle Carboniferous objects of the Dachnoe structure of the Dachnoe deposit of the Republic of Tatarstan, tectonically confined to the Ulyanovsk structure of the South Tatar arch. Methods. Seismic, acoustic, radioactive, hydrodynamic methods, as well as methods of ground microseismic monitoring to identify the nature of the activation of natural and man-made fracturing during hydraulic fracturing and cyclic injection into injection wells. Results. The authors have carried out an analysis of the hydrodynamic system of carbonate reservoirs of the Vereiskian-Bashkirian deposits; identified filtration channels; assessed the direction of injected fluid movement; carried out the analysis of the impact of the formation pressure maintenance system on producing wells at various injection modes and compensation levels in carbonate reservoirs. When carrying out hydraulic fracturing in the reservoirs under consideration, it was established that the crack propagates to both objects, thereby forming a single hydrodynamic system. The conclusions obtained from the work indicate the effectiveness of the system for maintaining reservoir pressure in these carbonate reservoirs. Clarification of data on the filtration channels of both the working agent and the oil displaced by it, in combination with knowledge of the rates of movement of the injected liquid and its distribution profiles, makes it possible to effectively manage the oil field development.
1 January 2021 in Construction of Oil and Gas Wells on Land and Sea