Toby Rockstroh

Dr. Toby Rockstroh


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 March 2022 in International Journal of Engine Research
Verified
Journal Article
Closed access
JRJohannes Rohwer
Johannes Rohwer
THTaehoon Han
Taehoon Han
ASAshish Shah
Ashish Shah
Toby RockstrohToby Rockstroh
Toby Rockstroh
EGR is a useful means to improve fuel economy in spark-ignited gasoline engines, especially under part-load conditions by means of reducing throttling losses. There is also a significant reduction in NOx emissions due to the reduced peak cylinder temperatures. However, the ability of conventional spark ignition systems to reliably ignite dilute mixtures limits the dilution tolerance due to the onset of combustion instability. In this study, an active pre-chamber system was evaluated at part load condition with various EGR rates using a regular grade full boiling range gasoline. A premixed air-fuel mixture was supplied to the pre-chamber, which assists in scavenging the residual mass fractions to enable reliable ignition of EGR dilute mixtures in the main combustion chamber. A range of pre-chamber injection, air-fuel mixture formulation, and ignition timing strategies were evaluated during the EGR sweeps. In addition, 0-D and 1-D simulations were conducted in GT-Power to assess the thermodynamic state and composition in the pre-chamber, as well as estimate the jet momentum at the various dilution rates. The active pre-chamber extended the EGR dilution limit from 20% for conventional SI to above 30%, with a higher pre-chamber flow rate (more scavenging) resulting in increased combustion stability. A tradeoff between the jet momentum and spark timing was observed when analyzing the GT-Power simulations and the pre-chamber jet momentum was found to decrease with increasing EGR rate. At unstable high EGR operation, no relation could be found between the pre-chamber indicated data and main chamber combustion stability.

9 January 2024 in Applied Energy
Verified
Journal Article
Closed access
Marcos Lopez-JuarezMarcos Lopez-Juarez
Marcos Lopez-Juarez
Toby RockstrohToby Rockstroh
Toby Rockstroh
RNR. Novella
R. Novella
RVRam Vijayagopal
Ram Vijayagopal

5 April 2016 in SAE International Journal of Fuels and Lubricants
Verified
Journal Article
Closed access
PDF file
Toby RockstrohToby Rockstroh
Toby Rockstroh
GFGareth Floweday
Gareth Floweday
CWCeleste Wilken
Celeste Wilken
The benefits of blending ethanol into gasoline fuel are well established. Ethanol’s high latent heat of vaporisation and chemical auto-ignition resistance combine in producing significant knock resistance, enabling higher compression ratio and/or higher charge boosting. Its high flame speed characteristics result in shorter burn durations. Its high knock resistance and rapid burning enable ignition phasing optimisation. These factors all improve the efficiency of spark ignition (SI) engines.Current “flex-fuel” vehicles are designed to operate on both conventional gasoline as well as blends containing higher volumes of ethanol and/or methanol, the former being commonly known as E85. The American Society for Testing and Materials ASTM D5798 specification for ethanol fuel blends was adapted in 2011 to prescribe a minimum ethanol content of 51 % with the remainder able to consist of low octane blending streams. This opens the door for fuel manufacturers to include naphtha streams previously not regarded as suitable for spark ignition engines. In this study Low Temperature Fischer-Tropsch (LTFT) Gas to Liquids (GTL) naphtha, a low octane product of a LTFT GTL refinery, was investigated for suitability of use in oxygenated gasoline fuel blends.Fuel blends consisting of a mid-grade gasoline, GTL naphtha and ethanol were analysed to compare their octane ratings in relation to gasoline specifications.The performance of GTL naphtha and ethanol blends (E50 and E85) was compared to petroleum-derived gasoline as well as a High Temperature Fischer-Tropsch (HTFT) Coal to Liquid (CTL) derived synthetic commercial 95 RON gasoline by means of spark advance sweeps conducted on a charge boosted single cylinder Gasoline Direct Injection (GDI) research engine. While the E85 blend exhibited completely knock free operation, it was shown that the E50 blend resulted in similar performance to the commercial gasoline as a consequence of comparable partially knock limited spark advance (KLSA) behaviour.The study derived blending rules for the simultaneous use of GTL naphtha and ethanol in order to maintain the octane quality of the base gasoline.

19 April 2021 in Journal of Energy Resources Technology
Verified
Journal Article
Open access
PDF file
SKSayop Kim
Sayop Kim
RSRiccardo Scarcelli
Riccardo Scarcelli
YWYunchao Wu
Yunchao Wu
JRJohannes Rohwer
Johannes Rohwer
ASAshish Shah
Ashish Shah
TLTianfeng Lu
Tianfeng Lu
Lean and dilute gasoline compression ignition (GCI) operation in spark ignition (SI) engines are an attractive strategy to attain high fuel efficiency and low NOx levels. However, this combustion mode is often limited to low-load engine conditions due to the challenges associated with autoignition controllability. In order to overcome this constrain, multi-mode (MM) operating strategies, consisting of advanced compression ignition (ACI) at low load and conventional SI at high load, have been proposed. In this three-dimensional computational fluid dynamics study, the concept of multi-mode combustion using two RON98 gasoline fuel blends (Co-Optima Alkylate and E30) in a gasoline direct injection (GDI) engine were explored. To this end, a new reduced mechanism for simulating the kinetics of E30 fuel blend is introduced in this study. To cover the varying engine load demands for multi-mode engines, primary combustion dynamics observed in ACI and SI combustion modes was characterized and validated against experimental measurements. In order to implement part-load conditions, a strategy of mode transition between SI and ACI combustion (i.e., mixed-mode combustion) was then explored numerically by creating a virtual test condition. The results obtained from the mixed-mode simulations highlight an important feature that deflagrative flame propagation regime coexists with ignition-assisted end-gas autoignition. This study also identifies a role of turbulent flow property adjacent to premixed flame front in characterizing the mixed-mode combustion. The employed hybrid combustion model was verified to perform simulations aiming at suitable range of multi-mode engine operations.

28 July 2023 in Control Engineering Practice
Verified
Journal Article
Closed access
QPQian Peng
Qian Peng
Toby RockstrohToby Rockstroh
Toby Rockstroh
MPMichael Pamminger
Michael Pamminger
CHCarrie Hall
Carrie Hall

16 July 2021
Verified
Preprint
Open access
SKSayop Kim
Sayop Kim
RSRiccardo Scarcelli
Riccardo Scarcelli
JRJohannes Rohwer
Johannes Rohwer
ASAshish Shah
Ashish Shah
Toby RockstrohToby Rockstroh
Toby Rockstroh
TLTianfeng Lu
Tianfeng Lu
For gasoline fueled engines, diluted and low-temperature homogeneous charge compression ignition (HCCI) techniques have opened an affordable solution to maintain their attractiveness in low NOx levels and rising demand of fuel efficiency. However, this approach is limited to a certain range of low-load engine conditions due to combustion instability and lack of autoignition