Dongrui Wang

Dr. Dongrui Wang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2022 in Processes
Verified
Journal Article
Open access
PDF file
JZJianyi Zhang
Jianyi Zhang
DWDongrui Wang
Dongrui Wang
WWWeiwei Wang
Weiwei Wang
ZZZuchao Zhu
Zuchao Zhu
The bend pipe with a circular section, which is widely used in hydropower, chemical industry and other fields, is a common form in pipeline systems. However, secondary flow occurs when the fluid flows through the bend pipe, thereby affecting the stability of the pipeline system. Different bending angles have various effects. Therefore, this paper establishes 3D models of a circular bend pipe with different bending angles. The influence of bending angle on flow field distribution and downstream flow is analyzed numerically. The larger the bending angle is, the more obvious the flow distribution and even the unevenness at the elbow will be, hence resulting in poor stability. The distance required to restore flow uniformity also increases. The pressure energy loss of the bend pipe with different bending angles is investigated. Results show that with the increase in bending angle, the global pressure loss presents a trend of “increase-decrease-increase.” The closer the bending angle is to 90°, the greater the influence of centrifugal force is on the flow, and the more obvious the secondary flow phenomenon will be. Aiming at the nonuniformity phenomenon, the structure optimization of a 90° bend pipe with the greatest influence is conducted. The improvement of the flow characteristics of bend pipe with different thick-diameter ratio and length-diameter ratio is compared. The deflector with a certain thickness can enhance the uniformity, safety and useful life of the bend pipe. The sharp-end length can improve the velocity uniformity to a certain extent but has minimal influence on flow characteristics compared with the thick-diameter ratio. This paper aims to study and improve the flow performance of a multi-structure bend pipe to make it suitable for more complex conditions.

6 May 2022 in Journal of Fluids Engineering
Verified
Journal Article
Closed access
PDF file
ZLZhe Lin
Zhe Lin
DWDongrui Wang
Dongrui Wang
JTJunyu Tao
Junyu Tao
ZZZuchao Zhu
Zuchao Zhu
XGXiaomei Guo
Xiaomei Guo
V-port ball valves have been widely utilized as a control device in various fluid transmission systems, achieving the function of throttling and controlling the flow direction effectively. However, the flow characteristics for a V-port ball valve in the opening and closing processes are unclear, especially the influence of different cone angles on the valve regulation process. The present work investigates the transient regulation performance and internal flow characteristics with different cone angles of a V-port ball valve in its opening and closing processes experimentally and numerically. The results reveal that the performance parameters involving the flow rate, pressure, and flow coefficient in the opening process are greater than those in the closing process; subsequently, they become the same after stabilization. The V-port cone angle affects the flow rate, pressure, and flow coefficient significantly. The maximum flow rate and flow coefficient increases with the increase in the cone angle. The inlet pressure and the initial opening in which the outlet pressure begins to reduce decrease with an increase in the cone angle. In the valve regulation process, the interaction between the flow and the cone leading edge produces a large flow variation. As the cone angle increases, the variation degree at the leading edge weakens. The current conclusions can provide a reference for the design and optimization of V-port ball valves.


1 February 2025 in Physics of Fluids
Verified
Journal Article
Closed access
ZZZehui Zhu
Zehui Zhu
QGQi Gu
Qi Gu
DWDongrui Wang
Dongrui Wang
HCHongxun Chen
Hongxun Chen
ZMZheng Ma
Zheng Ma
When reversible pump turbines go through the S-shape region, there is some significant backflow regions in the vaneless space, accompanied by severe pressure fluctuation. However, the internal correlation and mutual influence mechanism among pressure fluctuation, turbulent vortex structure, and backflow are still unclear enough in current research. In this work, the backflow characteristics and formation mechanism of pump turbine in the S-shape region are figured out by using computational fluid dynamics methods. The results indicate that the Leading-Edge-Passage-Vortex caused by adverse pressure gradient is dominant in the initial stage of the backflow. In this stage, the interaction between the inflow fluid and the backflow fluid is the main reason causing the high amplitude and wideband pressure fluctuation components in the vaneless space. In the stage of backflow development, the adverse pressure gradient and centrifugal force play dominant roles in different backflow regions, respectively. The rotating stall phenomenon appears in the runner and a significant low-frequency component 0.6fn and 0.3fn∼0.45fn appeared, respectively, in the vaneless space and runner. In the fully developed stage, the backflow is dominated by the centrifugal force of the runner. The backflow region is concentrated in the main flow area of the runner inlet, while the inflow region is pushed out to the upper crown and lower ring. These findings can provide the theoretical supports for improving the stability of pump turbine operating in off-design condition.

12 June 2026 in Computer Methods and Programs in Biomedicine
Verified
Journal Article
Closed access
DWDongrui Wang
Dongrui Wang
HCHongxun Chen
Hongxun Chen
ZMZheng Ma
Zheng Ma