Formaldehyde, as a harmful gas produced by materials used for decorative purposes, has a serious impact on human health, and is also the focus and difficulty of indoor environmental polution prevention; hence, designing and developing gas sensors for the selective measurement of formaldehyde at room temperature is an urgent task. Herein, a series of SnS₂/SnO₂ composites with hollow spherical structures were prepared by a facile hydrothermal approach for the purpose of formaldehyde sensing at room temperature. These novel hierarchical structured SnS₂/SnO₂ composites−based gas sensors demonstrate remarkable selectivity towards formaldehyde within the concentration range of sub-ppm (0.1 ppm) to ppm (10 ppm) at room temperature. Notably, the SnS₂/SnO₂−2 sensor exhibits an exceptional formaldehyde-sensing performance, featuring an ultra-high response (1.93, 0.1 ppm and 17.51, 10 ppm), as well as good repeatability, long-term stability, and an outstanding theoretical detection limit. The superior sensing capabilities of the SnS₂/SnO₂ composites can be attributed to multiple factors, including enhanced formaldehyde adsorption, larger specific surface area and porosity of the hollow structure, as well as the synergistic interfacial incorporation of the SnS₂/SnO₂ heterojunction. Overall, the excellent gas sensing performance of SnS₂/SnO₂ hollow spheres has opened up a new way for their detection of trace formaldehyde at room temperature.

A gas chromatography coupled with mass spectrometry (GC/MS) method for the simultaneous determination of chlorpromazine and diazepam in pork samples, which are two of the most often used antipsychotics, has been developed and validated. The samples were prepared and purified by solid-phase extraction (SPE), and then were analyzed by GC/MS. Chromatography was performed using an HP-5 MS 5% phenyl–95% methylpolysiloxane fused silica capillary column (30 m × 0.25 mm; film thickness 0.25 μm). The method had a linear calibration curve over the range 10–500 ng mL⁻¹ (r > 0.99), recovery (>66.5% for chlorpromazine and >77.4% for diazepam), precision (%RSD < 11.5% for chlorpromazine and <9.5% for diazepam). The limit of quantification for both chlorpromazine and diazepam was 2.0 μg kg⁻¹. This method can result in faster analysis, lower solvent consumption and less workload per sample while maintaining or even improving sensitivity.