The studies of metal oxides in environmental remediation of chemical and biological pollutants are gaining colossal importance. Herein, we report the facile synthesis of multifunctional copper oxide nanosheets (CuO NS) using an aqueous extract of Rhazya stricta. The phytochemical investigation of R. stricta indicated the presence of saponins, tannins, and reducing sugars, responsible for the reduction and stabilization of CuO NS. A UV–Visible spectrophotometer initially confirmed the fabrication of CuO NS with specific Surface Plasmon Resonance at 294 nm. Field Emission Scanning Electron Microscopy (FE-SEM), Fourier-transform infrared spectroscopy FTIR, and XRD were further used to characterize the CuO NS. The obtained CuO NS were poly-dispersed with an average size of 20 nm. Interestingly these particles were aligned together in 3D cubical sheets layered above each other via self-assembly. The as-synthesized CuO NS showed enhanced antibacterial potential (17.63 mm, overall mean inhibition zone) in comparison to the known antibiotics (11.51 mm, overall mean inhibition zone) against both Solanaceous crop's wilt-causing bacteria (Ralstonia solanacearum and Clavibacter michiganensis). Furthermore, the appreciable photocatalytic potential of CuO NS has also been observed, causing 83% degradation of methylene blue (MB) upon solar irradiation. The synthesis methodology is devoid of any toxic waste or by-products. It could be used to produce eco-friendly CuO nanomaterial for industrial uses.

The marble industry is growing in Pakistan, and Khyber Pakhtunkhwa province is the largest producer of marble tiles in Pakistan. Marble production consumes a considerable amount of water during its life cycle stages and impacts various environmental compartments, such as air, water, and soil; therefore, this study aimed to quantify the environmental impacts, water footprint, and cumulative energy demand of one-tonne marble tile manufactured in a small industrial estate Mardan (SIEM), Pakistan, and provide recommendations to improve its environmental impact profile. The study covers water consumption, energy use, and associated environmental impacts of raw materials and processes through different stages of the marble life-cycle during 2017–2018. The cradle-to-gate (extraction to factory gate or store house) life cycle assessment approach was followed in this study. The functional unit for the current study was one tonne of finished marble tile produced. Primary data from the field surveys and secondary data were modeled using the water scarcity index (WSI), CML 2000 v.2.05 methodology, and the cumulative energy demand indicator present by default in SimaPro v.8.3 software. The total water footprint required for one tonne of finished marble tile was 3.62 cubic meters per tonne (m³/t), with electricity consumed at processing units contributing to environmental burdens the most. Similarly, electricity consumed (at processing units and during polishing) and transportation of finished marble tile to the local market were responsible for global warming potential (388 kg CO₂ eq/tonne tile), human toxicity (84.34 kg 1,4-DB-eq/tonne), freshwater aquatic ecotoxicity (94.97kg 1,4-DB eq/tonne) and abiotic depletion (7.1 × 10⁻⁵ kg Sb eq/tonne). The results of our study follow other marble tile LCA studies conducted globally (such as in Turkey and Italy), which also reported a high contribution to GWP, AP, EP, and HT due to electricity and fossil fuels consumption. The total cumulative energy demand (CED) was calculated as 5863.40 MJ (Mega Joule), with most energy usage associated with non-renewable fossil fuel sources. The results indicated that reducing electricity (using standard automatic machinery) and waste materials, especially paper and plastic wastes, can reduce environmental impacts. Most of the surveyed industrial units did not have wastewater treatment and recycling plants, and wastewater directly flows to nearby freshwater bodies and terrestrial ecosystems. These wastewaters should be adequately treated before being discharged into freshwater aquatic bodies. Environmental impacts must be improved by using the latest automatic machinery, reducing waste materials generation, reducing the distance between processing units and the market, and installing wastewater recycling plants.

A field experiment was conducted during the Rabi season 2017–2018 (October–March) at the University of Agriculture, Peshawar research farm to examine the influence of different nitrogen (N) and phosphorus (P) levels on two different oat varieties: Australian and Ukrainian. The treatments included control and three levels of nitrogen and phosphorus at 30, 60, and 90 kg ha⁻¹. The treatments were arranged in randomized complete block design (RCBD) and replicated three times. The findings showed that the oat varieties were significantly different from one another in yield and yield parameters. The Australian variety recorded higher emergence (49 plants m⁻²), days to emergence (15 days), days to flowering (122 days), days to maturity (145 days), plant height (142.7 cm), number of leaves (6.03 leaves plant⁻¹), number of tillers (92.2 tillers m⁻¹), biological yield (8,179.2 kg ha⁻¹), and grain yield (3,725.6 kg ha⁻¹) than the Ukrainian variety. Similarly, different N and P levels, the maximum days to emergence, days to flowering, and days to maturity were recorded in a control plot. The application of 105 kg N + 90 kg P ha⁻¹was statistically similar to the application of 105 kg N + 60 kg P ha⁻¹. Maximum emergence (60 plants m⁻²), number of leaves (7.0 leaves plant⁻¹), plant height (118.6 cm), number of tillers m⁻¹(102.6), biological yield (9,687.5 kg ha⁻¹), and grain yield (4,416.7 kg ha⁻¹) were determined in Australian variety. Based on the findings of this study, the Australian variety performed better in terms of yield and yield components and the application of N and P fertilizers at the rate of 105 kg N + 60 kg P ha⁻¹produced the best results in both oat varieties.

Cranes are the large and attractive Creatures of nature with long necks, legs, and life-span. Adults of both sexes are the same with similar color patterns. Demoiselle cranes spend most of their lifespan on dry grasses. They are also found around the stream, rivers, shallow lakes, natural wetlands, and depressions. To evaluate the current status of habitat use and major threats a study was conducted in tehsil Domel district Bannu. Line transect method and water quality tests (temperature, PH, contamination of E-coli bacteria) were used. To determine the major threats questionnaire method was used. The whole data was analyzed by using SPSS 21 version. Based on the distribution four study sites were selected and four water samples from each study site were taken. Most sites were moderate to highly degraded except Kashoo and kurram river mixing point which was low degraded with livestock grazing and human activities. Water quality tests showed PH ranges from 7-9, temperature 6.5-8.5, and contamination of E-coli in all samples. The social survey revealed that hunting, habitat degradation, and pollution as major threats. Effective long-term conservation and management in the study area are needed to focus on the protection of disturbance-free habitat.