In this article, we propose a light weight, low profile Multiple Input Multiple Output (MIMO) antenna system for compact 5th Generation (5G) mmwave devices. Using a RO5880 substrate that is incredibly thin, the suggested antenna is made up of circular rings stacked vertically and horizontally on top of one another. The single element antenna board has dimensions of 12 × 12 × 0.254 mm${}^3$ while the size of the radiating element is 6 × 2 × 0.254 mm${}^3$ (0.56$\lambda$${}_0$ × 0.19$\lambda$${}_0$ × 0.02$\lambda$${}_0$). The proposed antenna showed dual band characteristics. The first resonance showed a bandwidth of 10 GHz with a starting frequency of 23 GHz to an ending frequency point of 33 GHz followed by a second resonance bandwidth of 3.25 GHz ranging from 37.75 to 41 GHz, respectively. The proposed antenna is transformed into a four element Linear array system with size of 48 × 12 × 0.254 mm${}^3$ (4.48$\lambda$${}_0$ × 1.12$\lambda$${}_0$ × 0.02$\lambda$${}_0$). The isolation levels at both resonance bands were noted to be >20 dB which shows high levels of isolation among radiating elements. The MIMO parameters such as Envelope Correlation Co-efficient (ECC), Mean Effective Gain (MEG) and Diversity Gain (DG) were derived and were found to be in satisfactory limits. The proposed MIMO system model is fabricated and through validation and testing of the prototype, the results were found to be in good agreement with simulations.

This study presents a planar dual-band multiple-input multiple-output (MIMO) antenna design for the prospective fifth-generation (5G) frequency bands of 28 and 38 GHz. The antenna element is designed by utilizing a rectangular patch with an offset microstrip feeding technique. A dual-band response is achieved by placing semi-circular slots on each side of the patch element. To tune the frequency response and improve impedance matching, vertical rectangular slits are etched in the rectangular patch and the ground plane, respectively. The results show that the single antenna element offers an impedance bandwidth of 2.52 GHz (26.32–28.84 GHz) and 7.5 GHz (34–41.5 GHz). In addition, a MIMO configuration based on pattern diversity using four antenna elements is designed and fabricated. The designed MIMO configuration achieves an impedance bandwidth of 3 GHz (27–30 GHz) and 5.46 GHz (35.54–41 GHz) at operating bands of 28 and 38 GHz. The peak realized gain for the single element at 28 and 38 GHz is noted to be 7.4 dBi and 7.5 dBi, respectively. Furthermore, the polarization diversity configuration illustrates an isolation of > 15 dB and > 25 dB for the 28 and 38 GHz frequency bands, respectively. Moreover, the MIMO configuration attains appropriate values for the envelope correlation coefficient (ECC) and diversity gain (DG), Total Active Reflection Co-efficient (TARC), Channel Capacity Loss (CCL) and Mean Effective Gain (MEG) for the operating frequency bands. The proposed MIMO system based on results seems to be potential choice for mmwave Ka Band Applications.

In this work, a simple, low-cost, dual wideband sub6GHz Multiple Input Multiple Output (MIMO) antenna system for a smart phone is presented. The antenna system is fabricated using inexpensive and commercially easily available 0.8 mm thick FR4 substrate. The presented system consists of a single main board and two side boards containing eight antennas and feedings. The radiating elements are etched on the side boards to provide space for other electronic components and RF systems and sub systems. The dimensions of the main board and the two side boards are 150 $\times 75\times0.8$ mm ³ and 150 $\times 6\times0.8$ mm ³ , respectively. The radiating elements are etched on the side substrates and the feeding network is designed on the main board. The proposed system resonates at 3.5 GHz and 5 GHz providing −10 dB bandwidth of 250 MHz (ranges from 3.3 GHz to 3.55 GHz) and 1700 MHz (ranges from 4.2 GHz to 6.2 GHz), respectively. The design and the arrangement of the structure enable pattern diversity and ensures at least −15 dB of isolation between any two given radiating elements. Moreover, various different key performance parameters such as envelope correlation coefficient (ECC), mean effective gain (MEG), channel capacity (CC), specific absorption rate (SAR), gain, and efficiency are also presented. It is found that the peak gain of the system is 5.8 dBi, ECC is lower than 0.015, efficiency ranges between 58% to 78%, peak SAR is 1.28 W/Kg, and the maximum CC is 40.2 bps/Hz within the frequency band of interest. In addition, to further demonstrate the usefulness of such structure as a smart mobile terminal, single and dual hand scenarios are also presented. To validate the concept and the computed results, a prototype is fabricated and measured. It is found that the simulated results are in very good agreement with the measured results. Based on the performance and the measured results, we believe that this structure holds a promising future within the next generation smart mobile phones.

This paper introduces a novel two-port ultra-wideband (UWB) multiple-input multiple-output (MIMO) antenna system with enhanced isolation characteristics. The antenna, designed on a thin 0.787 mm RO5880 substrate, achieves a compact form factor of 52 × 26 mm${}^2$ and offers a wide bandwidth of 9.2 GHz (2.3 GHz to 11.5 GHz) while meeting the VSWR 2:1 criterion. Notably, the proposed antenna demonstrates an impressive increase in isolation, up to 16 dB, through the integration of a shared radiator with small rectangular slots, effectively reducing interference and improving overall performance. Furthermore, a comprehensive analysis of additional MIMO performance parameters, including the envelope correlation coefficient (ECC) and diversity gain, confirms their satisfactory limits, validating the potential of the proposed UWB-MIMO antenna for various UWB applications. The time domain analysis of the UWB antenna is also analyzed, and results are found to be within satisfactory limits. Simulation and measurement results further support the practicality and effectiveness of the antenna design, highlighting its compact size, wide bandwidth, and enhanced isolation characteristics, positioning it as a promising solution for advanced UWB microwave imaging systems.

For microwave imaging applications, a design for an ultra-wideband (UWB) fractal antenna is presented. The antenna design is composed of a pentagonal fractal patch radiator fed by a modified co-planar waveguide (CPW) ground plane. It is built on a low-loss Rogers RT/Duroid 5880 dielectric substrate with a dimensions of 24 × 30 × 0.787 mm${}^3$. According to the measurements, the designed antenna offers a fractional bandwidth of 123.56% ranging from 3 GHz to 12.7 GHz. In addition, a maximum gain of 3.6 dBi is achieved at 8.5 GHz. From the results, it is also observed that the proposed antenna structure attains constant radiation characteristics in the operating bandwidth, which is useful for microwave imaging applications. The time domain analysis of the proposed design is also performed, and it is observed that the designed antenna offers a group delay of ≤1.5 ns, which ensures minimum pulse distortion.

In this work, a slotted wideband eight-element multiple-input multiple-output (MIMO) antenna system is presented, which covers the N77 (3.2–4.2 GHz) frequency band. The MIMO antennas are printed on a 0.8-mm-thick FR-4 substrate with dimensions of 150 × 75 mm2. The antennas are placed along the length and width of the printed circuit board (PCB). The arrangement of antenna elements offers pattern and polarization diversity, enhancing the smartphone’s ability to receive signals from various directions. The wideband characteristics in the frequency range of 3.25–4.49 GHz are achieved by utilizing a T-slot and an inverted C-slotted stub together. The radiation and total efficiency are found to be >60% for all the MIMO elements. For enhanced isolation between antenna elements placed along the width of the PCB, a slot is introduced, which ensures an isolation of 14.5 dB. This helps achieve an envelope correlation coefficient (ECC) 9.95 dB, and a maximum channel capacity (CC) of 40 bps/Hz. The performance of the MIMO antenna is also assessed in the presence of a human, and comparable results are observed. In addition, the examination of the specific absorption rate (SAR) confirms that it remains well within the safety margins when in proximity to humans.