This study presents a compact ultra-wideband (UWB) antenna fed by a coplanar waveguide (CPW) with huge bandwidth for the demands of modern wireless communities. To overcome some technical limitations of the employed substrate and UWB antenna design, a slotted patch resonator was used to create and simulate this antenna based on Locked-Key topology. It has been printed on a 1.5 mm-thick FR4 substrate with a dielectric constant of 4.4. A feeder with characteristic impedances of 50 Ω has been employed. A CST electromagnetic simulator has been employed to simulate and analyze the antenna design. It is operated within the UWB spectrum with a bandwidth of 10.354 GHz, spanning 3.581 to 14 GHz. The overall surface area is 27 × 25 mm². The gain and maximum efficiency within UWB are better than 3 dBi and 82%, respectively. The antenna is fabricated, and the simulated results are correlated with the measured ones. Finally, the equivalent circuit models for the antenna and rectifier circuit are simulated and measured.

Using Kappa substrate material, a compact microstrip diplexer is developed in this research with two separate channels based on the coupled junction and two bandpass filters functioning in independent frequency bands. Each filter comprises an input/output feed line and a number of resonators with different impedances. The diplexer’s frequency response was modeled and optimized using the Sonnet EM solver. At 2.84 and 4.08 GHz for TX/RX channels, the insertion loss is better than 1 dB for both channels, while the return loss values are 21.2 and 17 dB for transmit and receive filters, respectively. The microstrip diplexer has miniature dimensions of 24 mm × 18 mm with highly narrow bands and band isolation of more than 35 dB. The simulated scattering parameters are in agreement with the measured ones.

In this paper, two novel dual-band bandpass filters (BPFs) and a compact quad-channel diplexer working at 1.7/3.3 GHz and 1.9/3.6 GHz are proposed. In the proposed diplexer design, triangular loop resonators and rectangular loop resonators are used together to reduce the circuit size and improve diplexer performances. Insertion loss (IL) and return loss (RL) of the proposed diplexer are better than 0.8 dB and 21 dB, respectively, at these four operating frequencies. Output ports isolation parameter is better than 30 dB. With the achieved specifications, the proposed diplexer can be used in L and S band applications.

This paper presents a new approach to simplify the design of class-E power amplifier (PA) using hybrid artificial neural-optimization network modeling. The class-E PA is designed for wireless power transfer (WPT) applications to be used in biomedical or internet of things (IoT) devices. Artificial neural network (ANN) models are combined with optimization algorithms to support the design of the class-E PA. In several amplifier circuits, the closed form equations cannot be extracted. Hence, the complicated numerical calculations are needed to find the circuit elements values and then to design the amplifier. Therefore, for the first time, ANN modeling is proposed in this paper to predict the values of the circuit elements without using the complex equations. In comparison with the other similar models, high accuracy has been obtained for the proposed model with mean absolute errors (MAEs) of 0.0110 and 0.0099, for train and test results. Moreover, root mean square errors (RMSEs) of 0.0163 and 0.0124 have been achieved for train and test results for the proposed model. Moreover, the best and the worst-case related errors of 0.001 and 0.168 have been obtained, respectively, for the both design examples at different frequencies, which shows high accuracy of the proposed ANN design method. Finally, a design of class-E PA is presented using the circuit elements values that, first, extracted by the analyses, and second, predicted by ANN. The calculated drain efficiencies for the designed class-E amplifiers have been obtained equal to 95.5% and 91.2% by using analyses data and predicted data by proposed ANN, respectively. The comparison between the real and predicted values shows a good agreement.

This paper proposes an ultra-compact filtering power divider with a wide harmonic suppression band. In this design, the proposed power divider (PD) in the ideal case has 100% size reduction and an infinite number of harmonics suppression. However, in the real case, the proposed divider has a 92% size reduction and suppresses the 2nd to 45th harmonics. The small-proposed divider is designed at 0.9 GHz. The typical Wilkinson divider has two long quarter-wavelength branches. In the proposed design, new resonant series LC branches are used instead of the divider’s typical branches, leading to performance improvements in the proposed PD. To the best of the authors’ knowledge, the proposed filtering PD has the best size reduction, and harmonics suppression reported thus far. The proposed divider has a filtering response with good insertion loss at the passband, which is desirable for modern communication systems.

There has been a lot of interest in microstrip diplexers lately due to their potential use in numerous wireless and computer communication technologies, including radio broadcasts, mobile phones, broadband wireless, and satellite-based communication systems. It can do this because it has a communication channel that can combine two distinct filters into one. This article presents a narrow-band microstrip diplexer that uses a stepped impedance resonator, a uniform impedance resonator, tiny square patches, and a meander line resonator. The projected diplexer might be made smaller than its initial dimensions by utilizing the winding construction. To model the microstrip diplexer topology for WiMAX and WIFI/WLAN at 1.66 GHz and 2.52 GHz, the Advanced Wave Research (AWR) solver was employed. It exhibited an insertion loss of 3.2 dB and a return loss of 16 dB for the first channel, while the insertion loss and return loss were 2.88 dB and 21 dB, respectively, for the second channel. When both filters were simulated, the band isolation was 31 dB. The projected microstrip diplexer has been fabricated using an FR4 epoxy laminate with dimensions of 32 × 26 mm². The simulated S-parameters phase and group delay closely matched the measurements.