This paper presents a simulation model of an oil-lubrication gerotor pump for internal combustion engines. The model was constructed by using a monodimensional commercial code that accounted for all phenomena that occur during the revolution of the pump shaft. Several geometric considerations and theoretical observations are presented. An experiment was also performed to validate the simulation model. In these experimental tests, particular attention was paid to the behavior of the pressure oscillations during the pump shaft revolutions. The final aim of this activity is to obtain an instrument that allows the in-depth analysis of the functioning of the pump and lubrication circuit. Additionally, this instrument can be coupled with other models (e.g., variable valve actuation (VVA) and variable valve timing (VVT)) to account for different problems experienced by the hydraulic components of engines.
This paper deals with the environmental characterization of a large and densely populated area, with a poor reputation for contamination, considering the contribution of environmental features (air, soil, soil hydraulic and groundwater) and the potential effects on human health. The use of Geographic Information System (GIS) has made possible a georeferenced inventory and, by overlaying environmental information, an operational synthesis of comprehensive environmental conditions. The cumulative effects on environmental features were evaluated, taking into account superposition effects, by means of the Spatial MultiCriteria Decision Analysis (S-MCDA). The application of the S-MCDA for converging the combination of heterogeneous factors, related to soil, land and water, deeply studied by heterogeneous groups of experts, constitutes the novelty of the paper. The results confirmed an overall higher potential of exposure to contaminants in the environment and higher mortality rates in the study area for some tumours, but hospital admissions for tumours were generally similar to the regional trend. Besides, mortality data may be strictly dependent on the poor socioeconomic conditions, quality of therapy and a lack of welfare in the area relative to the rest of Italy. Finally, as regards the possible relationship between presence of contaminants in the environment and health conditions of the population no definite conclusions can be drawn, although the present study encourages the use of the new proposed methods, that increase the possibilities for studying the combined effect of more environmental factors.
Electrification of the field of transport is one of the key elements needed to reach the targets of greenhouse gas emissions reduction and carbon neutrality planned by the European Green Deal. In the railway sector, the hybrid powertrain solution (diesel–electric) is emerging, especially for non-electrified lines. Electric components, especially battery power systems, need an efficient thermal management system that guarantees the batteries will work within specific temperature ranges and a thermal uniformity between the modules. Therefore, a hydronic balancing needs to be realized between the parallel branches that supply the battery modules, which is often realized by introducing pressure losses in the system. In this paper, a thermal management system for battery modules (BTMS) of a hybrid train has been studied experimentally, to analyze the flow rates in each branch and the pressure losses. Since many branches of this system are built inside the battery box of the hybrid train, flow rate measurements have been conducted by means of an ultrasonic clamp-on flow sensor because of its minimal invasiveness and its ability to be quickly installed without modifying the system layout. Experimental data of flow rate and pressure drop have then been used to validate a lumped parameter model of the system, realized in the Simcenter AMESim® environment. This tool has then been used to find the hydronic balancing condition among all the battery modules; two solutions have been proposed, and a comparison in terms of overall power saved due to the reduction in pressure losses has been performed.
The chapter summarizes the research activities and main outcomes of the fluid machinery, energy systems and power generation groups, occurred during the 2013–2023 decade. The focus is on the theoretical, experimental, and numerical analysis of power generation systems either from hydrocarbons or from renewables, and more in general, on fluid machinery devices and components.