Marcin Duda

Marcin Duda


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 January 2023 in Rock Mechanics and Rock Engineering
Verified
Journal Article
Open access
PDF file
MDMarcin Duda
Marcin Duda
ABAudun Bakk
Audun Bakk
RHRune Martin Holt
Rune Martin Holt
JSJørn Fredrik Stenebråten
Jørn Fredrik Stenebråten
Stress and pore pressure changes due to depletion of or injection into a reservoir are key elements in stability analysis of overburden shales. However, the undrained pore pressure response in shales is often neglected but needs to be considered because of their low permeability. Due to the anisotropic nature of shales, the orientation of both rock and stresses should be considered. To account for misalignment of the medium and the stress tensor, we used anisotropic poroelasticity theory to derive an angle-dependent expression for the pore pressure changes in transversely isotropic media under true-triaxial stress conditions. We experimentally estimated poroelastic pore pressure parameters of a shale from the Lista formation at the Valhall field. We combined the experimental results with finite element modelling to estimate the pore pressure development in the Valhall overburden over a period of nearly 40 years. The results indicate non-negligible pore pressure changes several hundred meters above the reservoir, as well as significant differences between pore pressure and effective stress estimates obtained using isotropic and anisotropic pore pressure parameters. We formulate a simple model approximating the undrained pore pressure response in low permeable overburden. Our results suggest that in the proximity of the reservoir the amplitude of the undrained pore pressure changes may be comparable to effective stresses. Combined with the findings of joint analysis of locations of casing deformation and total and effective stresses, the results suggest that pore pressure modelling may become an important element of casing collapse and caprock failure risk analysis and mitigation.

28 March 2023 in Geophysics
Verified
Journal Article
Closed access
HYHong Yan
Hong Yan
ABAudun Bakk
Audun Bakk
MDMarcin Duda
Marcin Duda
RHRune Martin Holt
Rune Martin Holt
SLSerhii Lozovyi
Serhii Lozovyi
Time-lapse (4D) seismic data analysis is widely used to monitor producing hydrocarbon or CO2 storage reservoirs and their surroundings. The influence of potentially significant undrained pore-pressure changes around depleting (or injected) reservoirs appears to be neglected in most previous studies. The 4D seismic response in the overburden depends on the stress changes and strains induced by the reservoir. These alterations may challenge stable infill drilling and well integrity. We have used anisotropic static elastic moduli from laboratory measurements for two different field shales to predict stress changes and strains in the surroundings of a depleting reservoir through geomechanical modeling. These mechanical changes are used to quantify undrained pore-pressure changes using anisotropic poroelastic theory constrained with Skempton parameters. Finally, an empirical rock-physics model quantifies the impact of these poroelastic changes on vertical velocity changes and time strains. This model explicitly quantifies the individual contributions to vertical velocity changes from undrained pore pressure, mean stress, and shear stress above (and below) the depleting reservoir. We find that a stiffer surrounding rock exhibits significantly larger vertical time strains and time shifts in the overburden as compared with softer surrounding rocks because of promoted arching. Undrained overburden pore-pressure changes significantly contribute to overburden velocity changes and time shifts. Ignoring anisotropy in the Skempton parameters can lead to overestimating the overburden undrained pore pressure and time shifts after reservoir depletion. The anisotropy in static stiffnesses significantly impacts the dynamic changes in the vertical direction, and the dynamic changes are particularly pronounced in the vicinity of the reservoir. We find how a tailored rock-physics model can link 4D seismic data and geomechanics to separate stress, strain, and pore-pressure changes — all essential for optimizing drilling and production.

18 December 2023 in Geophysical Prospecting
Verified
Journal Article
Open access
ABAudun Bakk
Audun Bakk
MDMarcin Duda
Marcin Duda
XXXiyang Xie
Xiyang Xie
JSJørn F. Stenebråten
Jørn F. Stenebråten
HYHong Yan
Hong Yan
RHRune M. Holt
Rune M. Holt
The formations above a producing reservoir can exhibit large mechanical changes, creating a risk of significant subsidence and loss of rock integrity. These changes can be monitored by time‐lapse seismic acquisition, which measures the corresponding velocity changes via time‐shifts. Third‐order elastic theory can be used to connect subsurface strains and stress changes to these seismic attribute changes. Existing models assume isotropic strain dependence of the dynamic stiffness in shales. It is important to re‐evaluate this isotropic assumption considering the inherent anisotropy of shales and their abundance in the overburden. Thus, we instead propose a third‐order elastic model with a transversely isotropic strain dependence of the dynamic stiffness. When calibrated, this new model satisfactorily predicted P‐wave velocity changes determined in undrained laboratory experiments conducted on overburden field shales, covering a wide range of propagation directions and stress variations. The shales exhibit anisotropic dynamic strain sensitivity, resulting in a significantly higher strain sensitivity predicted for Thomsen's anisotropy parameters epsilon and delta subjected to a uniaxial strain parallel to the horizontal bedding plane compared to the vertical direction. Geomechanical modelling, considering a depleting disk‐shaped reservoir surrounded by shales, was employed to predict the dynamic stiffness changes of the overburden using the laboratory‐calibrated third‐order elastic model. The overburden time‐shifts increased with offset angle, peaking at about 45°, suggesting a strong influence of shear strains on the time‐shifts. In contrast, a corresponding model with an isotropic third‐order elastic tensor, calibrated to the same data, exhibited a significantly lower sensitivity to the shear strains. These results underscore the importance of considering the anisotropic strain dependence of the dynamic stiffness when studying shales. Interpreting offset‐dependent trends in pre‐stack time‐lapse seismic data, along with geomechanical modelling and an appropriate strain‐dependent rock physics model, can assist in quantifying subsurface strains and stress changes.

8 November 2024 in Geophysical Journal International
Verified
Journal Article
Open access
PDF file
SLS Lozovyi
S Lozovyi
MDMarcin Duda
Marcin Duda
ABA Bauer
A Bauer
RHR M Holt
R M Holt
Changes in pore pressure within geological reservoirs, due to, for example hydrocarbon production, CO2 and energy storage or wastewater disposal, may cause substantial stress changes in the overburden, altering propagation velocities of elastic waves. The corresponding time-shifts are detected and quantified using time-lapse (4-D) seismic analysis. To invert seismic time-shifts for changes in stress and strains, stress sensitivity of rocks is studied in laboratory experiments on core plugs. Such measurements are typically conducted at ultrasonic frequencies. However, previous studies indicate that the stress sensitivity of velocities at seismic frequencies could be higher than that at ultrasonic frequencies. Therefore, calibration based on laboratory ultrasonic data may lead to inaccurate prediction of stresses and strains when applied to 4-D seismic data. To study the influence of frequency on stress sensitivity of acoustic wave velocities, a series of laboratory experiments was performed on two overburden shales with different petrophysical properties. In a low-frequency apparatus—a triaxial pressure cell that combines measurements at low (seismic) and high (ultrasonic) frequencies—the shale samples underwent stress changes with different ratios of horizontal to vertical stress amplitudes to mimic stress variations across the overburden. High-frequency velocity changes were directly recorded, while low-frequency velocity changes were obtained indirectly from the elastic parameters measured at seismic frequency by applying a rock physics inversion using third-order elasticity model. The experiments were conducted at undrained conditions, a representative state for reservoir overburden composed of shales. The results suggest that the stress sensitivities and strain sensitivities (R-factor) of P-wave velocities could be two to four times greater at seismic frequencies than at ultrasonic frequencies. Furthermore, it was found that the previously reported linear relation between the stress sensitivity and stress-path parameter (horizontal/vertical stress change) at ultrasonic frequencies also holds for seismic frequencies. We discuss the theoretical background for frequency-dependent stress sensitivity of wave velocities that supports the experimental findings. The effect of frequency when using laboratory-based calibrations should be taken into account when inverting time-lapse seismic data for changes in stresses and strains.

13 September 2022 in Physical Sciences Forum
Verified
Conference Paper
Open access
PDF file
PCPierre Cerasi
Pierre Cerasi
MDMarcin Duda
Marcin Duda
LELaura Edvardsen
Laura Edvardsen
NANicolaine Agofack
Nicolaine Agofack
MBMohammad Bhuiyan
Mohammad Bhuiyan
Laboratory tests were performed on the Draupne shale formation, which may serve as a seal over CO2 storage sites. Different techniques were used to assess the integrity and mechanical properties of the shale, with the main objective of investigating whether exposure to CO2 would in any manner alter these properties. The laboratory methods used encompass traditional triaxial tests; however, with fluid substitution prior to increasing axial stress to failure. These tests were conducted on smaller cylindrical plugs than standard, taking advantage of the finer grained nature of the shale. Another set of experiments used the low-frequency technique, whereby small amplitude, cyclic axial strains are applied on the specimen, allowing a direct measurement of stiffness. Long exposure, with change of fluid from brine to CO2, allowed for quantifying small changes in stiffness, thanks to the many repeated cycles of non-destructive testing. In a final experimental technique, the punch test, shear strength of the same material was obtained by cutting a central disk from a larger intact shale disk, while measuring the shear force needed to perform the cut.

10 June 2026
Verified
Conference Paper
Open access
MDMarcin Duda
Marcin Duda
SDSzymon Długosz
Szymon Długosz
ZWZbigniew Wilczyński
Zbigniew Wilczyński
ELElisa Ligas
Elisa Ligas
GPGiovanni Pantaleo
Giovanni Pantaleo
BMBenedikt Mithassel
Benedikt Mithassel
Time-lapse monitoring is one of the main requirements for Carbon Capture and Storage sites. Seismic monitoring, the most used geophysical method for such purpose, is central to tracking subsurface changes during CO2 injection. However, as CCS deployment scales up, monitoring technologies must balance data quality, operational practicality, repeatability, and long-term cost-effectiveness. Distributed Acoustic Sensing (DAS) offers a viable alternative to conventional sensors for permanent installation and monitoring of large-scale CCS sites. However, as DAS is still considered an emergingtechnology, its performance must be evaluated against established instruments under controlled field conditions. DAS provides many advantages, including requirement for electrical power only at one fibre end, dense spatial sampling, and the ability to record many channels over large coverage from a single interrogator. At the same time, DAS measurements can be affected by higher noise levels, directional sensitivity, gauge-length and pulse-width effects, and variable coupling between the fiber and the surrounding medium. Here, we present a comparative study of surface and borehole fiber-optic seismic sensing during a CO₂ injection experiment at the Svelvik CO₂ Field Lab in May 2026. Injection was conducted in a central 65 m deep borehole, surrounded by four 100 m deep monitoring boreholes located 9–16 m from the injection well and instrumented with cemented fiber-optic cables. During the survey, a P-wave sparker source was deployed in the monitoring boreholes and on a surface in a prototype seismic source. The DAS system included straight and helically wound borehole fibers cemented outside of the monitoring wells, together with a prototype fiber optic surface sensor coupled to the ground with adjustable fluid mass loading. The entire fiber layout was interrogated simultaneously with an ASN OptoDAS interrogator. The DAS data are compared with measurements from borehole hydrophone strings, surface geophones, standalone seismic nodes, and a prototype of a optical MEMS-based accelerometer, allowing direct comparison of multiple sensors under identical field conditions. We evaluate signal-to-noise ratio, repeatability metrics, stacking performance, quantitative signal attributes, and time-lapse response. The study provides a field-based assessment of how DAS-based seismic data can complement conventional and novel point seismic sensors for high-resolution monitoring of CO₂ injection and other shallow subsurface processes.