A new method called simplified and highly stable thermal lattice Boltzmann method, which is based on the lattice Boltzmann framework, was used to simulate the hybrid nanofluid natural convection and heat transfer in a square enclosure with a heating obstacle at high Rayleigh numbers. Four fins protrude from the heating obstacle to affect the flow pattern and heat transfer performance. The effects of the Rayleigh number (106 ≤ Ra ≤ 109), nanoparticle volume fraction (0 ≤ ϕ ≤ 0.05), and length of the fin (0.1 ≤ h ≤ 0.3) on the flow pattern, temperature distribution, and heat transfer characteristics were illustrated and analyzed. To validate the present method, the benchmark simulation results were performed. Three kinds of flow patterns (steady symmetry, unsteady symmetry, and unsteady asymmetry) can be identified at various Rayleigh numbers. At different lengths of fins, the critical Rayleigh number of flow pattern transition (from steady symmetry to steady asymmetry and from steady asymmetry to unsteady asymmetry) is different. ϕ and h also significantly affect the flow pattern. At higher ϕ, the flow inside the enclosure is steadier and the effect of h on the flow pattern varies at different Ra.
Lithium-ion batteries are a crucial part of transportation electrification. Various battery thermal management systems (BTMS) are employed in electric vehicles for safe and optimum battery operation. With the advancement in power demand and battery technology, there is an increasing interest in enhancing BTMS’ performance. Liquid cooling is gaining a lot of attention recently due to its higher heat capacity compared to air. In this study, an air-cooled BTMS is replaced by a liquid cooled with nanoparticles, and the impacts of different nanoparticles and flow chrematistics are modeled. Furthermore, a unique approach that involves transient analysis is employed. The effects of nanofluid in enhancing the thermal performance of lithium-ion batteries are assessed for two types of nanoparticles (CuO and Al2O3) at four different volume concentrations (0.5%, 2%, 3%, and 5%) and three fluid velocities (0.05, 0.075, and 0.1 m/s). To simulate fluid flow behavior and analyze the temperature distribution within the battery pack, a conventional k-ε turbulence model is used. The results indicate that the cooling efficiency of the system can be enhanced by introducing a 5% volume concentration of nanofluids at a lower fluid velocity as compared to pure liquid. Al2O3 and CuO reduce the temperature by 7.89% and 4.73% for the 5% volume concentration, respectively. From transient analysis, it is also found that for 600 s of operation at the highest power, the cell temperature is within the safe range for the selected vehicle with nanofluid cooling. The findings from this study are expected to contribute to improving BTMS by quantifying the benefits of using nanofluids for battery cooling under both steady-state and transient conditions.
With the continuous growth of energy demand and the increasing urgency of environmental protection, enhancing energy conversion efficiency and reducing energy consumption have become particularly important. Nanotechnology, especially nanofluids, has shown great potential in improving thermal conductivity and heat transfer performance. This study investigates the enhancement of natural convection heat transfer using multi-walled carbon nanotube-Fe3O4/water hybrid nanofluids in different radiator structures through numerical simulations. The study considers various radiator geometries (circular and snowflake-shaped), nanoparticle volume fractions (0, 0.001, and 0.003), and Rayleigh numbers (Ra = 103–106). The results indicate that the introduction of nanoparticles enhances the average Nusselt number by up to 13% at the highest nanoparticle volume fraction compared to the base fluid. The dense-branch snowflake-shaped radiator (DB case) demonstrates superior heat transfer performance, achieving a 23% higher Nusselt number than the circular design at high Ra number. Furthermore, as the Ra increases, convective heat transfer is significantly enhanced. The study highlights the combined influence of nanofluids and geometric optimization in improving heat transfer and provides quantitative insights for designing efficient thermal management systems.
5 June 2024 in Iranian Journal of Science and Technology, Transactions of Mechanical Engineering
Natural convection of nanofluids holds considerable importance in both scientific research and engineering applications due to their exceptional heat transfer capabilities, which occur spontaneously without the need for additional energy input. In this paper, the natural convection of nanofluid inside a parabolic cavity containing a hot obstacle is studied numerically. The shape of the hot obstacle is selected as either circular or elliptical. Additionally, the effects of the Rayleigh number, nanoparticle volume fraction, and the position of the heat source are investigated. The computational fluid dynamics model was computed using COMSOL Multiphysics. It is observed that the average Nusselt number tends to increase with both the Rayleigh number and the volume fraction of nanoparticles in the fluid. When the heat source moves from the bottom region to the top area, the heat transfer performance of the heat source increases. When Ra ≤ 105, the cases with circular heat sources exhibit better heat transfer performance than those with elliptical heat sources. However, at Ra = 106, the average Nusselt number of the elliptical heat source is higher than that of the circular one.
14 December 2019 in Journal of Thermal Analysis and Calorimetry