Cube Satellite (CubeSat) technology is an attractive emerging alternative to conventional satellites in radio astronomy, earth observation, weather forecasting, space research, and communications. Its size, however, poses a more challenging restriction on the circuitry and components as they are expected to be closely spaced and very power efficient. One of the main components that will require careful design for CubeSats is their antennas, as they are needed to be lightweight, small in size, and compact or deployable for larger antennas. This paper presents a review of antennas suitable for picosatellite applications. An overview of the applications of picosatellites will first be explained, prior to a discussion on their antenna requirements. Material and antenna topologies which have been used will be subsequently discussed prior to the presentation of several deployable configurations. Finally, a perspective and future research work on CubeSat antennas will be discussed in the conclusion.

Ganoderma boninense (G. boninense) infection reduces the productivity of oil palms and causes a serious threat to the palm oil industry. This catastrophic disease ultimately destroys the basal tissues of oil palm, causing the eventual death of the palm. Early detection of G. boninense is vital since there is no effective treatment to stop the continuing spread of the disease. This review describes past and future prospects of integrated research of near-infrared spectroscopy (NIRS), machine learning classification for predictive analytics and signal processing towards an early G. boninense detection system. This effort could reduce the cost of plantation management and avoid production losses. Remarkably, (i) spectroscopy techniques are more reliable than other detection techniques such as serological, molecular, biomarker-based sensor and imaging techniques in reactions with organic tissues, (ii) the NIR spectrum is more precise and sensitive to particular diseases, including G. boninense, compared to visible light and (iii) hand-held NIRS for in situ measurement is used to explore the efficacy of an early detection system in real time using ML classifier algorithms and a predictive analytics model. The non-destructive, environmentally friendly (no chemicals involved), mobile and sensitive leads the NIRS with ML and predictive analytics as a significant platform towards early detection of G. boninense in the future.

This paper presents a low-profile dual-band microstrip patch antenna operated at the 2.45/5.8 GHz ISM bands, targeting wireless body area network (WBAN) applications. The proposed antenna is fabricated on a jean substrate measuring mm². The four corners of the conventional rectangular patch are cut to activate an additional operating frequency and to enhance the radiation pattern. The circular slot is added to the radiating patch to fine-tune the desired frequencies. The measured impedance bandwidth of the proposed antenna at 2.45 GHz and 5.8 GHz bands is 3.68% (2.40 GHz–2.49 GHz) and 3.81% (5.67 GHz–5.89 GHz), respectively. The measured maximum gains are 3.08 dBi at 2.45 GHz and 2.15 dBi at 5.8 GHz. Moreover, the antenna’s performance when placed on flat and rounded body surfaces is also investigated. The proposed antenna achieves stable radiation pattern and low specific absorption rate (SAR) value with low complexity in design. The results indicate that the proposed antenna can be a promising candidate for WBAN applications.

This letter proposes a compact 435 MHz telemetry, tracking, and command (TT&C) CubeSat antenna, which does not require an in-orbit deployment mechanism for proper operation. It uses characteristic modes on spacecraft's body to increase the radiating aperture, resulting in a λ/4 sized antenna (as calculated along diagonal of the cube). The antenna aims to provide reliable communication, operating independently from spacecraft's orientation and does not rely on proper deployment of vulnerable mechanical components. The limited space in the launcher limits any protrusions to no more than 6 mm (1/115th of the wavelength) from the spacecraft's wall, which results in low input impedance of 0.4 - 3.2j. To overcome this issue, a differential feeding structure is proposed that incorporates a power divider with impedance matching circuit. It also incorporates a lumped capacitor that can adjust the antenna's operating frequency. The antenna offers a dipolelike radiation pattern with performances comparable to larger deployable UHF antennas. It is intended for reliable TT&C.

Radio frequency power amplifiers (RF PA) are widely used for several applications e.g. wireless communication, wireless power transmission (WPT) and radio frequency heating. In general, the choice of power amplifier's operating class is based on requirements regarding linearity and power efficiency. For applications in which linearity is not a critical issue whereas high efficiency is desired, switched-mode amplifier e.g. class E is suitable. Switched-mode operation of class E offers high efficiency with a simple topology, leading to optimal costs of production and system operation. This work presents design and implementation of a high power and high efficiency 13.56 MHz class E power amplifier with parallel load circuit. As a power device, LDMOS was chosen. The fabricated class E PA provides Power-Added Efficiency (PAE) of 94.6% with 21.92 power gain when maximum output power of 44.92 dBm (31 W) is delivered to the load. Industrial, Scientific and medical (ISM) bands Class E PA with parallel load circuit.