This letter presents a wideband circularly polarized (CP) magneto-electric (ME) dipole antenna array for millimeter-wave (mmW) applications. According to the design evolution, the proposed antenna element comes from a linearly polarized ME-dipole fed by an H-shaped slot, in which the microstrip patches work as electric dipoles, and the widths of the patches are first tuned to achieve an elliptically polarized wave. Then the L-shaped strips are loaded on the patches to further deflect currents, and two CP ME-dipole modes are generated by electric and magnetic currents in parallel. Next, some perturbations, including the conversion of L-shaped strips to F-shaped strips and the partial truncation of a pair of patches, are adopted to further improve the AR performance. The proposed CP ME-dipole antenna finally achieves an overlapped operating bandwidth of 32%. For verification, a 1-to-64 microstrip feeding network is designed to build a corporate-fed 8×8 array. The measured results indicate that the proposed CP array achieves an overall bandwidth of 31.7% covering 30.2 to 41.6 GHz, a peak gain of 22 dBic, and a radiation efficiency of greater than 64%. With outstanding CP performance and compact size, the proposed CP array is an attractive candidate for mmW and satellite communications.
24 August 2022 in IEEE Antennas and Wireless Propagation Letters
This letter proposes a Ka-band broadband circularly polarized (CP) planar array based on the magneto-electric (ME) dipole structure. The antenna element consists of linearly polarized (LP) ME-dipole and two rotationally symmetrical bent strips. The two strips are connected to the opposite side of the LP ME-dipole to obtain a rotating electric field required by CP radiation. A feed structure of microstrip is implemented to excite the antenna element through an H-shaped coupling slot. The tightly coupled array (TCA) technique is adopted to enhance the axial ratios (AR) of the element. The proposed CP element realizes an AR bandwidth of 28%. Then, an 8 $ \times $ 8 array with a 1-to-64 full-corporate feeding network is designed for experimental validation. The test results indicate that the 8 $ \times $ 8 array prototype exhibits an impedance bandwidth of 50% covering 24 to 40 GHz, a 3 dB AR bandwidth of 28% covering 26.7 to 35.3 GHz, a gain between 20.6 to 22.1 dBic over the whole overlapped bandwidth, and a radiation efficiency higher than 75%. Attributed to the excellent CP performance and ease of integration with front-end circuits, the designed array is a good select for Ka-band wireless and satellite communications.
14 June 2023 in IEEE Transactions on Antennas and Propagation
In this communication, a planar folded dipole antenna array with wide operating bandwidth and compact size is proposed for 5G millimeter-wave (mmWave) applications. The basic antenna element is a pair of parallel folded dipoles (PFDs) connected at the terminals. Compared with a single half-wavelength dipole, the PFD can achieve a flatter impedance curve in the working frequency band, and it is easier to achieve broadband impedance matching with 50Ω feeding line. Moreover, a coupling slot feeding method is adopted to feed the proposed antenna element. The capacitance provided by the coupling slot can counteract the inductance caused by the PFD, thus improving the impedance matching at the low frequency band. Benefiting from the innovative design, the proposed antenna element can achieve an ultra-wide impedance bandwidth of 64% and a compact size of 0.26λ 0 × 0.28λ 0 . Furthermore, a wide scanning angle with ±50° over wide bandwidth is testified by a 1×8 array using active simulation. For verification, a 4×4 full corporate-fed array is designed based on the proposed element. The measured results prove that the proposed 4×4 array has a -10 dB impedance bandwidth of 65% covering 17 to 33.75 GHz and a peak gain of 17.5 dBi. The measured total efficiency is from 69% to 82% over the working frequency band. With the merits of compact size, wide working bandwidth, and wide beam scanning angle, the proposed antenna is a good candidate for mmWave wireless communications.
5 June 2024 in IEEE Transactions on Antennas and Propagation
This paper proposes a broadband absorber that exhibits excellent angular stability. A unit cell is formed by stacking a modified magnetic material layer, an air spacer layer and a grounded magnetic material layer. An equivalent circuit model (ECM) is established for the absorber. Studying the surface impedance and the conditions in which the absorption rate surpasses 90% at various incidence angles. Furthermore, a prototype is fabricated, assembled, and measured to confirm the operation feasibility of the absorber. The experimental results demonstrate a stable absorption band (| S 11 |≤–10dB) between 2.4GHz and 7.3GHz under normal incidence, with a fractional bandwidth (FBW) of 101% and a relative thickness of 0.099λ L . When the incident angle θ reaches 60°, the absorption performances remain same for TE- and TM-polarized oblique incidences. The measured results demonstrate that the absorber attains an absorption rate of over 80% within the ±70° airspace range.
27 September 2024 in IEEE Transactions on Antennas and Propagation
A ultrawideband, high isolation dual-polarized endfire antenna is presented in this article. Based on the high isolation of the substrate integrated waveguide (SIW) and stripline, we innovatively developed an SIW-fed magnetoelectric (ME) dipole as the vertically polarized (VP) endfire antenna and a stripline-fed tapered slot antenna (TSA) as horizontally polarized (HP) endfire antenna. These two antennas realize ultrawide bandwidth and can share a radiation aperture. Meanwhile, the ME dipole acts as a parasitic structure, which greatly improves the impedance matching of the TSA in the working band. Due to this innovative design, the proposed dual-polarized endfire antenna realizes an operating bandwidth of 60% and a port isolation level exceeding 35 dB. To satisfy the requirements of 5G communication systems, we designed a multibeam antenna system composed of seven dual-polarized endfire antennas and a 3-D-printed Luneburg lens. The measured results indicate that the multibeam antenna achieves an overlapped bandwidth of 58% and a maximum gain of about 20.5 dBi. The gain variation within the scanning range of ±66° was less than 1 dB. With the merits of low cross-polarization, wideband, and high isolation, the presented dual-polarized antenna is an ideal candidate for 5G millimeter-wave (mmWave) systems.
6 January 2025 in IEEE Transactions on Antennas and Propagation
This paper presents a wideband dual circularly polarized (CP) Luneburg Lens (LL) multi-beam antenna for 6G or satellite communication applications. The antenna system consists of six ±45° dual linearly polarized (LP) antennas and a 3D printed LL. To simplify the antenna design and avoid the complexity of multi-layer blind vias, a hybrid feeding method combining parallel L-shaped probes and a coupled slot is employed, achieving high port isolation and dual-polarized radiation. The spherical dielectric LL is engineered to function as a dielectric polarization grid, enabling the conversion of LP waves into CP waves, while also focusing electromagnetic energy. By integrating the proposed dual-LP feed antenna with the spherical dielectric LL, a wideband, high-isolation, dual CP multi-beam antenna with extensive coverage was realized. The design was validated through fabrication and measurement of the proposed system. The results demonstrate an overlapped bandwidth of 23% (26.5–33.5 GHz), port-to-port isolation level exceeding 27 dB, and a peak gain of 18.9 dBic, with six beams covering a ±81° scanning range.