Kuikui Fan

Dr. Kuikui Fan

The Key Laboratory of RF Circuits and System of Ministry of Education, Hangzhou Dianzi University, Hangzhou 310018, China
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 June 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Kuikui FanKuikui Fan
Kuikui Fan
Zhang-cheng HaoZhang-cheng Hao
Zhang-cheng Hao
QYQuan Yuan
Quan Yuan
JHJun Hu
Jun Hu
Guoqing LuoGuoqing Luo
Guoqing Luo
Wei HongWei Hong
Wei Hong
A wideband millimeter-wave (MMW) horizontally polarized omnidirectional antenna with a conical beam is proposed in this paper. The proposed antenna is composed of a radiating circular loop, six arc strips, a one-to-six radial waveguide power divider, and a conical reflector. The radiating circular loop consists of six arc dipoles with curved terminals. The wideband six-way radial waveguide power divider is employed to feed the six arc dipoles, and the wideband performance is achieved by combing the TM 010 mode and the TM 020 mode of the circular cavity. Six arc strips are utilized as directors to improve the omnidirectional performance at the higher frequency band. The conical reflector is designed to improve the radiation gain and obtain a conical beam in the vertical plane without affecting the horizontal plane omnidirectional performance. A prototype is fabricated and measured. The simulation and measured results show that the proposed antenna can achieve a −10 dB impedance bandwidth of 22.9% with stable radiation patterns in the band of 39–49.3 GHz. Owing to the attractive wide bandwidth, good omnidirectional performance, and ease of fabrication, the proposed antenna is a good choice for the forthcoming fifth generation MMW wireless communication systems, especially for the indoor ceiling antenna networking applications.

8 June 2023 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
QTqingquan tan
qingquan tan
Kuikui FanKuikui Fan
Kuikui Fan
WYWeiliang Yu
Weiliang Yu
WWWenLei Wang
WenLei Wang
LLLeilei Liu
Leilei Liu
Guoqing LuoGuoqing Luo
Guoqing Luo
This letter presents a wideband circularly polarized (CP) magneto-electric (ME) dipole antenna array for millimeter-wave (mmW) applications. According to the design evolution, the proposed antenna element comes from a linearly polarized ME-dipole fed by an H-shaped slot, in which the microstrip patches work as electric dipoles, and the widths of the patches are first tuned to achieve an elliptically polarized wave. Then the L-shaped strips are loaded on the patches to further deflect currents, and two CP ME-dipole modes are generated by electric and magnetic currents in parallel. Next, some perturbations, including the conversion of L-shaped strips to F-shaped strips and the partial truncation of a pair of patches, are adopted to further improve the AR performance. The proposed CP ME-dipole antenna finally achieves an overlapped operating bandwidth of 32%. For verification, a 1-to-64 microstrip feeding network is designed to build a corporate-fed 8×8 array. The measured results indicate that the proposed CP array achieves an overall bandwidth of 31.7% covering 30.2 to 41.6 GHz, a peak gain of 22 dBic, and a radiation efficiency of greater than 64%. With outstanding CP performance and compact size, the proposed CP array is an attractive candidate for mmW and satellite communications.

19 August 2019 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
JHJun Hu
Jun Hu
Zhang-cheng HaoZhang-cheng Hao
Zhang-cheng Hao
Kuikui FanKuikui Fan
Kuikui Fan
ZGZijun Guo
Zijun Guo
In this communication, a bidirectional same sense circularly polarized (Bi-SSCP) end-fire antenna array with reconfigurable polarization is proposed and implemented. Firstly, a circular polarization (CP) reconfigurable end-fire antenna element is realized by adopting two pairs of switchable electric dipoles, which have a 180-degree phase difference inherently. Along with the fixed magnetic dipole, the end-fire antenna element can work at two CP states, i.e., left-hand circular polarization (LHCP), right-hand circular polarization (RHCP) by switching the states of the two electric dipoles. Then, a Bi-SSCP end-fire antenna array with polarization diversity is developed by using two identical end-fire antenna elements placed back-to-back with a single feeding probe. For verification, prototypes of the designed end-fire antenna element and Bi-SSCP end-fire antenna array are fabricated and measured. The measured results show reasonable agreement with the simulated ones. The measured overlapped bandwidth for 10-dB return loss and 3-dB axial ratio of the Bi-SSCP end-fire antenna array is from 5.7 to 5.9 GHz for the two CP states.

15 June 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Guoqing LuoGuoqing Luo
Guoqing Luo
WYWeiliang Yu
Weiliang Yu
YYYufeng Yu
Yufeng Yu
HJHuayan Jin
Huayan Jin
Kuikui FanKuikui Fan
Kuikui Fan
FZFang Zhu
Fang Zhu
A dual-polarized broad band-absorptive frequency selective rasorber (FSR) is proposed in this paper. The FSR has a lowpass band with low insertion loss and a broad absorption band. It is a two-layer structure formed by a lossy surface cascaded an absorptive transmission/reflection surface (ATRS), in which the ATRS is constructed by one substrate with a resistive square loop on its top side and a double square loop on its bottom side. The working mechanisms of the proposed ATRS and FSR are completely studied by using their equivalent circuit models. The ATRS retains dual stopbands of the double square loop, and suppresses the unwanted transmission pole of the double square loop. Then a broadband absorptive FSR is achieved. A sample of the proposed FSR is fabricated and measured. The measured results show that the proposed FSR has a lowpass band up to 860 MHz (|S21|≥–1 dB) and a broad absorption band with bandwidth of 95.3% from 3.84 GHz to 10.83 GHz (|S11|≤–10 dB and |S21|≤–10 dB).

1 September 2017 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Kuikui FanKuikui Fan
Kuikui Fan
Zhang-cheng HaoZhang-cheng Hao
Zhang-cheng Hao
QYQuan Yuan
Quan Yuan
A low-profile substrate-integrated waveguide cavity-backed E-shaped patch antenna is proposed for the Q-LINKPAN application in this paper. In order to expand the operating bandwidth, a co-planar waveguide (CPW) is used to feed the proposed antenna with a metallized via for generating one more resonant mode. In addition, a substrate-integrated cavity is employed to suppress the surface wave and improve the radiation efficiency. A differential feeding network is used in the design to improve the symmetry of the E-plane radiation pattern and the H-plane cross polarization. A 2 × 2 prototype is designed, fabricated, and measured for a demonstration. The measured results show that the prototype has a 10 dB impedance bandwidth of 34.4%, a gain of around 12.5 dBi with a narrow E-plane radiation beam within 37.5-46 GHz for long distance applications, and a gain of around 8 dBi with a broad E-plane radiation beam within 47-53 GHz for short distance applications. The proposed technique can be used to develop compact planar antenna for meeting both the shortand long-rang communication requirements of the emerging Q-LINKPAN wireless system.

24 August 2022 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
QTqingquan tan
qingquan tan
Kuikui FanKuikui Fan
Kuikui Fan
WYWeiliang Yu
Weiliang Yu
YYYufeng Yu
Yufeng Yu
Guoqing LuoGuoqing Luo
Guoqing Luo
This letter proposes a Ka-band broadband circularly polarized (CP) planar array based on the magneto-electric (ME) dipole structure. The antenna element consists of linearly polarized (LP) ME-dipole and two rotationally symmetrical bent strips. The two strips are connected to the opposite side of the LP ME-dipole to obtain a rotating electric field required by CP radiation. A feed structure of microstrip is implemented to excite the antenna element through an H-shaped coupling slot. The tightly coupled array (TCA) technique is adopted to enhance the axial ratios (AR) of the element. The proposed CP element realizes an AR bandwidth of 28%. Then, an 8 $ \times $ 8 array with a 1-to-64 full-corporate feeding network is designed for experimental validation. The test results indicate that the 8 $ \times $ 8 array prototype exhibits an impedance bandwidth of 50% covering 24 to 40 GHz, a 3 dB AR bandwidth of 28% covering 26.7 to 35.3 GHz, a gain between 20.6 to 22.1 dBic over the whole overlapped bandwidth, and a radiation efficiency higher than 75%. Attributed to the excellent CP performance and ease of integration with front-end circuits, the designed array is a good select for Ka-band wireless and satellite communications.