The characteristics of a concrete mix are purely dependent on the hydration of cement that is carried forward by using the water quality used in the mix. Several researchers have focused on incorporating pozzolanic or nanomaterials to improve the hydration mechanisms and impart high strength to concrete. A new technology has been introduced to improve the properties of concrete by magnetic-field-treated water (MFTW). Due to magnetization, water particles become charged and the molecules inside the water cluster decrease from 13 to 5 or 6, which eventually decreases the hardness of water, thus improving the strength of concrete when compared to the use of normal water (NW). In advanced construction techniques and practices, the application of Magnetic Water (MW) plays an important role in boosting physicochemical properties. This research work focused on evaluating the standards of water quality through physiochemical analysis, such as Electrical Conductivity (EC), Viscosity, pH, and Total Dissolved Solids (TDS) with the MW at different exposure periods (60 min (MW60), 45 min (MW45), 30 min (MW30), 15 min (MW15), and instant exposure (MWI)). Experiments were carried out to evaluate the fresh, hardened, and microstructural behavior of concrete made with magnetic water (MW) using a permanent magnet of PERMAG (N407) under a field intensity of 0.9 Tesla. In addition, optical properties such as X-ray Diffraction (XRD) and Ultraviolet (UV) absorption were considered for the MW60 mix to ensure water magnetization. Characterization methods such as Fourier Transform Infrared Spectroscopy (FT-IR), Thermogravimetric Analysis (TGA), and Scanning Electron Microscopy (SEM) were employed for NWC and MWC to quantify the hydrated products. From the results, it was observed that the magnetic effect on water characteristics showed significant improvement in the concrete properties with the increase in exposure duration. There were increments of 25.6% and 24.1% in workability and compressive strength, respectively, for the MW60 mix compared to normal water concrete (NWC).
11 August 2023 in Waste Disposal & Sustainable Energy
High-strength concrete is designed for a self-weight reduction structure and exhibits higher resistance to compressive loads. This paper proposes a novel technique to enhance concrete’s properties using Magnetic Field Treated Water (MFTW), describing the results of experimental studies to apprehend the fresh, hardened and microstructural behavior of concrete prepared with Magnetic Water (MW) using a permanent magnet with a field intensity of 0.9 Tesla. The novel scheme focuses on utilizing MW as a water-reducing agent instead of SP to improve the workability of fresh concrete with a 0.38 w/c ratio for achieving M40 grade concrete. Results show a 12% improvement in compressive strength and an 8.9% improvement in split tensile strength compared to normal water (NW) with 1% SP. At 30% cement volume reduction, Magnetic Water Concrete (MWC) performs better than Normal Water Concrete (NWC). Microstructure examination shows that a smaller Calcium Hydrate (CH) crystal is formed with MW and its mineral composition is observed through Energy Dispersive X-ray Analysis (EDAX).
The Civil Engineering network continues to produce high-performance materials and environmentally sustainable construction for society. A new technology has been developed to enhance the properties of concrete through water magnetization. The Magnetized treated water (MW) has received increasing attention from the scientific community due to its potential to enhance the hydration process. Due to the effect of magnetic field on normal water (NW) while mixing with concrete, the molecular structure is oriented into a more uniform shape and enhances the hydration process, which directly influences the strength properties of concrete. This research article investigates the effectiveness of MW in enhancing the properties of concrete through a comprehensive study involving fresh property tests, mechanical strength evaluations, and durability assessments. The structural behaviour of reinforced concrete (RC) beams prepared using NW and MW with an M40 grade concrete mix was experimentally investigated to evaluate the influence of MW on flexural performance. The workability of MW mixed concrete improved by up to 42.7% to the NW mix. The compressive strength and split tensile strength of concrete prepared with MW increased by up to 12.29% and 19.8%, respectively, indicating a significant enhancement in mechanical performance. The influence of magnetically treated water (MW) on reinforced concrete beams was found to enhance flexural strength by up to 12.8% compared to the control beams prepared with normal water, demonstrating its effectiveness in improving structural performance. Moreover, the scanning electron microscope (SEM) analysis revealed that concrete prepared with MW exhibited a significantly greater formation of calcium silicate hydrate (C–S–H) gel compared to the mix made with NW. The micrographs showed a denser and more uniform matrix in the MW-based concrete with fewer microcracks and voids, indicating improved hydration and better bonding between cement particles.
28 August 2024 in Multiscale and Multidisciplinary Modeling, Experiments and Design
This study investigates the use of waste plastic (polyethylene and polypropylene) and foundry sand to manufacture eco-friendly paver blocks, providing a sustainable alternative to conventional materials. The project aims to address the challenges of plastic waste disposal and environmental damage caused by sand mining. Twelve paver block samples were prepared with varying proportions of plastic (30%–60%) and foundry sand, with or without coarse aggregate. The mechanical properties, including compressive strength, flexural strength, water absorption, and fire resistance, were tested following ASTM standards. The optimal mix, FPA-2 (40% plastic, 40% foundry sand, 20% coarse aggregate), exhibited a compressive strength of 27 N/mm2 and a flexural strength of 6.7 N/mm2, comparable to traditional paver blocks. Water absorption rates were below 7%, and the blocks met fire resistance criteria. Cost analysis revealed that plastic-based paver blocks are up to 25% cheaper than conventional ones, enhancing their economic feasibility. By repurposing waste materials, this study offers a sustainable solution for reducing natural resource dependency and mitigating environmental harm. The findings highlight the potential for plastic-based paver blocks to promote circular economy practices, maintain performance standards, and provide cost-effective alternatives for the construction industry.