This paper presents the experimental results of self-healing efficiency of two different bacteria namely Bacillus sphaericus and Bacillus subtilis incorporated in with polypropylene fibre reinforced concrete. Concrete was prepared with an optimum amount of polypropylene fibre and cultured bacteria. The artificial cracks were formed in the concrete to perform this investigation. The cracked concrete was observed at constant intervals. The effectiveness of self-healing was evaluated by the mechanical test over the bacterial concrete with fibre (BCF). The results obtained from the mechanical study show that the BCF produced commendable results. The precipitation characteristic analysis was carried out by SEM and XRD diffractogram analysis was performed to confirm the precipitation in BCF. The analysis shows that there is a presence of sufficient self-healing compound in cracked concrete. The effectiveness of the developed BCF concrete in regaining strength shows a substantial increase in strength after self-healing therefore, the effectiveness of self-healing of BCF is admirable.
Industrial silica sand is a by-product obtained from the industries like paint, paper, rubber etc. It has a similar property with river sand and& M sand. This study explores the effect of high content of silica sand as a partial replacement for fine aggregate for concrete making in construction purpose. In this present research four types of silica sand from two different industrial units (coarser silica sand (VC and TC) and finer silica sand (VF and TF)) were used. The physical classification and morphology observation of silica sand through scanning electron microscope (SEM), energy-dispersive X-ray (EDAX), X-ray fluorescence (XRF) is examined. Fresh and hardened concrete properties were performed for the six sand samples, with two grades (M20 and M30) of concrete. No new compositions or phases were identified in silica sand concrete. Both fine and coarse silica sands were finer than river sand and M sand, as evaluated from the physical classification. The workability of silica sand mix at a fresh state improves the concrete performance up to 40%. The mix, which contains 80% coarser silica sand (TC) with 20% river sand, attained the maximum compressive strength of 34.5 Mpa and tensile strength of 3.5 Mpa at 28 days, which was the greatest of all the mixes. The combination of silica sand and river sand or M sand showed the superior impact of the concrete over the discrete concrete. SEM images showed the well-developed hydrated products like calcium silicate hydrate (CSH), calcium hydroxide (CH) and ettringite in all concrete mixes. It was observed from the XRD pattern that all concrete mixes containing silica sand have a high peak of quartz (SiO2), and calcium silicate hydrate (CSH) exhibits the formation of hydration products in the concrete. Similar stretching and bending patterns of silica sand concrete relates the pattern of nominal sand concrete as observed from Fourier-transform infrared spectroscopy (FTIR).
A mixture of hydraulic lime and pozzolanic material can be used as a binder in making concrete and mortar for energy-efficient construction purposes. Generally, lime possesses lower strength and higher setting time. By introducing pozzolans in the lime mortar, their cementitious properties could be increased and could compete with the cement mortars. The use of pozzolan-lime binder in mortar reduces the utilisation of cement, and hence reduces the environmental problem originating from cement production. This study mainly deals with the mechanical and microstructural properties of lime and lime composite mortars made up of hydraulic lime, silica fume and rice husk ash. Three composite mortars were made with the following combination such as hydraulic lime-silica fume (LSF), hydraulic lime-rice husk ash (LRA) and hydraulic lime-silica fume-rice husk ash (LSR). Further, their properties were compared with the pure lime mortar. Preliminary investigations were made on the lime reactivity and pozzolanic reactivity tests. It was understood that silica fumes have a (15%) better reactivity than rice husk ash. The introduction of pozzolans in the lime mortar promotes fresh, hardened and microstructural properties. The 28 days’ compressive strength of lime composite mortars achieved more than 16 Mpa, while the lime mortar attained 4 Mpa. The combined effect of pozzolanic reaction, hydration and carbonation in the lime composite mortars achieved four times the strength of lime mortar at 28 days. A high peak of calcium carbonate was detected in lime mortar as a result of carbonation. The well-developed microstructure of calcium silicate hydrate and calcium hydroxide exhibits the formation of hydration products in the lime composite mortars as observed from a scanning electron microscope (SEM), energy-dispersive X-ray (EDX) and X-ray diffraction (XRD). Similar graphs of Fourier transform infrared spectroscopy (FT-IR) showed the presence of equivalent functional elements in all lime composite mortars.
Panax ginseng C.A. (P. ginseng) Meyer has been in use since ancient times for its therapeutic activities. Although several studies have investigated the roles of phytoconstituents in human and animal health, no comparative studies have been conducted to test the efficacy of P.ginseng leaf, fruit and root. Therefore, this study aimed to identify the antioxidant and anticorrosion activities of ginseng prepared using five different solvents. The methanolic fruit extract showed comparatively good activity in all assays. The total phenolic content (TPC) was higher in fruit (95.21 mg/g), followed by leaf (39.21 mg/g) extracted in methanol solvent compared other solvents. The total flavonoid content (TFC) of fruit methanolic extract was 50.21 mg/g, which was followed by fruit extracted in ethanol (41.33 mg/g). The same phenomenon was observed in all antioxidant studies. Through Ultrahigh Performance Liquid Chromatography (UHPLC), the presence of 23 phenolic components categorized as hydroxycinnamic acids, hydroxybenzoic acids and a few other groups that play a vital role in antioxidation was identified. Phenols such as chlorogenic acid (1002.2 μg/g), gentisic acid (854.21 μg/g) and rutin (165.32 μg/g) were found in higher amounts in fruit whereas leaf showed significant amounts of m-coumaric acid (185.32 μg/g) and p-coumaric acid (125.24 μg/g). The anti-corrosive property of the fruit extract of the ginseng with methanol as a solvent was analyzed for a copper specimen exposed to 1 M HCl medium and found to have 96% corrosion inhibition efficiency at a 1000-ppm concentration. The smooth surface of the specimen exposed to corrosive media shown in a field emission scanning electron microscope (FESEM) image confirms that the specimen was protected from corrosion, and energy-dispersive X-ray spectroscopy (EDX) spectra show that the loss of Cu is reduced in inhibited metal surface. Atomic force microscopy (AFM) images and surface roughness factor also validate the corrosion inhibition characteristic of ginseng plant extract.
20 May 2023 in Construction and Building Materials
The characteristics of a concrete mix are purely dependent on the hydration of cement that is carried forward by using the water quality used in the mix. Several researchers have focused on incorporating pozzolanic or nanomaterials to improve the hydration mechanisms and impart high strength to concrete. A new technology has been introduced to improve the properties of concrete by magnetic-field-treated water (MFTW). Due to magnetization, water particles become charged and the molecules inside the water cluster decrease from 13 to 5 or 6, which eventually decreases the hardness of water, thus improving the strength of concrete when compared to the use of normal water (NW). In advanced construction techniques and practices, the application of Magnetic Water (MW) plays an important role in boosting physicochemical properties. This research work focused on evaluating the standards of water quality through physiochemical analysis, such as Electrical Conductivity (EC), Viscosity, pH, and Total Dissolved Solids (TDS) with the MW at different exposure periods (60 min (MW60), 45 min (MW45), 30 min (MW30), 15 min (MW15), and instant exposure (MWI)). Experiments were carried out to evaluate the fresh, hardened, and microstructural behavior of concrete made with magnetic water (MW) using a permanent magnet of PERMAG (N407) under a field intensity of 0.9 Tesla. In addition, optical properties such as X-ray Diffraction (XRD) and Ultraviolet (UV) absorption were considered for the MW60 mix to ensure water magnetization. Characterization methods such as Fourier Transform Infrared Spectroscopy (FT-IR), Thermogravimetric Analysis (TGA), and Scanning Electron Microscopy (SEM) were employed for NWC and MWC to quantify the hydrated products. From the results, it was observed that the magnetic effect on water characteristics showed significant improvement in the concrete properties with the increase in exposure duration. There were increments of 25.6% and 24.1% in workability and compressive strength, respectively, for the MW60 mix compared to normal water concrete (NWC).
About Me
Professor having more than 25 years experience in acdemic and 15 years in research
Professor having more than 25 years experience in acdemic and 15 years in research