A novel Mach–Zehnder interferometer based on a fiber multimode interference structure combined with a long-period fiber grating (LPG) is proposed. The multimode interference is achieved through the use of a MMF section spliced between two single-mode fibers, with a length adjusted to couple a fraction of light into the cladding modes. A LPG placed after the MMF couples light back into the fiber core, completing the Mach–Zehnder interferometer. This novel configuration was demonstrated as a bending sensor.

The development of economical optical devices with a reduced footprint foreseeing manipulation, sorting and detection of single cells and other micro particles have been encouraged by cellular biology requirements. Nonetheless, researchers are still ambitious for advances in this field. This paper presents Fresnel zone and phase plates fabricated on mode expanded optical fibres for optical trapping. The diffractive structures were fabricated using focused ion beam milling. The zone plates presented in this work have focal distance of ~5 µm, while the focal distance of the phase plates is ~10 µm. The phase plates are implemented in an optical trapping configuration, and 2D manipulation and detection of 8 µm PMMA beads and yeast cells is reported. This enables new applications for optical trapping setups based on diffractive optical elements on optical fibre tips, where feedback systems can be integrated to automatically detect, manipulate and sort cells.

An all fiber Mach-Zehnder interferometer using suspended twin-core fiber is described. Due to the birefringence of the fiber cores, two interferometers are obtained when the fiber is illuminated by a polarized light. Applying curvature or temperature to the sensing head, different sensitivities are observed. In order to discriminate curvature from temperature in the suspended twin-core fiber Mach-Zehnder sensor, the matrix method is used.