Microstructures are playing an important role in manufacturing functional devices, due to their unique properties, such as wettability or flexibility. Recently, various microstructured surfaces have been fabricated to realize functional applications. To achieve the applications, photolithography or printing technology is utilized to produce the microstructures. However, these methods require preparing templates or masks, which are usually complex and expensive. Herein, a facile approach for fabricating microstructured surfaces was studied based on etched template by inkjet printing technology. Precured polydimethylsiloxane substrate was etched by inkjet printing water-soluble polyacrylic acid solution. Then, the polydimethylsiloxane substrate was cured and rinsed, which could be directly used as template for fabricating microstructured surfaces. Surfaces with raised dots, lines, and squares, were facilely obtained using the etched templates by inkjet printing technology. Furthermore, controllable anisotropic wettability was exhibited on the raised line microstructured surface. This work provides a flexible and scalable way to fabricate various microstructured surfaces. It would bring about excellent performance, which could find numerous applications in optoelectronic devices, biological chips, microreactors, wearable products, and related fields.
Water-borne polyurethane/acrylate (WPUA) emulsion was prepared through emulsion polymerization between vinyl terminated waterborne polyurethane (WPU) and methyl methacrylate (MMA) in this research. Thermogravimetric Analysis (TGA), transmission electron microscopy (TEM), contact angle analysis, and particle size distribution analysis were employed to investigate the performance of the prepared emulsion and coatings with various content of MMA content. The results demonstrated that the thermal resistance, water resistance, and hardness of the prepared WPUA coatings were enhanced by the introduction of the MMA monomer. The contact angle (CA) and particle size of WPUA emulsion increased with the increase of MMA content. Meanwhile, the water-borne inkjet printing ink was prepared using WPUA emulsion as binder resin, and the printing test result showed that the prepared inkjet ink has good printability and color rendering, indicating that WPUA emulsion has great application prospects in the field of inkjet printing.