Fuqiang Chu

Dr. Fuqiang Chu


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 July 2022 in Coatings
Verified
Journal Article
Open access
PDF file
XWXin Wang
Xin Wang
JWJimei Wu
Jimei Wu
FCFuqiang Chu
Fuqiang Chu
YFYao Feng
Yao Feng
Water-borne polyurethane/acrylate (WPUA) emulsion was prepared through emulsion polymerization between vinyl terminated waterborne polyurethane (WPU) and methyl methacrylate (MMA) in this research. Thermogravimetric Analysis (TGA), transmission electron microscopy (TEM), contact angle analysis, and particle size distribution analysis were employed to investigate the performance of the prepared emulsion and coatings with various content of MMA content. The results demonstrated that the thermal resistance, water resistance, and hardness of the prepared WPUA coatings were enhanced by the introduction of the MMA monomer. The contact angle (CA) and particle size of WPUA emulsion increased with the increase of MMA content. Meanwhile, the water-borne inkjet printing ink was prepared using WPUA emulsion as binder resin, and the printing test result showed that the prepared inkjet ink has good printability and color rendering, indicating that WPUA emulsion has great application prospects in the field of inkjet printing.

13 December 2024 in Coatings
Verified
Journal Article
Open access
PDF file
FCFuqiang Chu
Fuqiang Chu
HZHaikuo Zhang
Haikuo Zhang
XZXu Zhou
Xu Zhou
YFYuhang Fu
Yuhang Fu
HDHang Dong
Hang Dong
XWXin Wang
Xin Wang
In this work, a coating method was used to prepare a liquid crystal physical gel with a high orientation of liquid crystal molecules, excellent electrical conductivity, and mechanical stability. The liquid crystal matrix used was nematic phase liquid crystal (5CB), the gel factor was polyvinyl alcohol (PVA), and the conductive filler was carbon nanotubes/polyaniline (CNT/PANI). Chemical in situ polymerization was used to create CNT/PANI composites, wherein polyaniline encapsulates the carbon nanotubes to enhance their dispersion. At 4 mm/s, 7.2 N of coating pressure, and 72 s of interval duration, the shear flow-induced orientation was achieved. The consistent and large-area orientation of the liquid crystal molecules was realized and the orientation direction of the liquid crystal molecules was parallel to the coating direction. Additionally, a type of stress sensor assembly based on multiple coating demonstrated a good sensor performance in the 90° bending test and high sensitivity in the 20% tensile test, with a sensor sensitivity of 23.25. Regarding the use of liquid crystal materials in flexible electronic devices, it is quite important.

4 January 2025 in Coatings
Verified
Journal Article
Open access
PDF file
FCFuqiang Chu
Fuqiang Chu
HDHang Dong
Hang Dong
JCJilei Chao
Jilei Chao
SWShuo Wang
Shuo Wang
BSBing Sun
Bing Sun
QHQiqi Huang
Qiqi Huang
This study employs 3-aminopropyltriethoxysilane (APTS) to eliminate the hydrophilic hydroxyl groups on the surface of silica, followed by the use of defunctionalized silica as a filler and boric acid (BA) as a crosslinking agent to prepare a polyvinyl alcohol (PVA)/silica coating. The experimental results indicate that the coating not only reduces the inherent hydrophilicity of PVA, but also enhances the uniformity and film forming properties of the coating, providing a solid foundation for patterning leather surfaces. The characterization results show that, when the mass ratio of silica-APTS is 3.0 wt% and boric acid is 2.0 wt%, the resulting coating exhibits stable physical properties, low water absorption, moderate viscosity, and excellent smoothness. Moreover, it forms a dense film on a leather surface, effectively covering pores and smoothing the texture. Furthermore, directly printing on the modified leather surface enables the creation of clear patterns that meet the requirements for fine printing, offering an experimental basis for developing leather surface coatings with superior water resistance and printability.

1 May 2025 in Journal of Imaging Science and Technology
Verified
Journal Article
Closed access
PDF file
FCFuqiang Chu
Fuqiang Chu
YFYuhang Fu
Yuhang Fu
JCJilei Chao
Jilei Chao
CLChuang Liu
Chuang Liu
The problem of bacterial adhesion, bacterial transmission, and bacterial infection in food packaging has serious implications for the global economy and human health. Therefore, in recent decades, research specialists have worked to develop antibacterial materials which inhibit the growth of bacteria or achieve effective sterilization. To address the issues attributed to bacteria, this study created a superhydrophobic and antibacterial paper by adsorbing a layer of tea polyphenols and the FeCl 3 reaction product on the surface of kraft paper, immersing it in AgNO 3 solution for the in situ reduction of nanosilver, repeating the process four times, and then treating the surface with palm wax to reduce surface energy. The paper created showed excellent antibacterial properties ( S. aureus inhibition rate of 99.963%, E. coli inhibition rate of 99.997%), superhydrophobicity (contact angle of water >155 ∘ , sliding angle <5 ∘ ), stability, moisture-resistant performance, and reusability. This superhydrophobic antibacterial paper is extremely suitable for application in food packaging.

6 September 2026 in Gels
Verified
Journal Article
Open access
PDF file
JLJun Jia Liu
Jun Jia Liu
FCFuqiang Chu
Fuqiang Chu
HZHaikuo Zhang
Haikuo Zhang
JCJilei Chao
Jilei Chao
Flexible gel sensors can lose mechanical compliance and electrical stability at low temperature or during solvent loss. A poly(vinyl alcohol) (PVA)/sodium alginate (SA)/graphene oxide (GO) composite gel was prepared by freeze–thaw cycling and post-treated in either aqueous NaCl or a NaCl-containing water/glycerol mixture (1:2, v/v). The water/glycerol–NaCl-treated gel (F-G/S/P/G) exhibited a maximum tensile stress of 428 ± 27 kPa and an elongation at break of 432 ± 27% at room temperature (n = 3), and remained visibly deformable after 24 h at −20 °C. During ambient storage, it retained approximately 89% of its initial mass after 35 days. The cycle-averaged peak ΔR/R0 increased from 0.135 at 20% strain to 1.142 at 250% strain, and the 20–60% linear region gave a gauge factor of 1.01 (R2 = 0.9988). Three independently prepared sensing elements gave a peak ΔR/R0 of 0.710 ± 0.019 at 100% strain, with response and recovery times of 1.22 ± 0.07 and 1.04 ± 0.06 s, respectively. After 500 cycles at 100% strain, the normalized peak response retained 95.1% of its initial value. Overall, F-G/S/P/G combined low-temperature deformability, ambient-storage mass retention, and repeatable resistance sensing.

1 May 2026 in Journal of Imaging Science and Technology
Verified
Journal Article
Closed access
PDF file
FCFuqiang Chu
Fuqiang Chu
SWShuo Wang
Shuo Wang
YLYunhui Luo
Yunhui Luo
JCJilei Chao
Jilei Chao
YWYuhan Wang
Yuhan Wang
DLDutao Li
Dutao Li
This research develops mathematical models of C, M, Y, K and CIE L ∗ a ∗ b ∗ chromaticity values to minimize the errors between the predicted ratio and the actual ratio of process colors (cyan, magenta, yellow, black) on holographic paper by measuring and analyzing the data after mixing the basic inks according to proportion. It obtains the least squares estimation points by performing the multiple nonlinear regression analysis method in MATLAB. Moreover, by replacing the values of CIE L ∗ a ∗ b ∗ chromaticity, the regression significance of the mathematical model is verified and the corresponding basic ink mass ratio is obtained. The results reveal that the RMSE, MAE, and R 2 values of spectral prediction models, which are established by multiple nonlinear regression analysis, show small errors between the predicted and the actual outcomes.