This study presents an under-actuated snake arm maintainer (SAM) for complex and extreme environments such as nuclear power plants. The structure adopts the layered cable drive principle, whereby a single drive layer drives multiple joints. This design significantly reduces the complexity of the control system while increasing the spatial curvature. The traction of multiple wire ropes with a composite capstan drives the synchronous angular motion of several adjacent joints. By changing the number of joints in the single driver layer of the snake arm, the arm can be adapted to various complex environments. The trajectory planning and trajectory tracking motion control methods of the under-actuated SAM are established based on the improved backbone method and the variable rod length algorithm. Finally, a 10-joint prototype with an arm length of 2300 mm is designed for nuclear reactor maintenance. Trajectory experiments confirmed the rationality of the under-actuated SAM, the correctness of the inverse kinematics, and the effectiveness of the motion control methods.
22 June 2024 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
Continuum robots are flexible and compliant. Compared to the case in conventional articulated manipulators, the driving unit can be placed outside the workspace of the robot, so that the motion orientation has a relatively complete linear configuration flow, which can be applied to a special environment with narrow and multiple obstacles such as aerospace. This study presents the development process of a tendon-driven continuum robot (TCR) with a high length-diameter ratio. The skeleton structure which imitates a snake is composed of continuous joints in series. The driving device is operated by using a tendon-driven method, which reduces the complexity of the driving box and control system significantly. The diameter of the robot is designed to be 5 mm, which enables it to work in a narrow and slender space with certain flexibility. Subsequently, a kinematic model of the robot is established. The mode function backbone method is applied to realize TCR trajectory planning. An idea of segmented solving is adopted to achieve trajectory tracking control of the continuum robot. Finally, a prototype of the continuum robot is produced, and the rationality of the robot design and the effectiveness of the motion control method are verified through trajectory simulations and experiments. The robot can perform inspection tasks within a narrow gap of 20 mm with good environmental adaptability.
Traditional mobile robots are mainly divided into wheeled robots and legged robots. They have good performance at fast-moving speeds and crossing obstacles, and weak terrain adaptability and moving speeds, respectively. Combining the advantages of these two types mentioned, a multi-functional wheel-legged hexapod robot with strong climbing capacity was designed in this paper. Each wheel-leg of the robot is driven directly by a single motor and can move smoothly and quickly in a diagonal tripod gait. Based on the obstacle-crossing way of the wheel-leg and combined with the characteristics of insects moving stably in nature, the middle part of the robot body is wider than head and tail. Tripod gait was selected to control the robot locomotion. A series of simulations and experiments were conducted to validate its excellent adaptability to various environmental conditions. The robot can traverse rugged, broken, and obstacle-ridden ground and cross rugged surfaces full of obstacles without any terrain sensing or actively controlled adaptation. It can negotiate obstacles of approximately its own height, which is much higher than its centre of gravity range.
Although harmonic drives have been adopted by all sorts of industrial environments, the mathematical expression of its dynamics has not yet been fully solved. An intelligent algorithm based on data acquisition is used to analyze the kinematic parameter of the flexible manipulator offline to improve the accuracy of predicting output torque. In this study, a method is proposed to capture the dynamics of harmonic drive systems, such as temperature, speed, and load. A friction model is proposed, and the model parameters are estimated by MCMC (Markov chain Monte Carlo) approximation. The accuracy of the estimated parameters in different conditions is calculated, and the sensitivity to parameter uncertainty of the proposed model is considered.