An effective maximum power point tracking (MPPT) technique plays a crucial role in improving the efficiency and performance of grid-connected renewable energy sources (RESs). This paper uses the African Vulture Optimization Algorithm (AVOA), a metaheuristic technique inspired by nature, to tune the proportional–integral (PI)-based MPPT controllers for hybrid RESs of solar photovoltaic (PV) and wind systems, as well as the PI controllers in a storage system that are used to smooth the output fluctuations of those RESs in a hybrid system. The performance of the AVOA is compared with that of the widely used the particle swarm optimization (PSO) technique, which is commonly acknowledged as the foundation of swarm intelligence. As a result, this technique is introduced in this study to draw a comparison. It is observed that the proposed algorithm outperformed the PSO algorithm in terms of the tracking speed, robustness, and best convergence to the minimum value. A MATLAB/Simulink model was built, and optimization and simulation for the proposed system were carried out to verify the introduced algorithms. In conclusion, the optimization and simulation results showed that the AVOA is a promising method for solving a variety of engineering problems.

In this study, optimal decision-making process in photovoltaic (PV) system location selection in Saudi Arabia is described. First, to identify the criteria that influence the decision of selecting a suitable location for the PV system, the geographical information system (GIS)-based multi-criteria decision making (MCDM) approach is used. Next, to assess the weights of the criteria that present different aspects of the investigated locations, four major criteria and 11 sub-criteria are proposed, and analytic hierarchy process (AHP) is applied to develop comparison decision matrix. Finally, the order preference by similarity to ideal solution (TOPSIS) technique evaluates and classifies 17 cities (such as Riyadh, Jeddah) in Saudi Arabia. The result shows that Tabuk city in the northern of Saudi Arabia is the best location. Among the 17 cities, the performance score of seven cities is above or equal 80%, and Tabuk city has the highest score with 87%. This analytical approach could contribute as an early planning to locate suitable sites for the selection of PV system region in Saudi Arabia.

The rapid revolution in the solar industry over the last several years has increased the significance of photovoltaic (PV) systems. Power photovoltaic generation systems work in various outdoor climate conditions; therefore, faults may occur within the PV arrays in the power system. Fault detection is a fundamental task needed to improve the reliability, efficiency, and safety of PV systems, and, if not detected, the cost associated with the loss of power generated from PV modules will be quite high. Moreover, maintenance staff will take more time and effort to fix undetermined faults. Due to the current-limiting nature and nonlinear output characteristics of PV arrays, fault detection is not that easy and the application of artificial intelligence is proposed for the sake of fault detection in PV systems. The idea behind this approach is to compare the faulty PV module with its accurate model (factory fingerprint) by checking every PV array’s I–V and P–V curves using the Artificial Neural Network (ANN) logarithm as a subsection of the Artificial Intelligence’s (AI) techniques. This proposed approach achieves a high performance of fault detection and gives the advantage of determining what type of fault has occurred. The results confirm that the proposed logarithm performance becomes better as the number of distinguishing points extend, providing great value to the Solar PV industry.

Wind power forecasting plays a key role in the design and maintenance of wind power generation which can directly help to enhance environment resilience. Offshore wind power forecasting has become more challenging due to their operation in a harsh and multi-faceted environment. In this paper, the data generated from offshore wind turbines are used for power forecasting purposes. First, fragmented data is filtered and Deep Auto-Encoding is used to select high dimensional features. Second, a mixture of the CNN and LSTM models is used to train prominent wind features and further improve forecasting accuracy. Finally, the CNN-LSTM deep learning hybrid model is fine-tuned with various parameters for reliable forecasting of wind energy on three different offshore Windfarms. A state-of-the-art comparison against existing models is presented based on root mean square error (RMSE) and mean absolute error (MAE) respectively. The forecasting analyses indicate that the proposed CNN-LSTM strategy is quite successful for offshore wind turbines by retaining the lowest RMSE and MAE along with high forecasting accuracy. The experimental findings will be helpful to design environment resilient energy transition pathways.

In this paper, we show the development of a demand-side management solution (DSMS) for demand response (DR) aggregator and actual demand response operation cases in South Korea. To show an experience, Korea’s demand response market outline, functions of DSMS, real contracted capacity, and payment between consumer and load aggregator and DR operation cases are revealed. The DSMS computes the customer baseline load (CBL), relative root mean squared error (RRMSE), and payments of the customers in real time. The case of 10 MW contracted customers shows 108.03% delivery rate and a benefit of 854,900,394 KRW for two years. The results illustrate that an integrated demand-side management solution contributes by participating in a DR market and gives a benefit and satisfaction to the consumer.

Long-distance offshore wind power transmission systems utilize multi-terminal high voltage direct current (MT-HVDC) connections based on voltage source converters (VSCs). In addition to having the potential to work around restrictions, the VSC-based MT-HVDC transmission system has significant technical and economic merits over the HVAC transmission system. Offshore wind farms (OWFs) will inevitably grow because of their outstanding resistance to climate change and ability to provide sustainable energy without producing hazardous waste. Due to stronger and more persistent sea winds, the OWF often has a higher generation capacity with less negative climate effects. The majority of modern installations are distant from the shore and produce more power than the early OWF sites, which are situated close to the shore. This paradigm shift has compelled industry and professional researchers to examine transmission choices more closely, specifically HVAC and HVDC transmission. This article conducts a thorough analysis of grid connection technologies for massive OWF integration. In comparison to earlier assessments, a more detailed discussion of HVDC and HVAC topologies, including HVDC based on VSCs and line-commutated converters (LCCs), and all DC transmission systems, is offered. Finally, a selection criterion for HVDC transmission is advised, and its use is argued to be growing.