As solar energy is a low-cost and clean energy source, there has been a great deal of interest in how to harvest it. To absorb solar energy efficiently, we designed a broadband metamaterial absorber based on the principle of Fabry–Pérot (FP) cavities and surface plasmon resonance (SPR). We propose a broadband perfect absorber consisting of a four-layer structure of silica–tungsten–silica–titanium (SiO2–W–SiO2–Ti) for the incident light wavelength range of 300–2500 nm. The structure achieves perfect absorption of incident light in the wavelength range of 351.8–2465.0 nm (absorption > 90%), with an average absorption of 96.3%. The advantage of our proposed structure is that it combines the characteristics of both high and broadband absorption, and has high overall absorption efficiency for solar radiation. It is also independent of polarization and insensitive to incident angle. We investigated how absorption was affected by different structures, materials, geometric parameters, and refractive indices for different dielectric materials, and we explored the reasons for high absorption. This structure is refractory and ultrathin, and it offers a good tradeoff between bandwidth and absorption. It therefore has premium application prospects and value.
In this study, we simulate how much solar energy a proposed planar dielectric-metal (SiO2-Ti-SiO2-Ti-SiO2-Ti-SiO2-W) structure can absorb by employing FDTD solutions. The proposed structure is ultrathin (510.1 nm). It can absorb incident light within a wavelength range of 345 to at least 2500 nm with an average absorption of 97.8% for the incident light in the 345–2500 nm band while maintaining efficient absorption for a wide range of incident light when its angle changes and being insensitive to the polarization angle of the incident light. In addition, the Particle Swarm Optimization algorithm was used to optimize the proposed planar structure, and the optimality of the 8-layer structure was investigated. In addition, we compare the proposed structure to those of others, analyze the reasons for the structure's perfect absorption, and discuss the resonance mode that occurs during the absorption process, which demonstrates the rationale behind its perfect absorption. As a result, the proposed device can efficiently and sustainably collect solar energy.
As solar energy is a low-cost and clean energy source, there has been a great deal of interest in how to harvest it. To absorb solar energy efficiently, we have designed a broadband metamaterial absorber based on the principle of Fabry–Pérot (FP) cavity and surface plasmon resonances (SPRs). We propose a broadband perfect absorber consisting of a four-layer structure of silica-tungsten-silica-titanium (SiO2-W-SiO2-Ti) for the incident light wavelength range of 300–2500 nm. The structure achieves perfect absorption of incident light in the wavelength range of 351.8–2465.0 nm (absorption >90%), with an average absorption of 96.3%. The advantage of our proposed structure is that it combines the characteristics of both high and broadband absorption and has a high overall absorption efficiency for solar radiation. It is also independent of polarization and insensitive to incident angle. We investigated how absorption was affected by different structures, materials, geometrical parameters, and refractive indices for different dielectric materials, and we explored the reasons for high absorption. This structure is refractory and ultra-thin, and it offers a good trade-off between bandwidth and absorption. It therefore has premium application prospects and value.