1 December 2020 in Applied Surface Science
18 April 2023 in Optics Express
Passive power generation has recently stimulated interest in thermoelectric generators (TEGs) using the radiative cooling mechanism. However, the limited and unstable temperature difference across the TEGs significantly degrades the output performance. In this study, an ultra-broadband solar absorber with a planar film structure is introduced as the hot side of the TEG to increase the temperature difference by utilizing solar heating. This device not only enhances the generation of electrical power but also realizes all-day uninterrupted electrical output due to the stable temperature difference between the cold and hot sides of the TEG. Outdoor experiments show the self-powered TEG obtains maximum temperature differences of 12.67 °C, 1.06 °C, and 5.08 °C during sunny daytime, clear nighttime, and cloudy daytime, respectively, and generates output voltages of 166.2 mV, 14.7 mV, and 95 mV, respectively. Simultaneously, the corresponding output powers of 879.25 mW/m2, 3.85 mW/m2, and 287.27 mW/m2 are produced, achieving 24-hour uninterrupted passive power generation. These findings propose a novel strategy to combine solar heating and outer space cooling by a selective absorber/emitter to generate all-day continuous electricity for unsupervised small devices.
26 October 2021 in Optics Express
Mid-infrared absorption spectroscopy is an effective method for detecting analyte fingerprints without labeling, but the inherent loss of metals in current methods is a main issue. Here, a sensing scheme was proposed that uses an all-dielectric grating metasurface and angular scanning of polarized light, and then it was verified by numerical simulation. The proposed fingerprint detection scheme could effectively couple a guided-mode resonance spectrum peak with the characteristic peak of the analyte’s phonon-polariton in the mid-infrared region, significantly enhancing the interaction between light and the analyte. The novel scheme would realize broadband enhancement to detect a variety of substances, and facilitate mid-infrared sensing and analysis of trace substances.
2 February 2023 in Results in Physics
14 February 2023 in Optical Materials Express
In this study, we simulate how much solar energy a proposed planar dielectric-metal (SiO2-Ti-SiO2-Ti-SiO2-Ti-SiO2-W) structure can absorb by employing FDTD solutions. The proposed structure is ultrathin (510.1 nm). It can absorb incident light within a wavelength range of 345 to at least 2500 nm with an average absorption of 97.8% for the incident light in the 345–2500 nm band while maintaining efficient absorption for a wide range of incident light when its angle changes and being insensitive to the polarization angle of the incident light. In addition, the Particle Swarm Optimization algorithm was used to optimize the proposed planar structure, and the optimality of the 8-layer structure was investigated. In addition, we compare the proposed structure to those of others, analyze the reasons for the structure's perfect absorption, and discuss the resonance mode that occurs during the absorption process, which demonstrates the rationale behind its perfect absorption. As a result, the proposed device can efficiently and sustainably collect solar energy.
16 September 2025 in Physical Chemistry Chemical Physics
A dielectric metagrating metasensor combining guided mode resonance and quasi-BIC enables broadband, high-sensitivity terahertz molecular fingerprint detection with multiplexing strategies for practical biosensing and chemical analysis.