Mohammad. A. Barique

Prof. Mohammad. A. Barique


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 January 2018 in ACS Omega
Verified
Journal Article
Open access
MBMohammad. A. Barique
Mohammad. A. Barique
ETEiji Tsuchida
Eiji Tsuchida
AOAkihiro Ohira
Akihiro Ohira
KTKohji Tashiro
Kohji Tashiro
For the first time, we report the effects of elevated temperatures, from 80 to 100 °C, on the changes in the states of water and ion–water channels and their correlation with the proton conductivity of Nafion NR212, which was investigated using a Fourier transform infrared spectroscopy study. Experimentally, three types of water aggregates, protonated water (H+(H2O)n), nonprotonated hydrogen (H)-bonded water (H2O···H2O), and non-H-bonded water, were found in Nafion, and the existence of those three types of water was confirmed through ab initio molecular dynamics simulation. We found that the proton conductivity of Nafion increased for up to 80 °C, but from 80 to 100 °C, the conductivity did not increase; rather, all of those elevated temperatures showed identical conductivity values. The proton conductivities at lower relative humidities (RHs) (up to 50%) remained nearly identical for all elevated temperatures (80, 90, and 100 °C); however, from 60% RH (over λ = 4), the conductivity remarkably jumped for all elevated temperatures. The results indicated that the amount of randomly arranged water gradually increased and created more H-bonded water networks in Nafion at above 60% RH. From the deconvolution of the O–H bending band, it was found that the volume fraction fi (i=each deconvoluted band) of H-bonded water for elevated temperatures (>80–100 °C) increased remarkably higher than for 60 °C.

3 April 2020 in Sensors
Verified
Journal Article
Open access
PDF file
RNRatno Nuryadi
Ratno Nuryadi
LALia Aprilia
Lia Aprilia
MHMakoto Hosoda
Makoto Hosoda
MBMohammad. A. Barique
Mohammad. A. Barique
AUArief Udhiarto
Arief Udhiarto
HMHidenori MIMURA
Hidenori MIMURA
An oscillating piezoresistive microcantilever (MC) coated with an aluminum (Al)-doped zinc oxide (ZnO) nanorods was used to detect carbon monoxide (CO) in air at room temperature. Al-doped ZnO nanorods were grown on the MC surface using the hydrothermal method, and a response to CO gas was observed by measuring a resonant frequency shift of vibrated MC. CO gas response showed a significant increase in resonant frequency, where sensitivity in the order of picogram amounts was obtained. An increase in resonant frequency was also observed with increasing gas flow rate, which was simultaneously followed by a decrease in relative humidity, indicating that the molecular interface between ZnO and H2O plays a key role in CO absorption. The detection of other gases of carbon compounds such as CO2 and CH4 was also performed; the sensitivity of CO was found to be higher than those gases. The results demonstrate the reversibility and reproducibility of the proposed technique, opening up future developments of highly sensitive CO-gas detectors with a fast response and room temperature operation.

10 October 2020 in Nanotechnology
Verified
Journal Article
Closed access
PDF file
MBMohammad. A. Barique
Mohammad. A. Barique
YNYoichiro Neo
Yoichiro Neo
MNMasaji Noyori
Masaji Noyori
LALia Aprilia
Lia Aprilia
MAMasaya Asai
Masaya Asai
HMHidenori Mimura
Hidenori Mimura
In this study, highly-aligned and molecularly oriented poly(vinylidene fluoride/trifluoroethylene) [P(VDF/TrFE)] nanofiber webs were fabricated and their piezoelectric response was investigated. Using systematic post-treatments under appropriate conditions, a significant enhancement of the piezoelectric response in the P(VDF/TrFE) nanofiber webs was observed for the first time. The high-quality nanofibers exhibited a large output voltage of 0.4 V. The short-circuit current of post-treated nanofibers was found to be 731.25 μA, which increased about 330 times and the surface electric charge density was found to be 0.64 nC cm-2, which was about 2.7 times higher than those of the as-spun nanofibers. The large enhancement of piezoelectric response of the nanofibers is attributed to the additional stretching, annealing and poling of the as-spun nanofibers under the appropriate post-treatment conditions. The results highlight the potential of the high-quality P(VDF/TrFE) nanofibers to be used as wearable piezoelectric energy harvesters and other flexible self-powered portable devices.

9 August 2022 in Polymers
Verified
Journal Article
Open access
PDF file
WTWataru Takarada
Wataru Takarada
MBMohammad. A. Barique
Mohammad. A. Barique
TKTatsuma Kunimitsu
Tatsuma Kunimitsu
TKTakao Kameda
Takao Kameda
TKTakeshi Kikutani
Takeshi Kikutani
A ‘model’ material of recycled polypropylene (PP) was prepared through the injection molding process, and the effect of processing history on the polymer characteristics was investigated through the high-speed melt spinning of virgin and recycled PP. On-line measurement of the thinning behavior of the spin-line revealed the downstream shift of solidification point for the recycled PP at the take-up velocity of 1.0 km/min, indicating the suppression of flow-induced crystallization. The difference was not clear at higher take-up velocities of up to 5 km/min. For any identical take-up velocity, no clear difference in the stress-strain curves and birefringence of the fibers from virgin and recycled PP could be observed, whereas the detailed investigation on the variation of relative amount of c-axis and a*-axis oriented crystals in the fibers prepared at varied take-up velocities suggested the deterioration of flow-induced crystallization at 1.0 km/min. It was speculated that the processing history induced the lowering of the entanglement density, which affected the melt spinning and crystallization behavior. An undistinguishable difference between the virgin and recycled PP at increased take-up velocities suggested the existence of an optimum elongational strain rate for the detection of the different states of molecular entanglement.

19 June 2020 in Japanese Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
LALia Aprilia
Lia Aprilia
RNRatno Nuryadi
Ratno Nuryadi
MHMakoto Hosoda
Makoto Hosoda
MBMohammad. A. Barique
Mohammad. A. Barique
AUArief Udhiarto
Arief Udhiarto
HMHidenori Mimura
Hidenori Mimura
A highly sensitive (at the picogram order) Al-doped-ZnO nanorods (AZNRs)-coated resonant microcantilever (MC) for carbon monoxide (CO) gas sensing, operable at ambient temperature and under humid condition was synthesized. The ZnO nanorods were grown on the MC surface by using the hydrothermal method and doped by aluminum (Al). The sensitivities of un-doped and AZNRs for various CO gas concentrations were investigated by measuring the changes in the resonant frequencies and the Q -factor analysis of the vibrating MCs. The mechanisms of the remarkable enhancement of the sensitivity of the AZNRs-coated-microcantilever to CO were thoroughly investigated and discussed on the basis of energy gap between the highest occupied molecular orbital-lowest occupied molecular orbital of AZNRs and CO, active surface area of AZNRs, and the interaction of water vapor on AZNRs surface with CO.

28 June 2019 in Ferroelectrics Letters Section
Verified
Journal Article
Closed access
MBMohammad. A. Barique
Mohammad. A. Barique
YMYasuhiro Matsuda
Yasuhiro Matsuda
KMKazuma Matsuyama
Kazuma Matsuyama
STShigeru Tasaka
Shigeru Tasaka
Ferroelectric behavior was observed in the crystalline copolymers of vinylidene chloride (VDC) with vinylchloride (VC) and with methylacrylate (MA). A D-E hysteresis loop for P(VDC/VC) copolymer observed at above its glass transition temperature indicates the ferroelectricity of this copolymer. The remanent polarization was between 30 and 122 mC/m2, and pyroelectric constants of the copolymers was stable up to almost their melting points. The results of FTIR and XRD suggested that the electric behaviors of P(VDC/VC) copolymers were caused by the orientation of C-Cl dipoles in VDC chains in the crystal region to form a polar structure in a high electric field.