A-Q switched pulsed ytterbium-doped fiber laser is created and optimized for frequency doubling and tripling. The spectral width of the laser radiation (less than 0.13 nm) is controlled using a Bragg grating. At a pulse repetition rate of 1 kHz, the peak power is greater than 13 kW and the pulse duration is 30 ns.
9 May 2012 in Journal of the Optical Society of America B
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
The frequency doubling and tripling in a Q-switched all-fiber laser are studied. It is demonstrated that the main limitations on the efficiency of the harmonic generation are related to the random polarization that is nonuniform with respect to axes, the asymmetric pulse shape with a flat trailing edge, and the significant spectral broadening of the multimode radiation of the fiber master oscillator in the fiber amplifier. The methods to increase the efficiency are proposed. For an IR pulse energy of about 0.3 mJ, duration of about 40 ns, and repetition rate of 1 kHz, the second- and third-harmonic pulse energies are greater than 60 and about 10 μJ, respectively.
Actively mode locked Raman lasing in a ring PM-fiber cavity pumped by a linearly polarized Yb-doped fiber laser is studied. At co-propagating pumping, a stochastic pulse with duration defined by the AOM switching time (~15 ns) is generated with the round-trip period. At counter-propagating pumping, one or several sub-ns pulses (within the AOM switching envelope) are formed. It has been found that the formation of such stable multi-pulse structure is defined by the single-pulse energy limit (~20 nJ) set by the second-order Raman generation. Adding a NPE-based saturable absorber in the actively mode locked cavity, results in sufficient shortening of the generated pulses both in single- and multi-pulse regimes (down to 50 ps). A model is developed adequately describing the regimes.
Frequency doubling of multimode diode-pumped GRIN-fiber Raman laser with improved beam quality (M2=1.9-2.6 depending on configuration) in a simple single-pass scheme with 5-mm PPLN crystal is studied. After scheme optimization and elimination of back reflection and crystal heating effects, an efficient conversion into blue spectral range with output power of about 0.4 W@488 nm and 0.64 W@477 nm has been demonstrated.
Multimode fibers are attractive for high-power lasers if transverse modes are efficiently controlled. Here, a dielectric thin-film mirror (R~20%) is micro-fabricated on the central area of the end face of a 1 km multimode 100/140 µm graded-index fiber and tested as the output mirror of a Raman laser with highly multimode (M2~34) 940 nm diode pumping. In the cavity with highly reflective input FBG, Raman lasing of the Stokes wave at 976 nm starts at the threshold pump power of ~80 W. Mode-selective properties of mirrors with various diameters were tested experimentally and compared with calculations in COMSOL, with the optimum diameter found to be around 12 µm. The measured Raman laser output beam at 976 nm has a quality factor of M2~2 near the threshold, which confirms a rather good selection of the fundamental transverse mode. The power scaling capabilities, together with a more detailed characterization of the output beam’s spatial profile, spectrum, and their stability, are performed. An approximately 35 W output power with an approximately 60% slope efficiency and a narrow spectrum has been demonstrated at the expense of a slight worsening of beam quality to M2~3 without any sign of mirror degradation at the achieved intensity of >30 MW/cm2. Further power scaling of such lasers as well as the application of the proposed technique in high-power fiber lasers are discussed.