Noel León Albiter

Dr. Noel León Albiter

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 July 2022 in Gels
Verified
Journal Article
Open access
PDF file
LCLucía G De la Cruz
Lucía G De la Cruz
Tobias AbtTobias Abt
Tobias Abt
NANoel León Albiter
Noel León Albiter
LWLiang Wang
Liang Wang
Miguel Sanchez-SotoMiguel Sanchez-Soto
Miguel Sanchez-Soto
With the commitment to reducing environmental impact, bio-based and biodegradable aerogels may be one approach when looking for greener solutions with similar attributes to current foam-like materials. This study aimed to enhance the mechanical, thermal, and flame-retardant behavior of poly(vinyl alcohol) (PVA) aerogels by adding sodium alginate (SA) and tannic acid (TA). Aerogels were obtained by freeze-drying and post-ion crosslinking through calcium chloride (CaCl2) and boric acid (H3BO3) solutions. The incorporation of TA and SA enhanced the PVA aerogel’s mechanical properties, as shown by their high compressive specific moduli, reaching up to a six-fold increase after crosslinking and drying. The PVA/TA/SA aerogels presented a thermal conductivity of 0.043 to 0.046 W/m·K, while crosslinked ones showed higher values (0.049 to 0.060 W/m·K). Under TGA pyrolytic conditions, char layer formation reduced the thermal degradation rate of samples. After crosslinking, a seven-fold decrease in the thermal degradation rate was observed, confirming the high thermal stability of the formed foams. Regarding flammability, aerogels were tested through cone calorimetry. PVA/TA/SA aerogels showed a significant drop in the main parameters, such as the heat release rate (HRR) and the fire growth (FIGRA). The ion crosslinking resulted in a further reduction, confirming the improvement in the fire resistance of the modified compositions.

10 September 2023 in ACS Applied Polymer Materials
Verified
Journal Article
Open access
LCLucía G De la Cruz
Lucía G De la Cruz
Tobias AbtTobias Abt
Tobias Abt
NANoel León Albiter
Noel León Albiter
Miguel Sanchez-SotoMiguel Sanchez-Soto
Miguel Sanchez-Soto

6 May 2021 in Polymers
Verified
Journal Article
Open access
PDF file
Nicolas CandauNicolas Candau
Nicolas Candau
OOOguzhan Oguz
Oguzhan Oguz
NANoel León Albiter
Noel León Albiter
GFGero Förster
Gero Förster
MMMaria Lluisa Maspoch
Maria Lluisa Maspoch
Poly (Lactic Acid) (PLA)/Ground Tire Rubber (GTR) blends using Dicumyl peroxide (DCP) as a crosslinking agent were prepared with the following aims: propose a new route to recycle wastes rubber from the automotive industry and improve the toughness and impact strength of the inherently brittle bio-based PLA. The GTR were subjected to two types of grinding process (cryo- and dry ambient grinding). Swelling measurements revealed the grinding to be associated with a mechanical damage of the rubber chains, independently on the type of grinding or on the GTR size (from <400 µm to <63 µm). Moreover, the finest GTR contains the largest amount of reinforcing elements (carbon black, clay) that can be advantageously used in PLA/GTR blends. Indeed, the use of the finest cryo-grinded GTR in the presence of DCP showed the least decrease of the tensile strength (−30%); maintenance of the tensile modulus and the largest improvement of the strain at break (+80%), energy at break (+60%) and impact strength (+90%) as compared to the neat PLA. The results were attributed to the good dispersion of both fine GTR and clay particles into the PLA matrix. Moreover, a possible re-crosslinking of the GTR particles and/or co-crosslinking at PLA/GTR interface in presence of DCP is expected to contribute to such improved ductility and impact strength.

10 August 2022 in Journal of Applied Polymer Science
Verified
Journal Article
Open access
Nicolas CandauNicolas Candau
Nicolas Candau
NANoel León Albiter
Noel León Albiter
PCPol Roura Coll
Pol Roura Coll
MMMaria Lluisa Maspoch
Maria Lluisa Maspoch
PLA/natural rubber (NR)/wastes tire rubber (GTR) were dynamically vulcanizing using dicumyl peroxide (DCP). Swelling, dissolution, and electron microscopy revealed that the unvulcanized and weekly vulcanized blends (DCP < 3 wt%) show a continuous rubber phase while the highly vulcanized blends (DCP > 3 wt%) show co‐continuous rubber/PLA phase. In the latter blends, the tensile toughness (1.3 MJ m−3) and the tensile‐impact strength of the neat PLA (58 kJ m−2) were increased of a factor 12.5 and 8.3 respectively. Moreover, the appropriate crosslinking agent content (3–3.75 wt%) in the ternary blends allowed to reach same tensile toughness, impact strength, shape recovery and shape fixity as compared to their equivalent binary PLA/NR blends.

27 December 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Félix CarrascoFélix Carrasco
Félix Carrasco
OPOrlando Santana Pérez
Orlando Santana Pérez
NANoel León Albiter
Noel León Albiter
MMMaria Lluisa Maspoch
Maria Lluisa Maspoch
Poly(lactic acid) (PLA) and biosourced polyamide (PA) bioblends, with a variable PA weight content of 10–50%, were manufactured by melt blending in order to improve the behavior of PLA against thermal degradation. The effect of reactive extrusion on the thermal performance of PLA within bioblends was analyzed. The reactive extrusion was made by means of the addition of a styrene-acrylic multi-functional-epoxide oligomeric reactive agent (SAmfE), with the commercial name of Joncryl. Four parameters were considered in order to study the thermal behavior of bioblends against thermal decomposition: the onset decomposition temperature, the shape and temperature interval of the thermal decomposition patterns, the activation energy of the thermal decomposition, and the evidence leading to the most probable mechanism. The latter was determined by means of three evidence: standardized conversion functions, y(α) master plots, and integral mean error. It was shown that reactive extrusion of PLA as well as PA incorporation to the polymer matrix of PLA were responsible for an increase in the onset decomposition temperature of 10.4 °C. The general analytical equation (GAE) was used to evaluate the kinetic parameters of the thermal degradation of PLA within bioblends for various reaction mechanisms. It was shown that the random scission of macromolecular chains is the best mechanism for both untreated and treated PLA by means of reactive extrusion. It was shown that reactive extrusion together with higher content of PA resulted in an increased protective effect against the thermal degradation of PLA as demonstrated by an increase in activation energy of 60 kJ/mol. It was found that there is a relationship between the increase in activation energy and the increase in the onset decomposition temperature when using reactive extrusion. The improvement of the thermal stability of bioblends by means of reactive extrusion was explained by an increase in the complex viscosity from 980 to 2000 Pa·s at 0.06 rad/s and from 250 to 300 Pa·s at 630 rad/s for bioblend containing 30% of PLAREX and by a finer dispersion of PA within the PLAREX matrix. Results from DSC were not conclusive regarding the compatibility between both phases.

10 August 2024 in Gels
Verified
Journal Article
Open access
PDF file
LCLucía G De la Cruz
Lucía G De la Cruz
Tobias AbtTobias Abt
Tobias Abt
NANoel León Albiter
Noel León Albiter
Miguel Sanchez-SotoMiguel Sanchez-Soto
Miguel Sanchez-Soto
Lightweight materials that combine high mechanical strength, insulation, and fire resistance are of great interest to many industries. This work explores the properties of environmentally friendly alginate aerogel composites as potential sustainable alternatives to petroleum-based materials. This study analyzes the effects of two additives (tannic acid and montmorillonite clay), the orientation that results during casting, and the crosslinking of the biopolymer with glutaraldehyde on the properties of the aerogel composites. The prepared aerogels exhibited high porosities between 90% and 97% and densities in the range of 0.059–0.191 g/cm3. Crosslinking increased the density and resulted in excellent performance under loading conditions. In combination with axial orientation, Young’s modulus and yield strength reached values as high as 305 MPa·cm3/g and 7 MPa·cm3/g, respectively. Moreover, the alginate-based aerogels exhibited very low thermal conductivities, ranging from 0.038 W/m·K to 0.053 W/m·K. Compared to pristine alginate, the aerogel composites’ thermal degradation rate decreased substantially, enhancing thermal stability. Although glutaraldehyde promoted combustion, the non-crosslinked aerogel composites demonstrated high fire resistance. No flame was observed in these samples under cone calorimeter radiation, and a minuscule peak of heat release of 21 kW/m2 was emitted as a result of their highly efficient graphitization and fire suppression. The combination of properties of these bio-based aerogels demonstrates their potential as substituents for their fossil-based counterparts.