The thermal management system of batteries plays a significant role in the operation of electric vehicles (EVs). The purpose of this study is to survey various parameters enhancing the performance of a heat pipe-based battery thermal management system (HP-BTMS) for cooling the lithium-ion batteries (LIBs), including the ambient temperature, coolant temperature, coolant flow rate, heat generation rate, start-up time, inclination angle of the heat pipe, and length of the condenser/evaporator section. This review provides knowledge on the HP-BTMS that can guarantee achievement of the optimum performance of an EV LIB at a high charge/discharge rate.
This work investigated different conceptual models for electric motorcycles, which are electric motorcycles with a home charging system, electric motorcycles using a battery swapping system, and electric motorcycles with battery swapping and photovoltaic systems, in four Southeast Asia countries. The current research focused on analyzing the impact of factors such as the number of battery packs in a swapping station, variation in battery swapping demand, the season, and photovoltaic panel size on energy utilization and carbon emissions associated with the entire energy supply chain. The objective of the current study was to evaluate and compare the well-to-wheel emissions using these different conceptual models, considering the varying energy mixes in four countries with a significant prevalence of motorcycle ownership, Thailand, Vietnam, Malaysia, and Indonesia. The results revealed that by using a 3 kW photovoltaic system, the dependency on grid energy can be significantly reduced and thus provide the highest benefits in terms of reduction of fossil fuel use and CO2 emissions. Although switching from internal combustion engine motorcycles to electric motorcycles could substantially reduce carbon emissions, it is only feasible when the primary resources used for generating electricity are sufficiently clean or battery swapping stations are equipped with a 3 kW photovoltaic system. In these four countries, electric motorcycles with battery swapping systems could accelerate the transition to a net-zero carbon emission society by reducing CO2 emissions by around 2.6–3.0 Mt-CO2 per year in the right environment. Prioritizing the decarbonization of power generation should be the primary focus, considering its critical role as a bottleneck within the system. The findings of this research hold significant value for decision-makers and investors who are actively pursuing smart city development and aiming to harness the potential of renewable energy sources.
15 April 2020 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
This paper proposes a novel design methodology for electric-bus structures by implementing the finite element method via ABAQUS™ and linear programming via MATLAB™. A monocoque sandwich-structured fiber-reinforced composite bus with a maximum driving range of 300 km is conceived using the proposed methodology. The bus-body structure is designed based on safety criteria such as vehicle registration regulations, the strength of the bus structure under various driving conditions, bending- and torsion-stiffness requirements, and the rollover testing standard of UN ECE R66. A procedure developed to systematically conduct parametric studies by varying the core and face thicknesses of the sandwich structure of each component is presented. Multivariate functions are formulated to determine the correlations of structural responses with changes in geometric parameters. Linear programming is implemented to minimize the mass of the bus structure under design constraints. The proposed monocoque bus structure meets all requirements, and its body mass is 63.3% less than the benchmark value.
1 January 2023 in Latin American Journal of Solids and Structures