Low Earth Orbit (LEO) satellite communication (SatCom) has drawn particular attention recently due to its high data rate services and low round-trip latency. It has low launching and manufacturing costs than Medium Earth Orbit (MEO) and Geostationary Earth Orbit (GEO) satellites. Moreover, LEO SatCom has the potential to provide global coverage with a high-speed data rate and low transmission latency. However, the spectrum scarcity might be one of the challenges in the growth of LEO satellites, impacting severe restrictions on developing ground-space integrated networks. To address this issue, cognitive radio and rate splitting multiple access (RSMA) are the two emerging technologies for high spectral efficiency and massive connectivity. This paper proposes a cognitive radio enabled LEO SatCom using RSMA radio access technique with the coexistence of GEO SatCom network. In particular, this work aims to maximize the sum rate of LEO SatCom by simultaneously optimizing the power budget over different beams, RSMA power allocation for users over each beam, and subcarrier user assignment while restricting the interference temperature to GEO SatCom. The problem of sum rate maximization is formulated as non-convex, where the global optimal solution is challenging to obtain. Thus, an efficient solution can be obtained in three steps: first we employ a successive convex approximation technique to reduce the complexity and make the problem more tractable. Second, for any given resource block user assignment, we adopt KarushKuhnTucker (KKT) conditions to calculate the transmit power over different beams and RSMA power allocation of users over each beam. Third, using the allocated power, we design an efficient algorithm based on the greedy approach for resource block user assignment. For comparison, we propose two suboptimal schemes with fixed power allocation over different beams and random resource block user assignment as the benchmark. Numerical results provided in this work are obtained based on the Monte Carlo simulations, which demonstrate the benefits of the proposed optimization scheme compared to the benchmark schemes.

Recent development toward innovative applications and technologies like self-driving, augmented reality, smart cities, and various other applications leads to excessive growth in the number of devices. These devices have finite computation resources and cannot handle the applications that require extensive computation with minimal delay. To overcome this, the mobile edge cloud (MEC) emerges as a practical solution that allows devices to offload their extensive computation to MEC located in their vicinity; this will lead to succeeding the arduous delay of the millisecond scale: requirement of $5^{th}$ generation communication system. This work examines the convex optimization problem. The objective is to minimize the task duration by optimal allocation of the resources like local and edge computational capabilities, transmission power, and optimal task segmentation. For optimal allocation of resources, an algorithm name E stimation of O ptimal R esource A llocator (EORA) is designed to optimize the function by keeping track of statistics of each candidate of the population. Using EORA, a comparative analysis of the hybrid approach (partial offloading) and edge computation only is performed. Results reveal the fundamental trade-off between both of these models. Simultaneously, the impact of devices’ computational capability, data volume, and computational cycles requirement on task segmentation is analyzed. Simulation results demonstrate that the hybrid approach: partial offloading scheme reduces the task's computation time and outperforms edge computing only.

Low Earth Orbit (LEO) satellite networks are expected to play a crucial role in providing high-speed internet access and low-latency communication worldwide. However, some challenges can affect the performance of LEO satellite networks. For example, they can face energy and spectral efficiency challenges, such as high power consumption and spectral congestion, due to the increasing number of satellites. Furthermore, mobile ground users tend to operate with low directive antennas, which pose significant challenges in closing the LEO-to-ground communication link, especially when operating at a high-frequency range. To overcome these challenges, energy-efficient technologies like reconfigurable intelligent surfaces (RIS) and advanced spectrum management techniques like non-orthogonal multiple access (NOMA) can be employed. RIS can improve signal quality and reduce power consumption, while NOMA can enhance spectral efficiency by sharing the same resources among multiple users. This paper proposes an energy-efficient RIS-assisted downlink NOMA communication for LEO satellite networks while ensuring the quality of services. The proposed framework simultaneously optimizes the NOMA transmit power of the LEO satellite and the passive beamforming of RIS, considering the assumption of imperfect successive interference cancellation. Due to the nature of the considered system and optimization variables, the energy efficiency maximization problem is non-convex. In practice, obtaining the optimal solution for such problems is very challenging. Therefore, we adopt alternating optimization methods to handle the joint optimization in two steps. In step 1, for any given phase shift vector, we calculate satellite transmit power towards each ground terminal using the Lagrangian dual method. Then, in step 2, given the transmit power, we design passive beamforming for RIS by solving the semi-definite programming. We also compare our solution with a benchmark framework having a fixed phase shift design and a conventional NOMA framework without involving RIS. Numerical results show that the proposed optimization framework achieves 21.47% and 54.9% higher energy efficiency compared to the benchmark and conventional frameworks.

In the next generation wireless communication paradigm, the number of devices are expected to increase exponentially after the concept of internet of things (IoT). These devices are power constrained, with limited processing capability. Therefore, in order to get the maximum advantage from these low power IoT sensing devices, it is of utmost need to empower them. Similarly, the devices are not able to process the computationally intensive applications. In this work, Wireless Power Mobile Edge Cloud (WPMEC) is considered, which is an integration of Wireless Power Transfer (WPT) and Mobile Edge Cloud (MEC) to address low power devices’ battery and computational capabilities. The WPMEC is charging the devices in the first phase using the WPT and in the second phase, the devices are offloading their computational intensive data to the MEC. Partial offloading scheme is first time introduced and analyzed with WPMEC. Performance of proposed solution is evaluated in terms of overall network computational energy efficiency. Extensive simulations have been carried out to validate the proposed solution. It is shown that the proposed partial offloading scheme with WPMEC outperforms the binary and local computational schemes.

Unmanned aerial vehicles (UAV) have emerged as a practical solution that provides on-demand services to users in areas where the terrestrial network is non-existent or temporarily unavailable, e.g., due to natural disasters or network congestion. In general, UAVs' user-serving capacity is typically constrained by their limited battery life and the finite communication resources that highly impact their performance. This work considers the orthogonal frequency division multiple access (OFDMA) enabled multiple unmanned aerial vehicles (multi-UAV) communication systems to provide on-demand services. The main aim of this work is to derive an efficient technique for the allocation of radio resources, 3D placement of UAVs, and user association matrices. To achieve the desired objectives, we decoupled the original joint optimization problem into two sub-problems: (i) 3D placement and user association and (ii) sum-rate maximization for optimal radio resource allocation, which are solved iteratively. The proposed iterative algorithm is shown via numerical results to achieve fast convergence speed after fewer than 10 iterations. The benefits of the proposed design are demonstrated via superior sum-rate performance compared to existing reference designs. Moreover, results showed that the optimal power and sub-carrier allocation help to mitigate the inter-cell interference that directly impacts the system's performance.

Reflecting intelligent surfaces (RIS) has gained significant attention due to its high energy and spectral efficiency in next-generation wireless networks. By using low-cost passive reflecting elements, RIS can smartly reconfigure the signal propagation to extend the wireless communication coverage. On the other hand, non-orthogonal multiple access (NOMA) has been proven as a key air interface technique for supporting massive connections over limited resources. Utilizing the superposition coding and successive interference cancellation (SIC) techniques, NOMA can multiplex multiple users over the same spectrum and time resources by allocating different power levels. This paper proposes a new optimization scheme in a multi-cell RIS-NOMA network to enhance the spectral efficiency under SIC decoding errors. In particular, the power budget of the base station and the transmit power of NOMA users while the passive beamforming of RIS is simultaneously optimized in each cell. Due to objective function and quality of service constraints, the joint problem is formulated as non-convex, which is very complex and challenging to obtain the optimal global solution. To reduce the complexity and make the problem tractable, we first decouple the original problem into two sub-problems for power allocation and passive beamforming. Then, the efficient solution of each sub-problem is obtained in two-steps. In the first-step of For power allocation sub-problem, we transform it to a convex problem by the inner approximation method and then solve it through a standard convex optimization solver in the second-step. Accordingly, in the first-step of passive beamforming, it is transformed into a standard semi-definite programming problem by successive convex approximation and different of convex programming methods. Then, penalty based method is used to achieve a Rank-1 solution for passive beamforming in second-step. Numerical results demonstrate the benefits of the proposed optimization scheme in the multi-cell RIS-NOMA network.