Yongchang Zhu

Yongchang Zhu


Research Focus & Metrics

Academic Career Length

31Years (1996-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 July 2023 in Materials
Verified
Journal Article
Open access
PDF file
LYLiu Yang
Liu Yang
YZYongchang Zhu
Yongchang Zhu
JHJichuan Huo
Jichuan Huo
ZCZhu Cui
Zhu Cui
XZXingquan Zhang
Xingquan Zhang
JFJie Feng
Jie Feng
Low-alkali borosilicate glass was used as the immobilization substrate, and Ce was used to replicate the trivalent and tetravalent actinides, in order to create simulated waste glass through melt heat treatment. The valence of Ce and solubility of CeO2 in waste glass were studied as well as its network structure and thermal and chemical stability. The solubility of Ce in waste glass was examined by XRD and SEM. The network structure was examined by Raman spectroscopy. The valence of Ce was determined by X-ray photoelectron spectroscopy. Thermal analysis and product consistency (PCT) were employed to determine the thermal and chemical stability of waste glasses. The results show that the solubility of cerium in low-alkali borosilicate glasses is at least 25.wt.% and precipitates a spherical CeO2 crystalline phase when it exceeds the solid solution limit; Ce is immobilized in the glass by entering the interstices of the glass network. Depolymerization and the transition from [BO3] to [BO4] occurs when CeO2 doping levels rise. About 60 percent of Ce4+ is converted to Ce3+, and the thermal stability of glass rises then falls with the increase of CeO2. All samples exhibit strong leaching resistance, with the average mass loss of Ce at 28 days being less than 10−4 gm−2d−1.

1 October 2021 in Materials
Verified
Journal Article
Open access
PDF file
Yongchang ZhuYongchang Zhu
Yongchang Zhu
YZYongchang Zhu
Yongchang Zhu
XZXingquan Zhang
Xingquan Zhang
DYDebo Yang
Debo Yang
YHYonglin Huo
Yonglin Huo
BMBaojian Meng
Baojian Meng
In order to increase the loading of rare earth- and molybdenum-rich high-level waste in the waste forms, zirconolite- and powellite-based multi-phase borosilicate glass-ceramics were synthesized via an in-situ heat treatment method. The effects of the CTZ (CaO, TiO2 and ZrO2) content on the crystallization, microstructure and aqueous durability of the multi-phase borosilicate glass-ceramics were studied. The results indicate that the increase of CTZ content can promote crystallization. The glass-ceramics presented even structures when the CTZ content was ≥ 40 wt%. For the glass-ceramic with 40 wt% CTZ, only zirconolite and powellite crystals were detected and powellite crystals were mainly distributed around zirconolite, whereas for the glass-ceramics with 50 wt% CTZ, perovskite was detected. Furthermore, the leaching rates of Na, Ca, Mo and Nd were in the ×10−3, ×10−4, ×10−3 and ×10−5 g·m−2·d·−1 orders of magnitude on the 28th leaching day, respectively.

10 April 1999 in Applied Optics
Verified
Journal Article
Closed access
PDF file
YZYongchang Zhu
Yongchang Zhu
TKTakehiro Koyama
Takehiro Koyama
TTTatsuo Takada
Tatsuo Takada
YMYoshihiro Murooka
Yoshihiro Murooka
TOToshihisa Otsuka
Toshihisa Otsuka
A two-dimensional measurement method for a birefringence vector distribution differs from a point-measurement method not only in the two-dimensional system nonuniformity but also in the system reliability. The previously proposed intrinsic vector allowed for the elimination of the influence of the system nonuniformity, whereas the two-dimensional system reliability is ensured by both an online diagnosis technique and an image lock-in processing. It is revealed that the measured intrinsic vector is relevant not only with the birefringence vector distribution in a sample but also with the natural birefringence vector distributions that exist in the optic components. The complete solution from the measured intrinsic vector results in a bidirectional vector for the desired birefringence vector distribution. The correctness of the two-dimensional measurement principle is examined by means of a comparison of the measured data with that calculated from a finite-element analysis based on the photoelastic effect.

8 August 2022 in Materials
Verified
Journal Article
Open access
PDF file
HLHao Liu
Hao Liu
YZYongchang Zhu
Yongchang Zhu
JHJichuan Huo
Jichuan Huo
ZCZhu Cui
Zhu Cui
XZXingquan Zhang
Xingquan Zhang
BMBaojian Meng
Baojian Meng
In this paper, the effect of doping phosphorus in a borosilicate glass matrix to improve the solubility of Mo was investigated by X-ray diffraction (XRD), Raman, and solid-state nuclear magnetic resonance (NMR) spectroscopy, and the effectiveness of Na content on P species inhibiting the growth of the crystallization of Mo was assessed. The results indicate that phosphate-doped borosilicate glass can host 4 mol% of Mo, and that such a borosilicate glass matrix could only accommodate 1 mol% of Mo without phosphate doping. The effectiveness of phosphorus may be correlated with the Na content in borosilicate glass, and a high Na content borosilicate glass matrix requires more P doping to accommodate Mo. In addition, incorporating large amounts of P can compromise the aqueous durability of the glass matrix.

9 October 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XYXinmin Yu
Xinmin Yu
XDXiurong Du
Xiurong Du
XSXuefu Song
Xuefu Song
YZYongchang Zhu
Yongchang Zhu
XLXing Liu
Xing Liu
KQKai Qiu
Kai Qiu
In this paper, a quartz glass with low hydroxyl groups was prepared by combining the advantages of various processes, using a plasma heat source as the flame and high-purity quartz sand as the raw material. The purity of the quartz sand was 99.997%. The number of air bubbles in the quartz glass prepared using high-purity quartz sand was lower. The hardness and tensile strength of the quartz glass were 737.7–767.1 GPa and 6.88–9.64 MPa, respectively. The hydroxyl content of the sample was only 4.11 ppm, and the hydroxyl content of the homogenized quartz glass was reduced to 2.64 ppm, which was an improvement of about 35%. After homogenization, the fictive temperature (Tf) of the quartz glass was determined to be 1253 cm−1, and the variation of the Tf value along the radial direction was reduced, indicating a more homogeneous glass structure. The stress distribution in the quartz glass was significantly improved. These results indicate that the preparation of quartz glass from high-purity quartz sand using a plasma heat source as the flame opens up new avenues for optical applications.

16 August 1996
Verified
Conference Paper
Closed access
PDF file
KIKeiji Iizuka
Keiji Iizuka
YZYongchang Zhu
Yongchang Zhu
TTTatsuo Takada
Tatsuo Takada
A visualization and quantification technique for dynamic surface charge distribution on a dielectric material has been developed based on electro-optic Pockels effect. 2 Using this technique, the surface charge density and distribution can be measured simultaneously, non-contact and non-destructively. Also by using a high-speed video camera(HVC), the dynamic observation of surface charge distribution can be performed. The measurement sensitivity is further improved by optical phase pulse modulation and the cancellation ofthe natural birefringence distribution due to the residual mechanical stress in optical devices, e.g., optical lens. As an example, the dynamic observation of surface charge distribution was performed when ac 8kV high voltage was applied to a needle electrode set perpendicularly on a Bii2SiO2o(BSO) single crystal.