Inês Santos Afonso

Ms. Inês Santos Afonso

Polytechnic Institute of Bragança, Bragança, Portugal
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 May 2024 in Micromachines
Verified
Journal Article
Open access
PDF file
LNLucas Boniatti Neves
Lucas Boniatti Neves
IAInês Santos Afonso
Inês Santos Afonso
GNGlauco Nobrega
Glauco Nobrega
LBLuiz Gustavo Barbosa
Luiz Gustavo Barbosa
Rui A. LimaRui A. Lima
Rui A. Lima
João RibeiroJoão Ribeiro
João Ribeiro
Polydimethylsiloxane (PDMS) has attracted great attention in various fields due to its excellent properties, but its inherent hydrophobicity presents challenges in many applications that require controlled wettability. The purpose of this review is to provide a comprehensive overview of some key strategies for modifying the wettability of PDMS surfaces by providing the main traditional methods for this modification and the results of altering the contact angle and other characteristics associated with this property. Four main technologies are discussed, namely, oxygen plasma treatment, surfactant addition, UV-ozone treatment, and the incorporation of nanomaterials, as these traditional methods are commonly selected due to the greater availability of information, their lower complexity compared to the new techniques, and the lower cost associated with them. Oxygen plasma treatment is a widely used method for improving the hydrophilicity of PDMS surfaces by introducing polar functional groups through oxidation reactions. The addition of surfactants provides a versatile method for altering the wettability of PDMS, where the selection and concentration of the surfactant play an important role in achieving the desired surface properties. UV-ozone treatment is an effective method for increasing the surface energy of PDMS, inducing oxidation, and generating hydrophilic functional groups. Furthermore, the incorporation of nanomaterials into PDMS matrices represents a promising route for modifying wettability, providing adjustable surface properties through controlled dispersion and interfacial interactions. The synergistic effect of nanomaterials, such as nanoparticles and nanotubes, helps to improve wetting behaviour and surface energy. The present review discusses recent advances of each technique and highlights their underlying mechanisms, advantages, and limitations. Additionally, promising trends and future prospects for surface modification of PDMS are discussed, and the importance of tailoring wettability for applications ranging from microfluidics to biomedical devices is highlighted. Traditional methods are often chosen to modify the wettability of the PDMS surface because they have more information available in the literature, are less complex than new techniques, and are also less expensive.

30 March 2023 in Lubricants
Verified
Journal Article
Open access
PDF file
IAInês Santos Afonso
Inês Santos Afonso
GNGlauco Nobrega
Glauco Nobrega
Rui A. LimaRui A. Lima
Rui A. Lima
JGJosé Gomes
José Gomes
João RibeiroJoão Ribeiro
João Ribeiro
Vegetable oils have been used as metalworking fluids (MWFs) for many years, particularly in small-scale metalworking operations and in industries where environmental regulations are strict. Before the development of modern MWFs, vegetable oils were one of the most common lubricants used for metalworking tools. The use of vegetable oils can be traced back to ancient civilizations such as Egypt, Greece, and Rome, where olive oil was commonly used to lubricate metal tools and weapons. Today, vegetable oils are used as MWFs in a variety of applications. They are often combined with additives or nanoparticles to enhance their performance, such as improving the lubricity, cooling properties, and stability of the oil, as well as reducing friction and wear on the cutting tool. Additives, such as antioxidants, anti-wear agents, and extreme pressure (EP) additives, can be used to improve the performance of vegetable oils as cutting fluids. Compared to standard MWFs, vegetable oils are generally more biodegradable and environmentally friendly, and can be more cost-effective. However, MWFs may offer superior performance in certain areas, such as lubrication and cooling. Ultimately, the choice of MWFs will depend on the specific requirements of the metalworking operation and the balance between performance, cost, and environmental considerations. As the demand for sustainability and environmental responsibility continues, the use of vegetable oils as MWFs is likely to become even more popular in the future. Overall, vegetable oils offer a viable and potentially attractive alternative to standard MWFs in certain applications. This review highlights both conventional and most recent advances in vegetal oils frequently used as lubricant fluids in manufacturing processes.

13 August 2025 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Beatriz D. CardosoBeatriz D. Cardoso
Beatriz D. Cardoso
ASAndrews Souza
Andrews Souza
GNGlauco Nobrega
Glauco Nobrega
IAInês Santos Afonso
Inês Santos Afonso
LNLucas Boniatti Neves
Lucas Boniatti Neves
Rui A. LimaRui A. Lima
Rui A. Lima
Nanofluids (NFs), consisting of nanoparticles (NPs) suspended in base fluids, have attracted growing interest due to their superior physicochemical properties and multifunctional potential. In this review, conventional and green NF technology aspects, including synthesis routes, formulation, and applications, are discussed. Conventional NFs, involving NPs synthesized using physical and chemical approaches, have improved NP morphology control but are likely to cause environmental and safety concerns. In contrast, green NFs that are plant extract, microorganism, and biogenic waste-based represent a sustainable and biocompatible alternative. The effect of key parameters (e.g., NP size, shape, concentration, dispersion stability, and base fluid properties) on the performance of NFs is critically examined. The review also covers potential applications: in biomedical engineering (e.g., drug delivery, imaging, theranostics, and antimicrobial therapies), in heat transfer (e.g., solar collectors, cooling electronics, nuclear reactors), and precision machining (e.g., lubricants and coolants). Comparative insights regarding green versus conventionally prepared NFs are provided concerning their toxicity, environmental impact, scalability, and functional performance across various applications. Overall, this review highlights the new promise of both green and conventional NFs and provides key opportunities and challenges to guide future developments in this field.

14 January 2026 in Progress in Materials Science
Verified
Journal Article
Open access
Beatriz D. CardosoBeatriz D. Cardoso
Beatriz D. Cardoso
GNGlauco Nobrega
Glauco Nobrega
IAInês Santos Afonso
Inês Santos Afonso
ASAndrews Souza
Andrews Souza
LNLucas Boniatti Neves
Lucas Boniatti Neves
Rui A. LimaRui A. Lima
Rui A. Lima

4 August 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
IAInês Santos Afonso
Inês Santos Afonso
JPJosé Pereira
José Pereira
ARAntónio E Ribeiro
António E Ribeiro
Joana AmaralJoana Amaral
Joana Amaral
Nuno RodriguesNuno Rodrigues
Nuno Rodrigues
João RibeiroJoão Ribeiro
João Ribeiro
In this work, we carried out a comparison between the dry machining of an aluminum block with conventional cutting oil and a block with vegetable oil. The two oils had different flow rates. Using the Taguchi method, it was possible to determine the matrices for optimizing the best parameters for each group of tests. Then, we studied the utility of using vegetable oil as a cutting lubricant. We found that the vegetable oil studied in this work had good properties in terms of reducing cutting temperatures but was less effective than conventional cutting oil in reducing the surface roughness of the machined part. Tribological tests were carried out to understand the influence of the selected lubricants in reducing friction and wear. After the sliding experiments, which were performed without lubrication in the presence of the same lubricants that were used in the machining tests and in the presence of distilled water, we concluded that vegetable oil has satisfactory lubricating properties that are similar to those of the conventional cutting fluid, indicating a potential for consideration as an effective alternative to the conventional cutting fluid, with economic, environmental, and health advantages.

15 October 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
IAInês Santos Afonso
Inês Santos Afonso
Manuel Rodríguez MartínManuel Rodríguez Martín
Manuel Rodríguez Martín
João RibeiroJoão Ribeiro
João Ribeiro
Over time, the industrial use of the welding process has grown in significance and is now one of the primary methods for joining metallic parts. During the welding process, metallurgical and structural modifications occur close to the welded joint. The thermal stresses and geometric distortions are undesirable, and they are a challenge to accurately forecast. Laboratory tests were conducted utilizing the GMAW method on S235JR steel as the base material with the goal of examining the impact of the welding sequence on angular distortion in butt joints when comparing three different welding sequences. Equipment that can determine coordinates in the operational space with metrological accuracy was used to measure distortions. As a result of metrological and statistical analyses, it was found that the sequence factor is shown to substantially influence the final distortions and that the symmetrical method results in less distortions followed by a one-step method.