Manuel Rodríguez Martín

Dr. Manuel Rodríguez Martín

Universidad de Salamanaca
orcid
Associate Professor at Universidad de Salamanca

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 May 2017 in IEEE Sensors Journal
Verified
Journal Article
Open access
Manuel Rodríguez MartínManuel Rodríguez Martín
Manuel Rodríguez Martín
PRPablo Rodriguez-Gonzalvez
Pablo Rodriguez-Gonzalvez
Diego Gonzalez-AguileraDiego Gonzalez-Aguilera
Diego Gonzalez-Aguilera
JFJesus Fernandez-Hernandez
Jesus Fernandez-Hernandez
The results of visual inspection of welds in structures and machines depend on both the vision of the inspector and his/her measurement skills. The use of 3-D reconstruction technologies, as the structured light system (SLS), allows the accurate assessment of the weld bead according to the quality criteria. With the proposed procedure in this paper, the extraction of fundamental quality parameters to assess the quality of welds is possible from the 3-D model remotely obtained with the SLS. This procedure enables the extraction of metric information about the thickness and the angle deformation of the welds for each point of the weld and the results can be interpreted both quantitatively (depth map and contour plotted) and qualitatively (by means of a non-dimensional coefficient designed ad-hoc for the evaluation process). Obtained results are validated using a ground truth based on an articulated coordinate measure machine.

7 January 2019 in IEEE Access
Verified
Journal Article
Open access
Pablo Rodríguez-GonzálvezPablo Rodríguez-Gonzálvez
Pablo Rodríguez-Gonzálvez
Manuel Rodríguez MartínManuel Rodríguez Martín
Manuel Rodríguez Martín
Weld bead detection is essential for automated welding inspection processes. Non-invasive passive techniques, such as photogrammetry, are quickly evolving to provide a 3D point cloud with submillimeter precision and spatial resolution. However, its application in weld visual inspection has not been extensively studied. The derived 3D point clouds, despite the lack of topological information, store significant information for the weld-plaque segmentation. Although weld bead detection is being carried out over images or based on laser profiles, its characterization by means of 3D geometrical features have not been assessed. Moreover, it is possible combine machine learning approaches and the 3D features in order to realize the full potential of weld bead segmentation of 3D submillimeter point clouds. In the present manuscript, the novelty is focused in the study of 3D features on real cases to identify the most relevant ones for weld bead detection on the basis of the information gain. For this novel contribution the influence of neighborhood size for covariance matrix computation, decision tree algorithms and split criteria are analyzed to assess the optimal results. Classification accuracy is evaluated by the degree of agreement of the classified data by the kappa index and the area under the receiver operating characteristic (ROC) curve. Experiments show that the proposed novel methodology performs better than 0.85 for the kappa index, and better than 0.95 for ROC area.

17 July 2020 in Sensors
Verified
Journal Article
Open access
PDF file
Manuel Rodríguez MartínManuel Rodríguez Martín
Manuel Rodríguez Martín
JFJose Fueyo
Jose Fueyo
Diego Gonzalez-AguileraDiego Gonzalez-Aguilera
Diego Gonzalez-Aguilera
Francisco J. MadrugaFrancisco J. Madruga
Francisco J. Madruga
Roberto García-MartínRoberto García-Martín
Roberto García-Martín
JPJavier Pisonero
Javier Pisonero
The present article addresses a generation of predictive models that assesses the thickness and length of internal defects in additive manufacturing materials. These modes use data from the application of active transient thermography numerical simulation. In this manner, the raised procedure is an ad-hoc hybrid method that integrates finite element simulation and machine learning models using different predictive feature sets and characteristics (i.e., regression, Gaussian regression, support vector machines, multilayer perceptron, and random forest). The performance results for each model were statistically analyzed, evaluated, and compared in terms of predictive performance, processing time, and outlier sensibility to facilitate the choice of a predictive method to obtain the thickness and length of an internal defect from thermographic monitoring. The best model to predictdefect thickness with six thermal features was interaction linear regression. To make predictive models for defect length and thickness, the best model was Gaussian process regression. However, models such as support vector machines also had significative advantages in terms of processing time and adequate performance for certain feature sets. In this way, the results showed that the predictive capability of some types of algorithms could allow for the detection and measurement of internal defects in materials produced by additive manufacturing using active thermography as a non-destructive test.

14 June 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MEMaria Eduarda Enriconi
Maria Eduarda Enriconi
RRRocío Rodríguez
Rocío Rodríguez
MAMárcia Araújo
Márcia Araújo
JRJoão Rocha
João Rocha
Roberto García-MartínRoberto García-Martín
Roberto García-Martín
Manuel Rodríguez MartínManuel Rodríguez Martín
Manuel Rodríguez Martín
Fused Filament Fabrication (FFF) has become a widely adopted additive manufacturing technology due to its cost-effectiveness, material versatility, and accessibility. However, optimizing process parameters, predicting material behavior, and ensuring structural reliability remain major challenges. This review analyzes state-of-the-art computational methods used in FFF, which are categorized into four main areas: melt flow dynamics, cooling and solidification, thermal–mechanical behavior, and material property characterization. Notably, the integration of Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) has led to improved predictions of key phenomena, such as filament deformation, residual stresses, and temperature gradients. The growing use of fiber-reinforced filaments has further enhanced mechanical performance; however, this also introduces added complexity due to filler orientation effects and interlayer adhesion issues. A critical limitation across existing studies is the lack of standardized experimental validation methods, which hinders model comparability and reproducibility. This review highlights the need for unified testing protocols, more accurate multi-physics simulations, and the integration of AI-based process monitoring to bridge the gap between numerical predictions and real-world performance. Addressing these gaps will be essential to advancing FFF as a precise and scalable manufacturing platform.

15 June 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
João RibeiroJoão Ribeiro
João Ribeiro
GBGuilherme Bueno
Guilherme Bueno
Manuel Rodríguez MartínManuel Rodríguez Martín
Manuel Rodríguez Martín
JRJoão Rocha
João Rocha
Hemp fibers produced by different extraction techniques that were cultivated in the Portuguese districts of Bragança and Mirandela under various nitrogen fertilization and planting density conditions are examined and mechanically described in this paper. The objective of this study is to evaluate the influence of sowing density, nitrogen fertilization, sample location, and extraction method in order to improve the mechanical properties of hemp fibers. To achieve this, we determined the modulus of elasticity, the tensile strength, and the density. The mean value for the modulus of elasticity was 92.44 ± 7.44 GPa, the mean of tensile strength was 564.98 ± 167.03 MPa, and the mean of the density was 1.64 ± 0.24 g cm−3. We performed a statistical analysis of all parameters using ANOVA and found that the retting method had the greatest influence among all parameters. The associated effects of nitrogen fertilization and sowing density revealed an important influence on tensile strength and specific tensile strength, respectively.

19 September 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GNGlauco Nobrega
Glauco Nobrega
MSMaria Sabrina Souza
Maria Sabrina Souza
Manuel Rodríguez MartínManuel Rodríguez Martín
Manuel Rodríguez Martín
Pablo Rodríguez-GonzálvezPablo Rodríguez-Gonzálvez
Pablo Rodríguez-Gonzálvez
João RibeiroJoão Ribeiro
João Ribeiro
In the present work, an analysis of different welding parameters was carried out on the welding of stainless-steel thin thickness tubes by the Gas Metal Arc Welding (GMAW) process. The influence of three main parameters, welding voltage, movement angle, and welding current in the quality of the welds, was studied through a specifically designed experimental process based on the establishment of three different levels of values for each of these parameters. Weld quality is evaluated using destructive testing (macrographic analysis). Specifically, the width and root penetration of the weld bead were measured; however, some samples have been disregarded due to welding defects outside the permissible range or caused by excessive melting of the base metals. Data are interpreted, discussed, and analyzed using the Taguchi method and ANOVA analysis. From the analysis of variance, it was possible to identify the most influential parameter, the welding voltage, with a contribution of 43.55% for the welding penetration and 75.26% for the bead width, which should be considered in the designs of automatic welding processes to improve the quality of final welds.