The Reynolds-averaged Navier–Stokes (RANS)-based generalized actuator disc method along with the Reynolds stress model (AD/RANS_RSM) is assessed for wind turbine wake simulation. The evaluation is based on validations with four sets of experiments for four horizontal-axis wind turbines with different geometrical characteristics operating in a wide range of wind conditions. Additionally, sensitivity studies on inflow profiles (representing isotropic and anisotropic turbulence) for predicting wake effects are carried out. The focus is on the prediction of the evolution of wake flow in terms of wind velocity and turbulence intensity. Comparisons between the computational results and the measurements demonstrate that in the near and transition wake region with strong anisotropic turbulence, the AD/RANS_RSM methodology exhibits a reasonably good match with all the experimental data sets; however, in the far wake region that is characterized by isotropic turbulence, the AD/RANS_RSM predicts the wake velocity quite accurately but appears to over-estimate the wake turbulence level. While the introduction of the overall turbulence intensity is found to give an improved agreement with the experiments. The performed sensitivity study proves that the anisotropic inflow condition is recommended as the profile of choice to represent the incoming wind flow.
The correct prediction of the wind speed and turbulence levels over complex terrain is essential for accurately assessing wind turbine wake recovery, power production, safety, and wind farm design. In this paper, two modified RANS turbulence models are proposed, which are innovative variants of the conventional SST k-ω model and the linear Reynolds stress model (RSM) featuring optimized closure constants. Then, these two modified models and their origin models are applied to compare and analyze wind flows from a 3D hill wind tunnel experiment and two field measurements over typical complex terrain, including Askervein hill and Bolund island, with the aim of analyzing the sensitivity of wind flows to different RANS turbulence models. The study focuses on analyzing the effects of different turbulence models on the self-sustainability of wind speed and turbulent kinetic energy upstream of the computational domain and on the accuracy of wind flow prediction over complex terrain. The results show that our modified RSM model shows better agreement with the available experimental data on the upstream and leeward sides of all simulated hills. The wind speed on the leeward slope is particularly sensitive to the turbulence model, with a maximum difference in the relative root mean square error (RRMSE) that can reach 11% among the four models. The accuracy of the turbulent kinetic energy depends on the self-sustainability of the upstream turbulent kinetic energy and the predictive ability of the turbulence model for separated flows, and the maximum difference in the RRMSE of the four models can reach 47%. In addition, the advantages and disadvantages of the tested models are discussed to provide guidance for model selection during wind flow simulations in complex terrain.
5 July 2021 in Journal of the Chinese Institute of Engineers
An accurate description of incoming wind condition is supposed to be a prerequisite for reliable wake simulations. Taking into account the presence of wind shear effect and the vertical profiles of flow quantities in the atmospheric boundary layer flow, a numerical simulation of complex wind-turbine wakes is conducted by solving the Reynolds-averaged Navier–Stokes equations, with a simple actuator disc model implemented for the rotor effects. The Reynolds Stress Model is introduced to account for the anisotropy of atmospheric turbulence. In addition to the computational fluid dynamics means, a three-dimensional analytical wake model is developed for wake prediction. The results of both numerical simulation and model prediction are applied for validations through several cases, and proved to be of good accuracy in wind-turbine wake modeling.
Wind is one of the main factors raising errors in the spacecraft’s landing phase. As a result, an accurate description of incoming wind conditions is supposed to be a prerequisite for reliable parafoil trajectory planning. This work utilizes the Weather Research Forecast (WRF) model system with efficient parameterization schemes to reproduce the wind field in the main landing area during the landing phase of the “Shen Zhou” series spacecraft mission. In comparison with observational data from several cases, it is validated that the WRF model has the potential to give an accurate imitation of wind behaviors and is expected to be an alternative technique for costly and time-consuming experimental undertakings. Based on the numerical results, a linear model is proposed in the current work, which is applicable to the altitude range, specifically for parafoil trajectory planning. It is validated by comparisons with observational wind properties from radio-sounding stations. In addition, a sixth-order polynomial model is introduced for comparison as well. The results show that the current proposed model has both the characteristics of a simple form and good accuracy. It shows overall better consistency with observational data than the sixth-order polynomial model.
Wind energy faces significant challenges posed by wake-induced power losses, which results from decreased wind velocity and increased turbulence. To address the critical need for optimizing wind farm yaw angles and mitigating such losses, a three-dimensional dual-cosine shape model for predicting yaw wake velocity and turbulence intensity is proposed in this paper. This physics-based engineering framework is designed to predict wake center offset, velocity fields, and turbulence intensity distributions of yawed wind turbines. The model incorporates dual-peak wake distributions and yaw-induced wake deflection mechanisms, while comprehensively considering the influence of multiple factors on wake flow, including inflow wind conditions, local geographical information, turbine aerodynamic characteristics, and operational conditions. In addition, it eliminates the requirement for parameter fitting while maintaining applicability in both near and far-wake regions. Comprehensive validations against experimental data and high-fidelity computational fluid dynamics simulations demonstrate its superiority over existing models, with particular accuracy in capturing wake center trajectory evolution, wake deficit recovery, and turbulence intensity development throughout the yawed wake region. Quantitative error analyses furthermore confirm the model's accuracy and robustness: the relative root mean square error of the proposed wake deflection model generally remains below 10%, and the predicted wake distribution is improved by 20% relative to several existing yaw wake models in most cases (particularly in the far-wake region). This work provides both an effective analytical model for yawed wake dynamics and a practical tool for facilitating the implementation of yaw control strategies to enhance the energy yield of wind farms.