Honeycomb structure with phase change material (PCM) is frequently used in passive thermal management devices. The geometrical shape of the honeycomb core greatly influences the melting rate of the PCM. This paper investigates the melting rates of PCM in honeycomb cores of non-hexagonal cells in comparison with that of hexagonal cell in three Rayleigh numbers. The objective is to find the optimal shape in order to reduce the melting time of the PCM. The constrained melting behaviors of PCM in triangular, quadrilateral, hexagonal, and circular honeycomb cores are numerically studied. The enthalpy porosity technique and finite volume method are used in this paper. The instantaneous liquid fraction and energy absorption of PCM in different honeycomb cores are discussed in detail. The influences of the placed orientation and aspect ratio of different cores on melting rates of PCM are considered. Results show that the melting rate of PCM in a rectangular core is always higher than the hexagonal core for the given aspect ratio and Rayleigh number. The geometrical factor (GF), which indicates the cross-sectional area per unit perimeter, is found to be an important index on the melting rate. At a small Rayleigh number, it takes a longer melting time of the PCM for the core with a larger GF. As the Rayleigh number is large, the melting time of the PCM is affected by both the GF and the orientation of the cores.
The cracks in hydro-turbine runner blades impact turbine unit reliability and stability. The vibration monitoring based on natural frequency variation of hydro-turbine is an accurate and potential online monitoring method. In this paper, the modal characteristics of runner blades with different cracks under flow-induced vibration are studied numerically in different modes. The results indicate that the presence of cracks in the blade leads to a decrease in the natural frequency compared to healthy blades. Furthermore, the natural frequency of the wet mode experiences a significant decrease compared to the dry mode and the prestressed mode. The analysis reveals that cracked blade lead to large frequency difference (fd) of the natural frequencies of the runner mainly at the 4th–12th orders in the prestressed mode. For the wet mode, cracks cause large fd of the natural frequencies of the runner mainly at the 3rd–20th orders, but the most significant ones are at the 3rd–10th orders. The frequency-doubling (ffd) values of runner blade with crack under the 4th–12th orders in the prestressed mode or under the 3rd–10th orders in the wet mode are concentrate on 0.3–1.0. The results of modal analysis can provide a valuable reference for the crack detection of turbine runner.