JISU LEE

Mr. JISU LEE


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 August 2025 in Energies
Verified
Journal Article
Open access
PDF file
Yong-Jun LeeYong-Jun Lee
Yong-Jun Lee
Tae-Gue ParkTae-Gue Park
Tae-Gue Park
CPChan-Ho Park
Chan-Ho Park
SKSu-Jong Kim
Su-Jong Kim
JLJISU LEE
JISU LEE
Seok-Ho RhiSeok-Ho Rhi
Seok-Ho Rhi
This study investigates a novel heat pipe integrated cooling system designed for thermal management of Tesla’s 4680 cylindrical lithium–ion batteries in electric vehicles (EVs). Through a comprehensive approach combining experimental analysis, 1-D AMESim simulations, and 3-D Computational Fluid Dynamics (CFD) modeling, the thermal performance of various wick structures and working fluid filling ratios was evaluated. The experimental setup utilized a triangular prism chamber housing three surrogate heater blocks to replicate the heat generation of 4680 cells under 1C, 2C, and 3C discharge rates. Results demonstrated that a blended fabric wick with a crown-shaped design (Wick 5) at a 30–40% filling ratio achieved the lowest maximum temperature (Tmax of 47.0 °C), minimal surface temperature deviation (ΔTsurface of 2.8 °C), and optimal thermal resistance (Rth of 0.27 °C/W) under 85 W heat input. CFD simulations validated experimental findings, confirming stable evaporation–condensation circulation at a 40% filling ratio, while identifying thermal limits at high heat loads (155 W). The proposed hybrid battery thermal management system (BTMS) offers significant potential for enhancing the performance and safety of high-energy density EV batteries. This research provides a foundation for optimizing thermal management in next-generation electric vehicles.

1 March 2022 in Processes
Verified
Journal Article
Open access
PDF file
JLJISU LEE
JISU LEE
JAJae-Hyun Ahn
Jae-Hyun Ahn
HCHeui-Il Chae
Heui-Il Chae
HLHi-Chan Lee
Hi-Chan Lee
Seok-Ho RhiSeok-Ho Rhi
Seok-Ho Rhi
As the heat dissipation of smart devices increases, cutting-edge cooling solutions are becoming increasingly important. The heat pipe is an efficient device that boosts heat transfer and is recommended to reduce thermal management power. In this study, a concentric annular heat pipe (CAHP) with distilled water as a working fluid is proposed to enhance heat transfer, and experiments and one-dimensional analysis were carried out to predict thermal characteristics and evaluate performance. The CAHP was 90 mm in length, 62 mm in inner diameter, 70 mm in outer diameter, and 0.4 mm in thickness. At the outer surface of the internal CAHP, a two-layer screen mesh wick (500 mesh, Stainless Steel 304) that is 0.34 mm in layer thickness was installed. A ceramic heater (20 mm × 20 mm) was attached to the middle of the outer surface, and the hollow region with 48 fins was cooled by an electric fan. The experiment was carried out with variations in the heat load, the filling ratio of the working fluid, the pitch angle, the roll angle, and the airflow speed, and the one-dimensional analysis was modeled by AMESIM. The experimental results showed that the best thermal resistance of the CAHP was 3.74 °C/W with a supplied heat of 20 W, a pitch angle of −15°, and a Vair of 3 m/s. In addition, the CAHP’s 1-D simulation model using AMESIM was verified through the experimental results. However, although the modeling results according to the inclination angle could not be reflected due to the difficulty of implementing multiple orientation structures in the one-dimensional simulation model, the simulation results were found to be almost consistent with the experimental results. Case studies were conducted to understand the various characteristics of the CAHP using the model, and the optimal volume fraction, the porosity, and the number of layers of the wicks were determined to be 10, 0.345, and 2, respectively.

23 September 2022 in Processes
Verified
Journal Article
Open access
PDF file
KLKye-Bock Lee
Kye-Bock Lee
SESong Eui-Hyeok
Song Eui-Hyeok
JLJISU LEE
JISU LEE
Seok-Ho RhiSeok-Ho Rhi
Seok-Ho Rhi
A theory-based prediction method was used to estimate the friction factor and heat transfer rate in the turbulent flow of a helically coiled tube. The secondary flow produced by a centrifugal force improves heat and mass transfer; therefore, spiral coil pipes are widely used in a variety of industrial applications. The law of the wall and the Reynolds analogy, which states that momentum transfer in a turbulent flow is equivalent to heat transfer, were used in this theoretical method. The logarithmic law was used to characterize the velocity profile in the turbulence-dominated region, and the local wall shear stress variation throughout the circumference of the helical tube wall was considered. The friction factor and heat transfer in the turbulent flow of the helically coiled tube were accurately predicted by the model. Using the Reynolds analogy, the local Nusselt number in the circumferential direction of the helical tube wall was determined. The effect of decreasing local heat transfer within the tube while increasing heat transfer outside the tube was quantified. The analogy between the momentum flux and the heat flux in the turbulent flow of the straight tube was also proven to be applicable to the spiral tube.

12 July 2025 in Energies
Verified
Journal Article
Open access
PDF file
JJJu-Chan Jang
Ju-Chan Jang
TLTaek kyu Lim
Taek kyu Lim
JLJISU LEE
JISU LEE
Seok-Ho RhiSeok-Ho Rhi
Seok-Ho Rhi
Water, acetone, and TiO2/nano-silver water (NSW) nanofluids were investigated as working fluids in loop thermosyphon battery thermal management systems (LTBMS) under simulated electric vehicle (EV) conditions to evaluate scalability and robustness across inclinations (0° to 60°) and ambient temperatures (−10 °C to 20 °C). Experimental conditions were established with 60 °C as the reference temperature, corresponding to the onset of battery thermal runaway, to ensure relevance to critical thermal management scenarios. Results indicate that LTBMS A maintained battery cell temperatures at 50.4 °C with water and 31.6 °C with acetone under a 50 W heat load. In contrast, LTBMS B achieved cell temperatures of 41.8 °C with water and 42.8 °C with 0.01 vol% TiO2 nanofluid, however, performance deteriorated at higher nanofluid concentrations due to increased viscosity and related thermophysical constraints. In heating mode, LTBMS A elevated cell temperatures by 16 °C at an ambient temperature of −10 °C using acetone, while LTBMS B attained 52–55 °C at a 100 W heat load with nanofluids. The lightweight LTBMS design demonstrated superior thermal performance compared to conventional air-cooling systems and performance comparable to liquid-cooling systems. Pure water proved to be the most effective working fluid, while nanofluids require further optimization to enhance their practical applicability in EV thermal management.