Brazil is one of the largest producers of ornamental stones in the world. The state of Espírito Santo has considerable social and economic relevance in the production of ornamental stones, particularly in exportation and the jobs that are directly related to this industry. The objectives of this work were to evaluate the effect of the incorporation of ornamental stone waste on the physical and mechanical properties of red ceramic manufactured using clays and waste from the state of Espírito Santo, and to collaborate to regulate the use of this ornamental stone waste in the ceramic industry when manufacturing products. Ornamental stone wastes were incorporated into the ceramic mass in the following proportions: 0, 10, 20, 30, 40 and 50% by weight. In the elaborated compositions, specimens were prepared by extrusion and were fired at 1050 °C and 1100 °C. After firing, the physical and mechanical properties of the material were analyzed using density, water absorption, porosity, linear shrinkage and mechanical strength. The results indicated an improvement in the properties of the ceramics with the addition of the waste by mass for the two temperatures. Therefore, the lower temperature (1050 °C) can be used to sinter the materials produced whilst obtaining satisfactory results and saving electrical energy. Ornamental stone waste has very promising applications in the ceramic industry.
The ornamental stone industry is growing and has a large production in Brazil, mainly in Espírito Santo, where the largest production in the country is concentrated. Brazil is part of the group of countries that produce the most ornamental stones in the world; however, the generation of waste in this sector is very large. These ornamental stone wastes when used for the manufacture of new materials, such as red ceramics, contribute to the reduction in the raw material clay and to the reduction in the environmental impact. The objective of this work was to incorporate fine wastes from the processing of ornamental stones called FIBRO in red ceramics and later, to contribute to the standardization of the use of these wastes in the ceramic industry, contributing to the manufacture of more economical and sustainable products. Wastes were incorporated in the proportion of 0 to 50% by mass that were prepared by extrusion and fired at 900 °C, 950 °C, and 1000 °C. After firing, the physical and mechanical properties of the ceramic material were evaluated. Specific mass apparent, water absorption, porosity, and flexural strength by three points tests were carried out. The results showed that from 30% at the lowest temperature, tile is already fabricated within the values stipulated by the standards, thus saving energy. The analyzed waste is a material with excellent chemical characteristics to be used in the ceramic mass, in addition to having improved the technological properties of the material, such as less water absorption and greater flexural strength.
The ornamental stone industry plays a crucial role in the world economy, and thus the production process of ornamental stones generates a large volume of waste that is normally destined for landfills. Given the growing market import of artificial stones, there is a need for more sustainable practices to reduce waste and improve the use of natural resources. Thus, the present study aims to develop artificial stones with waste from the ornamental stone extraction process from the quarry, and vegetable polyurethane resin derived from castor oil, in order to analyze its viability in the production of artificial stone slabs. The wastes used in this work were three quartzites, fragmented and mixed with three grain sizes, called coarse, medium, and fine. These wastes were characterized using X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and thermal analysis (TGA/DTG/DSC). Artificial stone slabs were produced using 15 wt.% vegetable polyurethane resin derived from castor oil and 85 wt.% ornamental stone wastes (quartzite). These slabs underwent apparent density, water absorption, porosity, 3-point flexural strength, scanning electron microscopy (SEM), petrography, and X-ray diffraction (XRD) tests. According to the results obtained, it was possible to prove the technical viability of manufacturing artificial stones with ornamental stone wastes and with the use of vegetable polyurethane resin derived from castor oil. The use of these raw materials not only resulted in the manufacture of a new material but also in an environmentally conscious and sustainable approach, following precepts such as the circular economy. The creation of these eco-efficient products is a significant contribution to the search for solutions that value environmental preservation and the optimization of natural resources.
Objective: This work aims to evaluate the physical and alterability properties such as resistance to staining and chemical attack of two natural stones (Siena White and White Marble) and two artificial agglomerated stones (Aldan White and Galaxy White), using Brazilian technical standards as methodology. ABNT NBR 15845 (2015), NBR 16596 (2017) and NBR 10545 (2017). Theoretical Framework: Ornamental stones, such as granite, marble and quartzite, are valued in construction and decoration for their durability and natural beauty. Artificial agglomerated stones are industrially produced to imitate the appearance of natural stones, offering additional advantages such as greater uniformity and resistance. Both options have their various aesthetic and functional applications. Method: Ten specimens measuring 60 x 60 x 20 mm were used for each material. Apparent density, apparent porosity and water absorption tests were carried out. To determine resistance to chemical attack, ABNT NBR 16596 (2017) was used, where the stones were exposed to a variety of chemical agents. The determination of stain resistance was carried out according to the ABNT NBR 10545-14 (2017) standard in an adapted form. The samples were exposed for 24 hours to penetrating agents and household products. Subsequently, the material was classified according to the ease of removing stains, after the cleaning steps described in the standard. Results and Discussion: The results showed that natural stones and artificial agglomerates were satisfactory in meeting the requirements of the ABNT NBR 15844 (2015) standard, as the lower porosity and reduced water absorption generally make these materials more durable and easier to maintain, especially in environments where the Exposure to moisture and liquids is an important factor, such as in kitchens and bathrooms. Research Implications: Evaluate the physical indices, staining and chemical attack of natural stones and artificial agglomerated stones produced by the industry. Originality/Value: Carry out tests on natural stones and artificial agglomerates in materials sold in industry and certify their technological characteristics through tests established by Brazilian standards.
13 November 2023 in Revista de Gestão Social e Ambiental
Objective: The aim of this study was to produce and evaluate the technological properties of artificial agglomerated stone slabs produced using the waste from the stone commercially known as "Preto São Gabriel," using epoxy resin and castor oil-based polyurethane. Theoretical framework: Ornamental stones are widely used in the construction sector and are of great economic importance to the country. During the production stages, a significant amount of waste is generated. The production process generates a substantial amount of waste from the extraction and processing processes that have no economic value, accounting for approximately 40 to 60% of the production during mining, and during the cutting stage, about 30 to 35% is generated. Method: To manufacture the artificial stone slabs, the waste was crushed in a jaw crusher and ceramic plate mill and screened into three particle size ranges. The slabs were produced using the vacuum vibro-compression method. Technological characterization tests were conducted, including bulk density, apparent porosity, water absorption, and three-point strength tests. Results and conclusions: It is concluded that slabs produced with both resins can be applied in locations requiring good flexural strength. For use in areas with water presence, those produced with epoxy resin are recommended, as they exhibited lower porosity and water absorption. Research implications: Utilizing waste from ornamental stones, which amounts to millions of tons and is disposed of in landfills or storage facilities, to manufacture agglomerated stones represents a significant contribution to environmental impact reduction, aligning with the principles of ESG (Environmental, Social, and Corporate Governance). Originality/value: The evaluation of the technological properties of artificial agglomerated stones produced from ornamental stone waste is of fundamental importance for the correct and safe application of these sustainable materials in civil construction.