Ship detection and classification pose critical challenges in maritime surveillance and monitoring. On the one hand, they find applications in civilian domains, like fishery management, illegal immigrant monitoring, and marine rescue. On the other hand, ships are important targets in maritime combat. Ship detection and classification help to obtain timely maritime military intelligence that holds immense importance in seizing control of the maritime battlefield and ensuring the success of military operations [1], [2]. Remote sensing technology, facilitated by sensors mounted on platforms like satellites and airplanes, enables long-distance noncontact imaging of ground targets. It offers high timeliness, wide coverage, and low-cost accessibility and is not constrained by geographic conditions. Consequently, it has emerged as the primary method for monitoring vessels [4], [5].
22 September 2023 in IEEE Geoscience and Remote Sensing Letters
The freeboard height of ship is a critical parameter that mirrors the ship’s load capacity and safety performance. However, research on the height of ship is less explored. This letter derives imaging differences between the top and bottom of the ship’s freeboard based on SAR imaging geometry and then establishes a ship-sea coupling scattering path model. Relying on the proposed model and the polarimetric synthetic aperture radar’s (PolSAR) capability to differentiate various scattering mechanisms, a method for retrieving the freeboard height of ships is proposed. This method primarily utilizes the total backscattering power SPAN and double-bounce scattering component (DBL) features of single-pass PolSAR data acquired with a single antenna. Finally, the proposed method is verified by the in-situ data and tested on different types of ships, such as cargo ships and bulk carriers, and the absolute relative error (ARE) of the retrieval results is less than 6.1%.
Monocular 3D object detection is very challenging in autonomous driving due to the lack of depth information. This paper proposes a one-stage monocular 3D object detection network (MDS Net), which uses the anchor-free method to detect 3D objects in a per-pixel prediction. Firstly, a novel depth-based stratification structure is developed to improve the network’s ability of depth prediction, which exploits the mathematical relationship between the size and the depth in the image of an object based on the pinhole model. Secondly, a new angle loss function is developed to further improve both the accuracy of the angle prediction and the convergence speed of training. An optimized Soft-NMS is finally applied in the post-processing stage to adjust the confidence score of the candidate boxes. Experiment results on the KITTI benchmark demonstrate that the proposed MDS-Net outperforms the existing monocular 3D detection methods in both tasks of 3D detection and BEV detection while fulfilling real-time requirements.
Three-dimensional 3D printing binders are important in the modern industry. Several types of binders and printing materials are used. Thus, printing binder requirements differ considerably depending on the printing methods utilized. In this study, the characteristics and research status of biomimetic materials and polymer binders used in Selective Laser Sintering-based printing (SLS), Spray molding technology (such as, solid inkjet printing [3DP] and Metal binder jet printing (MBJ), and extruded bio-printing technology (EBP) are reviewed.
Monocular 3D object detection is very challenging in autonomous driving due to the lack of depth information. This paper proposes a one-stage monocular 3D object detection algorithm based on multi-scale depth stratification, which uses the anchor-free method to detect 3D objects in a per-pixel prediction. In the proposed MDS-Net, a novel depth-based stratification structure is developed to improve the network's ability of depth prediction by establishing mathematical models between depth and image size of objects. A new angle loss function is then developed to further improve the accuracy of the angle prediction and increase the convergence speed of training. An optimized soft-NMS is finally applied in the post-processing stage to adjust the confidence of candidate boxes. Experiments on the KITTI benchmark show that the MDS-Net outperforms the existing monocular 3D detection methods in 3D detection and BEV detection tasks while fulfilling real-time requirements.