A III-nitride red LED with an active region temperature of 835 °C on a Si substrate utilizing a strain-relaxed template (SRT) is demonstrated. The peak wavelength blueshifts from 670 nm at 1 A/cm2 to 636 nm at 150 A/cm2. The on-wafer external quantum efficiency was 0.021% at 7 A/cm2 with an emission wavelength of 655 nm. The LED grown on a Si substrate exhibited a 116 nm redshift when compared to a co-loaded LED grown on sapphire. This is attributed to the difference in strain state for the III-nitride layers grown on Si compared to sapphire, allowing for more indium to be incorporated in the LED grown on Si. This suggests efficient III-nitride red LEDs and µLEDs on Si with a SRT can be realized with further material, device structure, and processing optimizations.
Electrically driven c-plane InGaN-based blue edge emitting laser diodes on a strain-relaxed template (SRT) are successfully demonstrated. The relaxation degree of the InGaN buffer was 26.6%, and the root mean square (RMS) roughness of the surface morphology was 0.65 nm. The laser diodes (LDs) on the SRT laser at 459 nm had a threshold current density of 52 kA/cm2 under the room temperature pulsed operation. The internal loss of the LDs on the SRT was 30–35 cm−1. Regardless of the high threshold current density, this is the first demonstrated laser diode using the strain-relaxed method on c-plane GaN.
1 January 2025 in Japanese Journal of Applied Physics
We have successfully demonstrated InGaN/GaN edge-emitting laser diodes (EELDs) on a fully coalesced epitaxial lateral overgrown film from a c-plane GaN substrate. We achieve a high aspect ratio, and low defect density wing region covering 75%–88% of the substrates’ surface, which is amongst the largest reported areas in the literature. The devices at the wing region exhibit a threshold current density of 3.63 kA cm−2 at 408 nm, and an improved laser performance compared to the high defect density region is confirmed. Based on this work, it is promising that high performance, cost-efficient c-plane InGaN/GaN EELDs can be realized.
InGaN based c-plane blue LDs on strain relaxed template (SRT) with a reduced absorption loss was demonstrated. The loss is reduced from 27 cm−1 to 20 cm−1. Due to the lower loss, threshold current density is improved from 51.1 kA/cm2 to 43.7 kA/cm2, and slope efficiency is also increased by a factor of 1.22. The absorption loss from decomposition layer (DL) in SRT is confirmed to be a major extra loss source by both experimental and simulation results. With a higher indium content in buffer and waveguide layers, optical leakage into DL can be suppressed.