Ventilated façades can help to reduce summer building thermal loads and, therefore, energy consumption due to air-conditioning systems thanks to the combined effect of the solar radiation reflection and the natural or forced ventilation into the cavity. The evaluation of ventilated façades behavior and performance is complex and requires a complete thermo-fluid dynamic analysis. In this study, a computational fluid dynamic (CFD) methodology has been developed for the complete assessment of the energy performance of a prefabricated timber–concrete composite ventilated façade module in different operating conditions. Global numerical results are presented as well as local ones in terms of heat flux, air velocity, and temperature inside the façade cavity. The results show the dependency of envelope efficiency on solar radiation, the benefits that natural convection brings on potential energy savings and the importance of designing an optimized façade geometry. The results concerning the façade behavior have been thoroughly compared with International Standards, showing the good accuracy of the model with respect to these well-known procedures. This comparison allowed also to highlight the International Standards procedures limits in evaluating the ventilated façade behavior with the necessary level of detail, with the risk of leading to design faults.

The integration of oxygen transport membranes in industrial processes can lead to energy and economic advantages, but proof of concept membrane modules are highly necessary to demonstrate the feasibility of this technology. In this work, we describe the development of a lab-scale module through a comprehensive study that takes into consideration all the relevant technological aspects to achieve a prototype ready to be operated in industrial environment. We employed scalable techniques to manufacture planar La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δ membrane components suitable for the application in both 3- and 4-end mode, designed with a geometry that guarantees a failure probability under real operating conditions as low as 2.2 × 10⁻⁶. The asymmetric membranes that act as separation layers showed a permeation of approx. 3 NmL/min/cm² at 900 °C in air/He gradient, with a remarkable stability up to 720 h, and we used permeation results to develop a CFD model that describes the influence of the working conditions on the module performance. The housing of the membrane component is an Inconel 625 case joined to the membrane component by means of a custom-developed glass–ceramic sealant that exhibited a remarkable thermo-chemical compatibility both with metal and ceramic, despite the appearance of chemical strain in LSCF at high temperature. The multi-disciplinary approach followed in this work is suitable to be adapted to other module concepts based on membrane components with different dimensions, layouts or materials.