As the second most predominant greenhouse gas, methane-targeted emission mitigation holds the potential to decelerate the pace of global warming. Satellite remote sensing is an important monitoring tool, and we review developments in the satellite detection of methane. This paper provides an overview of the various types of satellites, including the various instrument parameters, and describes the different types of satellite retrieval algorithms. In addition, the currently popular methane point source quantification method is presented. Based on existing research, we delineate the classification of methane remote sensing satellites into two overarching categories: area flux mappers and point source imagers. Area flux mappers primarily concentrate on the assessment of global or large-scale methane concentrations, with a further subclassification into active remote sensing satellites (e.g., MERLIN) and passive remote sensing satellites (e.g., TROPOMI, GOSAT), contingent upon the remote sensing methodology employed. Such satellites are mainly based on physical models and the carbon dioxide proxy method for the retrieval of methane. Point source imagers, in contrast, can detect methane point source plumes using their ultra-high spatial resolution. Subcategories within this classification include multispectral imagers (e.g., Sentinel-2, Landsat-8) and hyperspectral imagers (e.g., PRISMA, GF-5), contingent upon their spectral resolution disparities. Area flux mappers are mostly distinguished by their use of physical algorithms, while point source imagers are dominated by data-driven methods. Furthermore, methane plume emissions can be accurately quantified through the utilization of an integrated mass enhancement model. Finally, a prediction of the future trajectory of methane remote sensing satellites is presented, in consideration of the current landscape. This paper aims to provide basic theoretical support for subsequent scientific research.
1 August 2021 in Journal of the Atmospheric Sciences
The plane-parallel atmosphere as an underlying assumption in physics is appropriately used in the rigorous numerical simulation of the atmospheric radiative transfer model (RTM) with incident solar light. The solar irradiance is a constant with the plane-parallel assumption, which is attributed to the small difference in the distance between any point on Earth’s surface to the sun. However, at night, atmospheric RTMs use the moon as a unique incident light source in the sky. The Earth–moon distance is approximately 1/400 of the Earth–sun distance. Thus, the varying Earth–moon distance on Earth’s surface can influence the top of atmosphere (TOA) lunar irradiance for the plane-parallel atmosphere assumption. In this investigation, we observe that the maximum biases in Earth–moon distance and day/night band lunar irradiance at the TOA are ±1.7% and ±3.3%, respectively, with the plane-parallel assumption. According to our calculations, this bias effect on the Earth–moon distance and lunar irradiance shows a noticeable spatiotemporal variation on a global scale that can impact the computational accuracy of an RTM at night. In addition, we also developed a fast and portable correction algorithm for the Earth–moon distance within a maximum bias of 18 km or ±0.05%, because of the relatively low computational efficiency and the large storage space necessary for the standard ephemeris computational software. This novel correction algorithm can be easily used or integrated into the atmospheric RTM at night.
Atmospheric carbon dioxide (CO2) is recognized as the most important component of the greenhouse gases, the concentration of which has increased rapidly since the pre-industrial era due to anthropogenic emissions of greenhouse gases (GHG). The accurate monitoring of carbon dioxide is essential to study the global carbon cycle and radiation budget on Earth. The Aerosol and Carbon Detection Lidar (ACDL) instrument onboard the Atmospheric Environmental Monitoring Satellite (AEMS) was successfully launched in April 2022, which allows a new perspective to quantify the global spatial distribution of atmospheric CO2 with high accuracy. In this work, the impact of the Doppler shift on CO2 measurements for an integrated-path differential absorption (IPDA) light detection and ranging (lidar) system was evaluated to meet the weighted column-averaged mixing ratio of carbon dioxide (XCO2) measurement requirements of less than one part per million (ppm). The measurement uncertainties due to the Doppler shift were first evaluated in airborne IPDA observations. The result shows that most of the Doppler shift is in the range of 6–8 MHz, resulting in 0.26-0.39 ppm deviations in the XCO2 results. The deviations between the XCO2 retrievals and in situ measurements decreased to 0.16 ppm after the correction of the Doppler shift from 11:28:29 to 11:28:49 in the flight campaign. In addition, the online Doppler shift accounts for 98% of the deviations between XCO2 retrievals and in situ measurements. Furthermore, the impact of the Doppler shift on ACDL measurements is also assessed. The differences between the XCO2 retrievals with and without Doppler shift are used to quantify measurement uncertainties due to the Doppler effect. The simulations reveal that a pointing misalignment of 0.067 mrad can lead to a mean bias of about 0.30 ppm (0.072%) in the CO2 column. In addition, CO2 measurements are more sensitive to the Doppler shift at high altitudes for IPDA lidar, so the largest differences in the CO2 columns are found on the Qinghai–Tibet Plateau in China.
Near-real-time precipitation retrieval plays an important role in the study of the evolutionary process of precipitation and the prevention of disasters caused by heavy precipitation. Compared with ground-based precipitation observations, the infrared precipitation estimations from geostationary satellites have great advantages in terms of geographical coverage and temporal resolution. However, precipitation retrieved from multispectral infrared data still faces challenges in terms of accuracy, especially in extreme cases. In this paper, we propose a new paradigm for satellite multispectral infrared data retrieval of precipitation and construct a new model called PrecipGradeNet. This model uses FY-4A L1 FDI data as the input, IMERG precipitation data as the training target, and improves the precipitation retrieval accuracy by grading the precipitation intensity through Res-UNet, a semantic segmentation network. To evaluate the precipitation retrieval of the model, we compare the retrieval results with the FY-4A L2 QPE operational product to the IMERG precipitation. IMERG is considered as the ground truth. We evaluate the precipitation retrieval from the precipitation fall area identification, the precipitation intensity interval discrimination, and the precipitation quantification. Experimental results show that PrecipGradeNet has better overall performance compared with the FY-4A QPE product in precipitation fall area identification with POD increased by 48% and CSI and HSS improved by 21% and 14%. PrecipGradeNet also has better performance in light precipitation with POD increased by 114% and CSI and HSS improved by 64% and 52%, and better overall precipitation quantification, with RMSE and CC improved by 16% and 15%. In addition, PrecipGradeNet avoids the overall bias in the low and extreme high precipitation cases. Therefore, the new paradigm proposed in this paper has the potential to improve the retrieval accuracy of satellite precipitation estimation products. This study suggests that the application of semantic segmentation methods may provide a new path to correct the intensity bias of the satellite-based precipitation products.
Clouds can block solar radiation from reaching the surface, so timely and effective cloud cover test and forecasting is critical to the operation and economic efficiency of photovoltaic (PV) plants. Traditional cloud cover algorithms based on meteorological satellite observation require many auxiliary data and computing resources, which are hard to implement or transplant for applications at PV plants. In this study, a portable and fast cloud mask algorithm (FCMA) is developed to provide near real-time (NRT) spatial-temporally matched cloud cover products for PV plants. The geostationary satellite imager data from the Advanced Himawari Imager aboard Himawari-8 and the related operational cloud mask algorithm (OCMA) are employed as benchmarks for comparison and validation. Furthermore, the ground-based manually observed cloud cover data at seven quintessential stations at 08:00 and 14:00 BJT (Beijing Time) in 2017 are employed to verify the accuracy of cloud cover data derived from FCMA and OCMA. The results show a high consistency with the ground-based data, and the average correlation coefficient (R) is close to 0.85. Remarkably, the detection accuracy of FCMA is slightly higher than that of OCMA, demonstrating the feasibility of FCMA for providing NRT cloud cover at PV plants.
The accuracy and consistency of Earth observation (EO) instrument radiometric calibration is a fundamental prerequisite for achieving accurate results and delivering reliable predictions. Frequent calibration and validation (Cal/Val) activities are needed during the instrument’s lifetime, and this procedure is often extended to historical archives. Numerous satellites in orbit and proposed future missions have incorporated lunar observation into their vicarious calibration components over recent years, facilitated by the extreme long-term photometric stability of the Moon. Since the birth of the first lunar calibration reference model, lunar-dependent calibration techniques have developed rapidly, and the application and refinement of the lunar radiometric model have become a welcome research focus in the calibration community. Within the context of the development of lunar observation activities and calibration systems globally, we provide a comprehensive review of the activities and results spawned by treating the Moon as a reference for instrument response and categorize them against the understanding of lunar radiometric reference. In general, this appears to be a process of moving from data to instruments, then back into data, working towards a stated goal. Here we highlight lunar radiometric models developed by different institutions or agencies over the last two decades while reporting on the known limitations of these solutions, with unresolved challenges remaining and multiple lunar observation plans and concepts attempting to address them from various perspectives, presenting a temporal development. We also observe that the methods seeking uncertainty reduction at this stage are rather homogeneous, lacking the combination of approaches or results from lunar surface studies conducted by many spacecraft missions, and joint deep learning methods to extract information. The factors that influence the accuracy of the measurement irradiance may be regulated when practical models arrive. As a central element in lunar calibration, the development of an absolute radiometric datum helps to better understand the Earth system.