As the second most predominant greenhouse gas, methane-targeted emission mitigation holds the potential to decelerate the pace of global warming. Satellite remote sensing is an important monitoring tool, and we review developments in the satellite detection of methane. This paper provides an overview of the various types of satellites, including the various instrument parameters, and describes the different types of satellite retrieval algorithms. In addition, the currently popular methane point source quantification method is presented. Based on existing research, we delineate the classification of methane remote sensing satellites into two overarching categories: area flux mappers and point source imagers. Area flux mappers primarily concentrate on the assessment of global or large-scale methane concentrations, with a further subclassification into active remote sensing satellites (e.g., MERLIN) and passive remote sensing satellites (e.g., TROPOMI, GOSAT), contingent upon the remote sensing methodology employed. Such satellites are mainly based on physical models and the carbon dioxide proxy method for the retrieval of methane. Point source imagers, in contrast, can detect methane point source plumes using their ultra-high spatial resolution. Subcategories within this classification include multispectral imagers (e.g., Sentinel-2, Landsat-8) and hyperspectral imagers (e.g., PRISMA, GF-5), contingent upon their spectral resolution disparities. Area flux mappers are mostly distinguished by their use of physical algorithms, while point source imagers are dominated by data-driven methods. Furthermore, methane plume emissions can be accurately quantified through the utilization of an integrated mass enhancement model. Finally, a prediction of the future trajectory of methane remote sensing satellites is presented, in consideration of the current landscape. This paper aims to provide basic theoretical support for subsequent scientific research.
Atmospheric carbon dioxide (CO2) is recognized as the most important component of the greenhouse gases, the concentration of which has increased rapidly since the pre-industrial era due to anthropogenic emissions of greenhouse gases (GHG). The accurate monitoring of carbon dioxide is essential to study the global carbon cycle and radiation budget on Earth. The Aerosol and Carbon Detection Lidar (ACDL) instrument onboard the Atmospheric Environmental Monitoring Satellite (AEMS) was successfully launched in April 2022, which allows a new perspective to quantify the global spatial distribution of atmospheric CO2 with high accuracy. In this work, the impact of the Doppler shift on CO2 measurements for an integrated-path differential absorption (IPDA) light detection and ranging (lidar) system was evaluated to meet the weighted column-averaged mixing ratio of carbon dioxide (XCO2) measurement requirements of less than one part per million (ppm). The measurement uncertainties due to the Doppler shift were first evaluated in airborne IPDA observations. The result shows that most of the Doppler shift is in the range of 6–8 MHz, resulting in 0.26-0.39 ppm deviations in the XCO2 results. The deviations between the XCO2 retrievals and in situ measurements decreased to 0.16 ppm after the correction of the Doppler shift from 11:28:29 to 11:28:49 in the flight campaign. In addition, the online Doppler shift accounts for 98% of the deviations between XCO2 retrievals and in situ measurements. Furthermore, the impact of the Doppler shift on ACDL measurements is also assessed. The differences between the XCO2 retrievals with and without Doppler shift are used to quantify measurement uncertainties due to the Doppler effect. The simulations reveal that a pointing misalignment of 0.067 mrad can lead to a mean bias of about 0.30 ppm (0.072%) in the CO2 column. In addition, CO2 measurements are more sensitive to the Doppler shift at high altitudes for IPDA lidar, so the largest differences in the CO2 columns are found on the Qinghai–Tibet Plateau in China.
22 March 2024 in IEEE Transactions on Geoscience and Remote Sensing
Atmospheric carbon dioxide (CO 2 ) is the primary anthropogenic driver of climate change, accounting for more than half of the total effective radiative forcing (ERF). Active remote-sensing technique using differential absorption Lidar (DIAL) is recognized as the most promising remote sensing means for atmospheric carbon dioxide measurements. The Aerosol and Carbon Detection Lidar (ACDL) instrument onboard the DQ-1 is dedicated to quantifying the global spatial distribution of atmospheric CO 2 . To meet the requirement of accuracy and precision, a reasonable averaging scheme for ACDL measurements is needed to minimize the effect of random noise of observations on CO 2 retrievals. In this study, three averaging schemes were conducted in the retrieval process: averaging of CO 2 columns (AVX), averaging of differential absorption optical depth (AVD), and averaging of signals (AVS). The performances were compared at three representative sites. The experiments were first carried out on simulations. The results show that the optimal size of the averaging window is 50 km, corresponding to an averaging of measurements over 150 pulse pairs. In addition, the AVX and AVD schemes are less affected by altitude variations and can be applied to surfaces with moderate and severe topographic variation, such as hills and mountains. Whereas the AVS method is more suitable for surfaces with slight topographic variation, such as oceans, plains, and terraces. Furthermore, the ACDL observations were also retrieved by applying three averaging schemes and validated against ground-based TCCON measurements at Xianghe station. The AVS scheme exhibits better performance than the AVX and AVD methods with the lowest biases of less than 0.5 ppm, which is consistent with the simulation results.
Atmospheric Infrared Ultraspectral Sounder (AIUS) aboard the Chinese GaoFen-5 satellite was launched on 9 May 2018. It is the first hyperspectral occultation spectrometer in China. The spectral quality assessment of AIUS measurements at the full and representative spectral bands was presented by comparing the transmittance spectra of measurements with that of simulations. AIUS measurements agree well with simulations. Statistics show that more than 73% of the transmittance differences are within ±0.05 and more than 91% of the transmittance differences are within ±0.1. The spectral windows for O, HO, temperature, CO, CH, and HCl were also analyzed. The comparison experiments indicate that AIUS data can provide reliable data for O, HO, temperature, CO, CH, and HCl detection and dynamic monitoring. The HO profiles were then retrieved from AIUS measurements, and the precision, resolution, and accuracy of the HO profiles are discussed. The estimated precision is less than 1.3 ppmv (21%) below 57 km and about 0.9–2.4 ppmv (20–31%) at 60–90 km. The vertical resolution of HO profiles is better than 5 km below 32 km and about 5–8 km at 35–85 km. Comparisons with MLS Level 2 products indicate that the mean HO profiles of AIUS have a good agreement with those of MLS. The relative differences are mostly within ±10% at 16–75 km and about 10–15% at 16–20 km in 60–80 S. For 60–65 S in December, the relative differences are within ±5% between 22 km and 80 km. The HO profiles retrieved from AIUS measurements are credible for scientific research.
27 March 2024 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
The Atmospheric Infrared Ultra-Spectral Sounder (AIUS) is China's first infrared occultation spectrometer onboard the GaoFen-5 satellite. This instrument provides measurements in the near- infrared and mid- infrared spectral regions with a spectral resolution of 0.02 cm $^{-1}$ , monitoring key greenhouse gases like methane (CH $_{4}$ ). In this study, we have developed a physics-based retrieval algorithm for accurately deriving methane mole fraction profiles from infrared absorption spectra. The retrieval algorithm is applied to AIUS and successfully obtains methane mole fraction profiles from January to December 2019 over Antarctic. The validation results show that the retrieval algorithm has a satisfactory performance using AIUS measurements, with average relative standard deviation of the differences less than 7.2 % throughout the altitude range of 10-70 km.
The effective monitoring of methane (CH4) point sources is important for climate change research. Satellite-based observations have demonstrated significant potential for emission estimation. In this study, the methane plumes with different emission rates are modelled and pseudo-observations with diverse spatial resolution, spectral resolution, and signal-to-noise ratios (SNR) are simulated by the radiative transfer model. The iterative maximum a posteriori–differential optical absorption spectroscopy (IMAP-DOAS) algorithm is applied to retrieve the column-averaged methane dry air mole fraction (XCH4), a three-dimensional matrix of estimated plume emission rates is then constructed. The results indicate that an optimal plume estimation requires high spatial and spectral resolution alongside an adequate SNR. While a spatial resolution degradation within 120 m has little impact on quantification, a high spatial resolution is important for detecting low-emission plumes. Additionally, a fine spectral resolution (<5 nm) is more beneficial than a higher SNR for precise plume retrieval. Scientific SNR settings can also help to accurately quantify methane plumes, but there is no need to pursue an overly extreme SNR. Finally, miniaturized spectroscopic systems, such as dispersive spectrometers or Fabry–Pérot interferometers, meet current detection needs, offering a faster and resource-efficient deployment pathway. The results can provide a reference for the development of current detection instruments for methane plumes.