While interrupting the large current in vacuum circuit breaker, the surface temperature of both electrodes will rise due to the arc current Joule heating process; the surface profile gets rough due to the vacuum arc burning on electrodes nonuniformly; and protrusions are simultaneously generated, which may potentially lead to late discharge. In this paper, the random discharge after current zero is reported, and the particle phenomenon is observed as considered to be responsible for the late discharge phenomenon previously. The authors develop a synthetic experiment system, which consists of current source, voltage source, control units, and the observation system. The high-speed video camera is used to record the particle motion in the interelectrode space. Using this system, the motion of small particles is tracked. From the particle information in each frame, the size and speed of the particle are calculated to be within 160 μm and 100 m/s, respectively; the charge quantity of small particles is derived as less than 10-11 C. Furthermore, the surface field enhancement factor is deduced from the particle detachment model, which lays in hundred orders. Since observed particles cannot directly lead to the observed current, possible reasons for the late discharge would be Townsend type metal vapor discharge, and the vapor comes from high-temperature electrode surface and protrusions.
Achieving multiple vortex beams with different modes in a planar microstrip array is pivotal, yet still extremely challenging. Here, a hybrid method combining both Pancharatnam−Berry (PB) phase that is induced by the rotation phase and excitation phase of a feeding line has been proposed for decoupling two orthogonal circularly polarized vortex beams. Theoretical analysis is derived for array design to generate quad vortex beams with different directions and an arbitrary number of topological charges. On this basis, two 8 × 8 planar arrays were theoretically designed in an X band, which are with topological charges of l1 = −1, l2 = 1, l3 = −1, and l4 = 1 in Case I and topological charges of l1 = −1, l2 = 1, l3 = −1, and l4 = 1 in Case II. To further verify the above theory, the planar array in Case I is fabricated and analyzed experimentally. Dual-LP beams are realized by using rectangular patch elements with two orthogonally distributed feeding networks on different layers based on two types of feeding: proximity coupling and aperture coupling. Both the numerical simulation and experimental measurement results are in good agreement and showcase the corresponding quad-vortex-beam characteristics within 8~12 GHz. The array achieves a measured S11 < −10 dB and S22 < −10 dB bandwidth of more than 33.4% and 29.2%, respectively. In addition, the isolation between two ports is better than −28 dB. Our strategy provides a promising way to achieve large capacity and high integration, which is of great benefit to wireless and radar communication systems.