In arid climates, a significant portion of the urban peak energy demand is dedicated to cooling and air-conditioning during the summer. The rapid urbanization rates in developing countries, particularly in the Gulf Cooperation Council (GCC), have intensified the pressure on energy resources to meet the indoor comfort needs of residents. As a result, there has been a substantial increase in energy demand, with a 2.3% rise recorded in 2018. Electricity consumption in residential buildings accounted for over 48.6% of the total electricity consumption. The choice of building fabrics used in a residential building can significantly impact the building’s passive performance and carbon footprint. This study aimed to enhance our understanding of how specific fabric details influence cooling energy usage in arid climates. To achieve this, a validation simulation model was initially created as a base case for a residential housing typology in Al Ain, UAE. This was followed by a parametric energy evaluation of various building envelope features. The evaluation was based on the reduction of yearly cooling load energy. The simulation results indicate that incorporating 50 mm of expanded polystyrene insulation into the outside walls significantly reduced energy consumption for cooling requirements in the arid UAE climate. Furthermore, no substantial difference was observed in the various roofing choices, including cool and green roofs, gravels, and sand roofs. Additionally, we concluded that the total solar energy transmittance (g-value) of windows played a more significant role than thermal transmittance (U-value) in reducing solar heat gain within the spaces. These findings should guide strategic decisions on building envelope upgrading for sustainable societies.

The use of air-conditioning, the largest energy demand for buildings in the tropics, is increasing as regional population and affluence grow. The majority of installed systems are split type air-conditioners. While the performance of new equipment is much better, the influence of the microclimate where the condensing units are installed is often overlooked. Several studies have used CFD simulations to analyse the stack effect, a buoyancy-driven airflow induced by heat rejected from condensing units. This leads to higher on-coil temperatures, deteriorating the performance of the air-conditioners. We present the first field measurements from a 24-storey building in Singapore. A network of wireless temperature sensors measured the temperature around the stack of condensing units. We found that the temperatures in the void space increased continuously along the height of the building by 10–13°C, showing a significant stack effect from the rejected heat from condensing units. We also found that hot air gets stuck behind louvres, built as aesthetic barriers, which increases the temperature another 9°C. Temperatures of around 50°C at the inlet of the condensing units for floors 10 and above are the combined result, reducing the unit efficiency by 32% compared to the undisturbed design case. This significant effect is completely neglected in building design and performance evaluation, and only with an integrated design process can truly efficient solutions be realised

Natural ventilation is gaining more attention from architects and engineers as an alternative way of cooling and ventilating indoor spaces. Based on building types, it could save between 13 and 40% of the building cooling energy use. However, this needs to be implemented and operated with a well-designed and integrated control system to avoid triggering discomfort for occupants. This paper seeks to review, discuss, and contribute to existing knowledge on the application of control systems and optimisation theories of naturally ventilated buildings to produce the best performance. The study finally presents an outstanding theoretical context and practical implementation for researchers seeking to explore the use of intelligent controls for optimal output in the pursuit to help solve intricate control problems in the building industry and suggests advanced control systems such as fuzzy logic control as an effective control strategy for an integrated control of ventilation, heating and cooling systems.